scsi: ncr5380: Clean up dead code and redundant macro usage

[linux-2.6-microblaze.git] / drivers / scsi / atari_scsi.c

diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 105b353..2b6eb7c 100644 (file)
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -178,37 +178,6 @@ static int scsi_dma_is_ignored_buserr(unsigned char dma_stat)
 }
 
 
-#if 0
-/* Dead code... wasn't called anyway :-) and causes some trouble, because at
- * end-of-DMA, both SCSI ints are triggered simultaneously, so the NCR int has
- * to clear the DMA int pending bit before it allows other level 6 interrupts.
- */
-static void scsi_dma_buserr(int irq, void *dummy)
-{
-       unsigned char dma_stat = tt_scsi_dma.dma_ctrl;
-
-       /* Don't do anything if a NCR interrupt is pending. Probably it's just
-        * masked... */
-       if (atari_irq_pending(IRQ_TT_MFP_SCSI))
-               return;
-
-       printk("Bad SCSI DMA interrupt! dma_addr=0x%08lx dma_stat=%02x dma_cnt=%08lx\n",
-              SCSI_DMA_READ_P(dma_addr), dma_stat, SCSI_DMA_READ_P(dma_cnt));
-       if (dma_stat & 0x80) {
-               if (!scsi_dma_is_ignored_buserr(dma_stat))
-                       printk("SCSI DMA bus error -- bad DMA programming!\n");
-       } else {
-               /* Under normal circumstances we never should get to this point,
-                * since both interrupts are triggered simultaneously and the 5380
-                * int has higher priority. When this irq is handled, that DMA
-                * interrupt is cleared. So a warning message is printed here.
-                */
-               printk("SCSI DMA intr ?? -- this shouldn't happen!\n");
-       }
-}
-#endif
-
-
 static irqreturn_t scsi_tt_intr(int irq, void *dev)
 {
        struct Scsi_Host *instance = dev;