rtc: bd70528: Support RTC on ROHM BD71815

[linux-2.6-microblaze.git] / drivers / rtc / rtc-bd70528.c

diff --git a/drivers/rtc/rtc-bd70528.c b/drivers/rtc/rtc-bd70528.c
index fb4476b..6454afc 100644 (file)
--- a/drivers/rtc/rtc-bd70528.c
+++ b/drivers/rtc/rtc-bd70528.c
@@ -6,6 +6,7 @@
 
 #include <linux/bcd.h>
 #include <linux/mfd/rohm-bd70528.h>
+#include <linux/mfd/rohm-bd71815.h>
 #include <linux/mfd/rohm-bd71828.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -13,6 +14,12 @@
 #include <linux/regmap.h>
 #include <linux/rtc.h>
 
+/*
+ * On BD71828 and BD71815 the ALM0 MASK is 14 bytes after the ALM0
+ * block start
+ */
+#define BD718XX_ALM_EN_OFFSET 14
+
 /*
  * We read regs RTC_SEC => RTC_YEAR
  * this struct is ordered according to chip registers.
@@ -55,6 +62,7 @@ struct bd70528_rtc {
        struct regmap *regmap;
        struct device *dev;
        u8 reg_time_start;
+       u8 bd718xx_alm_block_start;
        bool has_rtc_timers;
 };
 
@@ -236,8 +244,8 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
        struct bd71828_rtc_alm alm;
        struct bd70528_rtc *r = dev_get_drvdata(dev);
 
-       ret = regmap_bulk_read(r->regmap, BD71828_REG_RTC_ALM_START,
-                              &alm, sizeof(alm));
+       ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm,
+                              sizeof(alm));
        if (ret) {
                dev_err(dev, "Failed to read alarm regs\n");
                return ret;
@@ -250,8 +258,8 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
        else
                alm.alm_mask |= BD70528_MASK_ALM_EN;
 
-       ret = regmap_bulk_write(r->regmap, BD71828_REG_RTC_ALM_START,
-                               &alm, sizeof(alm));
+       ret = regmap_bulk_write(r->regmap, r->bd718xx_alm_block_start, &alm,
+                               sizeof(alm));
        if (ret)
                dev_err(dev, "Failed to set alarm time\n");
 
@@ -311,8 +319,8 @@ static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a)
        struct bd71828_rtc_alm alm;
        struct bd70528_rtc *r = dev_get_drvdata(dev);
 
-       ret = regmap_bulk_read(r->regmap, BD71828_REG_RTC_ALM_START,
-                              &alm, sizeof(alm));
+       ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm,
+                              sizeof(alm));
        if (ret) {
                dev_err(dev, "Failed to read alarm regs\n");
                return ret;
@@ -453,8 +461,9 @@ static int bd71828_alm_enable(struct device *dev, unsigned int enabled)
        if (!enabled)
                enableval = 0;
 
-       ret = regmap_update_bits(r->regmap, BD71828_REG_RTC_ALM0_MASK,
-                                BD70528_MASK_ALM_EN, enableval);
+       ret = regmap_update_bits(r->regmap, r->bd718xx_alm_block_start +
+                                BD718XX_ALM_EN_OFFSET, BD70528_MASK_ALM_EN,
+                                enableval);
        if (ret)
                dev_err(dev, "Failed to change alarm state\n");
 
@@ -524,9 +533,28 @@ static int bd70528_probe(struct platform_device *pdev)
                enable_main_irq = true;
                rtc_ops = &bd70528_rtc_ops;
                break;
+       case ROHM_CHIP_TYPE_BD71815:
+               irq_name = "bd71815-rtc-alm-0";
+               bd_rtc->reg_time_start = BD71815_REG_RTC_START;
+
+               /*
+                * See also BD718XX_ALM_EN_OFFSET:
+                * This works for BD71828 and BD71815 as they have same offset
+                * between ALM0 start and ALM0_MASK. If new ICs are to be
+                * added this requires proper check as ALM0_MASK is not located
+                * at the end of ALM0 block - but after all ALM blocks so if
+                * amount of ALMs differ the offset to enable/disable is likely
+                * to be incorrect and enable/disable must be given as own
+                * reg address here.
+                */
+               bd_rtc->bd718xx_alm_block_start = BD71815_REG_RTC_ALM_START;
+               hour_reg = BD71815_REG_HOUR;
+               rtc_ops = &bd71828_rtc_ops;
+               break;
        case ROHM_CHIP_TYPE_BD71828:
                irq_name = "bd71828-rtc-alm-0";
                bd_rtc->reg_time_start = BD71828_REG_RTC_START;
+               bd_rtc->bd718xx_alm_block_start = BD71828_REG_RTC_ALM_START;
                hour_reg = BD71828_REG_RTC_HOUR;
                rtc_ops = &bd71828_rtc_ops;
                break;
@@ -605,6 +633,7 @@ static int bd70528_probe(struct platform_device *pdev)
 static const struct platform_device_id bd718x7_rtc_id[] = {
        { "bd70528-rtc", ROHM_CHIP_TYPE_BD70528 },
        { "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 },
+       { "bd71815-rtc", ROHM_CHIP_TYPE_BD71815 },
        { },
 };
 MODULE_DEVICE_TABLE(platform, bd718x7_rtc_id);