default n
depends on BLOCK
depends on SCSI_MOD
- ---help---
+ help
Provides RAID
config SCSI
select SCSI_DMA if HAS_DMA
select SG_POOL
select BLK_SCSI_REQUEST
- ---help---
+ help
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
the name of your SCSI host adapter (the card inside your computer
bool "legacy /proc/scsi/ support"
depends on SCSI && PROC_FS
default y
- ---help---
+ help
This option enables support for the various files in
/proc/scsi. In Linux 2.6 this has been superseded by
files in sysfs but many legacy applications rely on this.
tristate "SCSI disk support"
depends on SCSI
select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY
- ---help---
+ help
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
USB storage or the SCSI or parallel port version of
config CHR_DEV_ST
tristate "SCSI tape support"
depends on SCSI
- ---help---
+ help
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
tristate "SCSI CDROM support"
depends on SCSI && BLK_DEV
select CDROM
- ---help---
+ help
If you want to use a CD or DVD drive attached to your computer
by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
config CHR_DEV_SG
tristate "SCSI generic support"
depends on SCSI
- ---help---
+ help
If you want to use SCSI scanners, synthesizers or CD-writers or just
about anything having "SCSI" in its name other than hard disks,
CD-ROMs or tapes, say Y here. These won't be supported by the kernel
config CHR_DEV_SCH
tristate "SCSI media changer support"
depends on SCSI
- ---help---
+ help
This is a driver for SCSI media changers. Most common devices are
tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
don't need this for those tiny 6-slot cdrom changers. Media
config SCSI_LOGGING
bool "SCSI logging facility"
depends on SCSI
- ---help---
+ help
This turns on a logging facility that can be used to debug a number
of SCSI related problems.
depends on ISA && SCSI
select SCSI_SPI_ATTRS
select CHECK_SIGNATURE
- ---help---
+ help
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
must be manually specified in this case.
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
depends on ISA && SCSI && ISA_DMA_API
- ---help---
+ help
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that Trantor was
config SCSI_AHA1740
tristate "Adaptec AHA1740 support"
depends on EISA && SCSI
- ---help---
+ help
This is support for a SCSI host adapter. It is explained in section
3.5 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. If it doesn't work out
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on (PCI || ISA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
- ---help---
+ help
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and the files
tristate "LibFC module"
depends on SCSI_FC_ATTRS
select CRC32
- ---help---
+ help
Fibre Channel library module
config LIBFCOE
tristate "LibFCoE module"
depends on LIBFC
- ---help---
+ help
Library for Fibre Channel over Ethernet module
config FCOE
tristate "FCoE module"
depends on PCI
depends on LIBFCOE
- ---help---
+ help
Fibre Channel over Ethernet module
config FCOE_FNIC
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on PCI && SCSI
- ---help---
+ help
Formerly called GDT SCSI Disk Array Controller Support.
This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
depends on PCI && SCSI
depends on X86
select SCSI_SAS_LIBSAS
- ---help---
+ help
This driver supports the 6Gb/s SAS capabilities of the storage
control unit found in the Intel(R) C600 series chipset.
tristate "Generic NCR5380/53c400 SCSI ISA card support"
depends on ISA && SCSI && HAS_IOPORT_MAP
select SCSI_SPI_ATTRS
- ---help---
+ help
This is a driver for old ISA card SCSI controllers based on a
NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device.
Most boards such as the Trantor T130 fit this category, as do
config SCSI_IPS
tristate "IBM ServeRAID support"
depends on PCI && SCSI
- ---help---
+ help
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
depends on SCSI && PARPORT_PC
- ---help---
+ help
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
depends on SCSI && PARPORT_PC
- ---help---
+ help
This driver supports newer versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
config SCSI_IZIP_EPP16
bool "ppa/imm option - Use slow (but safe) EPP-16"
depends on SCSI_PPA || SCSI_IMM
- ---help---
+ help
EPP (Enhanced Parallel Port) is a standard for parallel ports which
allows them to act as expansion buses that can handle up to 64
peripheral devices.
config SCSI_STEX
tristate "Promise SuperTrak EX Series support"
depends on PCI && SCSI
- ---help---
+ help
This driver supports Promise SuperTrak EX series storage controllers.
Promise provides Linux RAID configuration utility for these
tristate "SYM53C8XX Version 2 SCSI support"
depends on PCI && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
This driver supports the whole NCR53C8XX/SYM53C8XX family of
PCI-SCSI controllers. It also supports the subset of LSI53C10XX
Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
int "DMA addressing mode"
depends on SCSI_SYM53C8XX_2
default "1"
- ---help---
+ help
This option only applies to PCI-SCSI chips that are PCI DAC
capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
select FW_LOADER
select IRQ_POLL
select SGL_ALLOC
- ---help---
+ help
This driver supports the IBM Power Linux family RAID adapters.
This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
as IBM iSeries 5702, 5703, 5709, and 570A.
int "default tagged command queue depth"
depends on SCSI_ZALON
default "8"
- ---help---
+ help
"Tagged command queuing" is a feature of SCSI-2 which improves
performance: the host adapter can send several SCSI commands to a
device's queue even if previous commands haven't finished yet.
int "maximum number of queued commands"
depends on SCSI_ZALON
default "32"
- ---help---
+ help
This option allows you to specify the maximum number of commands
that can be queued to any device, when tagged command queuing is
possible. The default value is 32. Minimum is 2, maximum is 64.
int "synchronous transfers frequency in MHz"
depends on SCSI_ZALON
default "20"
- ---help---
+ help
The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
are respectively the maximum data transfer rates in mega-transfers
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
depends on ISA && SCSI
- ---help---
+ help
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI! cards as well as any other card based on the FASXX chip
(including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
depends on NVME_TARGET_FC || NVME_TARGET_FC=n
depends on NVME_FC || NVME_FC=n
select CRC_T10DIF
- ---help---
+ help
This lpfc driver supports the Emulex LightPulse
Family of Fibre Channel PCI host adapters.
config SCSI_LPFC_DEBUG_FS
bool "Emulex LightPulse Fibre Channel debugfs Support"
depends on SCSI_LPFC && DEBUG_FS
- ---help---
+ help
This makes debugging information from the lpfc driver
available via the debugfs filesystem.
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on EISA && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
This driver is for NCR53c710 based SCSI host adapters.
It currently supports Compaq EISA cards.
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
depends on PCI && SCSI
- ---help---
+ help
This driver supports PCI SCSI host adapters based on the ASIC
TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
depends on PCI && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
PCscsi/PCnet (Am53/79C974) solutions.
tristate "Western Digital WD7193/7197/7296 support"
depends on PCI && SCSI
select EEPROM_93CX6
- ---help---
+ help
This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
SCSI controllers (based on WD33C296A chip).
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
depends on ZORRO && SCSI
- ---help---
+ help
If you have a Great Valley Products Series II SCSI controller,
answer Y. Also say Y if you have a later model of GVP SCSI
controller (such as the GVP A4008 or a Combo board). Otherwise,
tristate "Atari native SCSI support"
depends on ATARI && SCSI
select SCSI_SPI_ATTRS
- ---help---
+ help
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
a compatible SCSI controller (e.g. for Medusa).
tristate "PMC SIERRA Linux MaxRAID adapter support"
depends on PCI && SCSI && NET
select SGL_ALLOC
- ---help---
+ help
This driver supports the PMC SIERRA MaxRAID adapters.
config SCSI_PM8001
projects / linux-2.6-microblaze.git / blobdiff