rtc: s35390a: clarify INT2 pin output modes

[linux-2.6-microblaze.git] / drivers / rtc / rtc-s35390a.c

diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index 3c64dbb..fb795c4 100644 (file)
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -45,12 +45,13 @@
 /* flag for STATUS2 */
 #define S35390A_FLAG_TEST      0x01
 
-#define S35390A_INT2_MODE_MASK         0xF0
-
+/* INT2 pin output mode */
+#define S35390A_INT2_MODE_MASK         0x0E
 #define S35390A_INT2_MODE_NOINTR       0x00
-#define S35390A_INT2_MODE_FREQ         0x10
-#define S35390A_INT2_MODE_ALARM                0x40
-#define S35390A_INT2_MODE_PMIN_EDG     0x20
+#define S35390A_INT2_MODE_ALARM                BIT(1) /* INT2AE */
+#define S35390A_INT2_MODE_PMIN_EDG     BIT(2) /* INT2ME */
+#define S35390A_INT2_MODE_FREQ         BIT(3) /* INT2FE */
+#define S35390A_INT2_MODE_PMIN         (BIT(3) | BIT(2)) /* INT2FE | INT2ME */
 
 static const struct i2c_device_id s35390a_id[] = {
        { "s35390a", 0 },
@@ -303,9 +304,6 @@ static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
        else
                sts = S35390A_INT2_MODE_NOINTR;
 
-       /* This chip expects the bits of each byte to be in reverse order */
-       sts = bitrev8(sts);
-
        /* set interupt mode*/
        err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
        if (err < 0)
@@ -343,7 +341,7 @@ static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
        if (err < 0)
                return err;
 
-       if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
+       if ((sts & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
                /*
                 * When the alarm isn't enabled, the register to configure
                 * the alarm time isn't accessible.