This driver can also be built as a module. If so, the module
will be called bd9571mwv-regulator.
+config REGULATOR_BD957XMUF
+ tristate "ROHM BD9576MUF and BD9573MUF Regulators"
+ depends on MFD_ROHM_BD957XMUF
+ help
+ This driver supports voltage regulators on ROHM BD9576MUF and
+ BD9573MUF PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd9576-regulator.
+
config REGULATOR_CPCAP
tristate "Motorola CPCAP regulator"
depends on MFD_CPCAP
config REGULATOR_MAX77620
tristate "Maxim 77620/MAX20024 voltage regulator"
- depends on MFD_MAX77620
+ depends on MFD_MAX77620 || COMPILE_TEST
help
This driver controls Maxim MAX77620 voltage output regulator
via I2C bus. The provided regulator is suitable for Tegra
config REGULATOR_MAX77650
tristate "Maxim MAX77650/77651 regulator support"
- depends on MFD_MAX77650
+ depends on MFD_MAX77650 || COMPILE_TEST
help
Regulator driver for MAX77650/77651 PMIC from Maxim
Semiconductor. This device has a SIMO with three independent
config REGULATOR_MAX8907
tristate "Maxim 8907 voltage regulator"
- depends on MFD_MAX8907
+ depends on MFD_MAX8907 || COMPILE_TEST
help
This driver controls a Maxim 8907 voltage output regulator
via I2C bus. The provided regulator is suitable for Tegra
config REGULATOR_MAX77686
tristate "Maxim 77686 regulator"
- depends on MFD_MAX77686
+ depends on MFD_MAX77686 || COMPILE_TEST
help
This driver controls a Maxim 77686 regulator
via I2C bus. The provided regulator is suitable for
config REGULATOR_MAX77693
tristate "Maxim 77693/77843 regulator"
- depends on (MFD_MAX77693 || MFD_MAX77843)
+ depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
help
This driver controls a Maxim 77693/77843 regulators via I2C bus.
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
config REGULATOR_MAX77802
tristate "Maxim 77802 regulator"
- depends on MFD_MAX77686
+ depends on MFD_MAX77686 || COMPILE_TEST
help
This driver controls a Maxim 77802 regulator
via I2C bus. The provided regulator is suitable for
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6360
+ tristate "MT6360 SubPMIC Regulator"
+ depends on MFD_MT6360
+ help
+ Say Y here to enable MT6360 regulator support.
+ This is support MT6360 PMIC/LDO part include
+ 2-channel buck with Thermal Shutdown and Overload Protection
+ 6-channel High PSRR and Low Dropout LDO.
+
config REGULATOR_MT6380
tristate "MediaTek MT6380 PMIC"
depends on MTK_PMIC_WRAP
Say M here if you want to include support for enabling the VBUS output
as a module. The module will be named "qcom_usb_vbus_regulator".
+config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
+ tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports ATTINY regulator on the Raspberry Pi 7-inch
+ touchscreen unit. The regulator is used to enable power to the
+ TC358762, display and to control backlight.
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
config REGULATOR_ROHM
tristate
+config REGULATOR_RT4801
+ tristate "Richtek RT4801 Regulators"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
+ The device supports two regulators (DSVP/DSVN).
+
config REGULATOR_RT5033
tristate "Richtek RT5033 Regulators"
depends on MFD_RT5033
RT5033 PMIC. The device supports multiple regulators like
current source, LDO and Buck.
+config REGULATOR_RTMV20
+ tristate "RTMV20 Laser Diode Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver adds support for the load switch current regulator on
+ the Richtek RTMV20. It can support the load current up to 6A and
+ integrate strobe/vsync/fsin signal to synchronize the IR camera.
+
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver controls Samsung S2MPA01 voltage output regulator
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
output regulator via I2C bus. The chip is comprised of high efficient
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports a Samsung S5M8767A voltage output regulator
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and