#define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */
#define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */
-/* HW frame tag */
-#define SDPCM_FRAMETAG_LEN 4 /* 2 bytes len, 2 bytes check val */
-
-/* Total length of frame header for dongle protocol */
-#define SDPCM_HDRLEN (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN)
-#define SDPCM_RESERVE (SDPCM_HDRLEN + BRCMF_SDALIGN)
-
/*
* Software allocation of To SB Mailbox resources
*/
/* Current protocol version */
#define SDPCM_PROT_VERSION 4
-/* SW frame header */
-#define SDPCM_PACKET_SEQUENCE(p) (((u8 *)p)[0] & 0xff)
-
-#define SDPCM_CHANNEL_MASK 0x00000f00
-#define SDPCM_CHANNEL_SHIFT 8
-#define SDPCM_PACKET_CHANNEL(p) (((u8 *)p)[1] & 0x0f)
-
-#define SDPCM_NEXTLEN_OFFSET 2
-
-/* Data Offset from SOF (HW Tag, SW Tag, Pad) */
-#define SDPCM_DOFFSET_OFFSET 3 /* Data Offset */
-#define SDPCM_DOFFSET_VALUE(p) (((u8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff)
-#define SDPCM_DOFFSET_MASK 0xff000000
-#define SDPCM_DOFFSET_SHIFT 24
-#define SDPCM_FCMASK_OFFSET 4 /* Flow control */
-#define SDPCM_FCMASK_VALUE(p) (((u8 *)p)[SDPCM_FCMASK_OFFSET] & 0xff)
-#define SDPCM_WINDOW_OFFSET 5 /* Credit based fc */
-#define SDPCM_WINDOW_VALUE(p) (((u8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff)
-
-#define SDPCM_SWHEADER_LEN 8 /* SW header is 64 bits */
-
-/* logical channel numbers */
-#define SDPCM_CONTROL_CHANNEL 0 /* Control channel Id */
-#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication Channel Id */
-#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv Channel Id */
-#define SDPCM_GLOM_CHANNEL 3 /* For coalesced packets */
-#define SDPCM_TEST_CHANNEL 15 /* Reserved for test/debug packets */
-
-#define SDPCM_SEQUENCE_WRAP 256 /* wrap-around val for 8bit frame seq */
-
-#define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80)
-
/*
* Shared structure between dongle and the host.
* The structure contains pointers to trap or assert information.
__le32 brpt_addr;
};
-/* SDIO read frame info */
-struct brcmf_sdio_read {
+/* dongle SDIO bus specific header info */
+struct brcmf_sdio_hdrinfo {
u8 seq_num;
u8 channel;
u16 len;
u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN];
u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */
u8 rx_seq; /* Receive sequence number (expected) */
- struct brcmf_sdio_read cur_read;
+ struct brcmf_sdio_hdrinfo cur_read;
/* info of current read frame */
bool rxskip; /* Skip receive (awaiting NAK ACK) */
bool rxpending; /* Data frame pending in dongle */
struct brcmf_sdio_count sdcnt;
bool sr_enabled; /* SaveRestore enabled */
bool sleeping; /* SDIO bus sleeping */
+
+ u8 tx_hdrlen; /* sdio bus header length for tx packet */
};
/* clkstate */
#ifdef DEBUG
static int qcount[NUMPRIO];
-static int tx_packets[NUMPRIO];
#endif /* DEBUG */
#define DEFAULT_SDIO_DRIVE_STRENGTH 6 /* in milliamps */
}
}
-static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
- struct brcmf_sdio_read *rd,
- enum brcmf_sdio_frmtype type)
+/**
+ * brcmfmac sdio bus specific header
+ * This is the lowest layer header wrapped on the packets transmitted between
+ * host and WiFi dongle which contains information needed for SDIO core and
+ * firmware
+ *
+ * It consists of 2 parts: hw header and software header
+ * hardware header (frame tag) - 4 bytes
+ * Byte 0~1: Frame length
+ * Byte 2~3: Checksum, bit-wise inverse of frame length
+ * software header - 8 bytes
+ * Byte 0: Rx/Tx sequence number
+ * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag
+ * Byte 2: Length of next data frame, reserved for Tx
+ * Byte 3: Data offset
+ * Byte 4: Flow control bits, reserved for Tx
+ * Byte 5: Maximum Sequence number allowed by firmware for Tx, N/A for Tx packet
+ * Byte 6~7: Reserved
+ */
+#define SDPCM_HWHDR_LEN 4
+#define SDPCM_SWHDR_LEN 8
+#define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN)
+/* software header */
+#define SDPCM_SEQ_MASK 0x000000ff
+#define SDPCM_SEQ_WRAP 256
+#define SDPCM_CHANNEL_MASK 0x00000f00
+#define SDPCM_CHANNEL_SHIFT 8
+#define SDPCM_CONTROL_CHANNEL 0 /* Control */
+#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication */
+#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv */
+#define SDPCM_GLOM_CHANNEL 3 /* Coalesced packets */
+#define SDPCM_TEST_CHANNEL 15 /* Test/debug packets */
+#define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80)
+#define SDPCM_NEXTLEN_MASK 0x00ff0000
+#define SDPCM_NEXTLEN_SHIFT 16
+#define SDPCM_DOFFSET_MASK 0xff000000
+#define SDPCM_DOFFSET_SHIFT 24
+#define SDPCM_FCMASK_MASK 0x000000ff
+#define SDPCM_WINDOW_MASK 0x0000ff00
+#define SDPCM_WINDOW_SHIFT 8
+
+static inline u8 brcmf_sdio_getdatoffset(u8 *swheader)
+{
+ u32 hdrvalue;
+ hdrvalue = *(u32 *)swheader;
+ return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT);
+}
+
+static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,
+ struct brcmf_sdio_hdrinfo *rd,
+ enum brcmf_sdio_frmtype type)
{
u16 len, checksum;
u8 rx_seq, fc, tx_seq_max;
+ u32 swheader;
- /*
- * 4 bytes hardware header (frame tag)
- * Byte 0~1: Frame length
- * Byte 2~3: Checksum, bit-wise inverse of frame length
- */
+ /* hw header */
len = get_unaligned_le16(header);
checksum = get_unaligned_le16(header + sizeof(u16));
/* All zero means no more to read */
}
rd->len = len;
- /*
- * 8 bytes hardware header
- * Byte 0: Rx sequence number
- * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag
- * Byte 2: Length of next data frame
- * Byte 3: Data offset
- * Byte 4: Flow control bits
- * Byte 5: Maximum Sequence number allow for Tx
- * Byte 6~7: Reserved
- */
- if (type == BRCMF_SDIO_FT_SUPER &&
- SDPCM_GLOMDESC(&header[SDPCM_FRAMETAG_LEN])) {
+ /* software header */
+ header += SDPCM_HWHDR_LEN;
+ swheader = le32_to_cpu(*(__le32 *)header);
+ if (type == BRCMF_SDIO_FT_SUPER && SDPCM_GLOMDESC(header)) {
brcmf_err("Glom descriptor found in superframe head\n");
rd->len = 0;
return -EINVAL;
}
- rx_seq = SDPCM_PACKET_SEQUENCE(&header[SDPCM_FRAMETAG_LEN]);
- rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]);
+ rx_seq = (u8)(swheader & SDPCM_SEQ_MASK);
+ rd->channel = (swheader & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT;
if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL &&
type != BRCMF_SDIO_FT_SUPER) {
brcmf_err("HW header length too long\n");
rd->len = 0;
return -EINVAL;
}
- rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]);
+ rd->dat_offset = brcmf_sdio_getdatoffset(header);
if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
brcmf_err("seq %d: bad data offset\n", rx_seq);
bus->sdcnt.rx_badhdr++;
/* no need to check the reset for subframe */
if (type == BRCMF_SDIO_FT_SUB)
return 0;
- rd->len_nxtfrm = header[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
+ rd->len_nxtfrm = (swheader & SDPCM_NEXTLEN_MASK) >> SDPCM_NEXTLEN_SHIFT;
if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
/* only warm for NON glom packet */
if (rd->channel != SDPCM_GLOM_CHANNEL)
brcmf_err("seq %d: next length error\n", rx_seq);
rd->len_nxtfrm = 0;
}
- fc = SDPCM_FCMASK_VALUE(&header[SDPCM_FRAMETAG_LEN]);
+ swheader = le32_to_cpu(*(__le32 *)(header + 4));
+ fc = swheader & SDPCM_FCMASK_MASK;
if (bus->flowcontrol != fc) {
if (~bus->flowcontrol & fc)
bus->sdcnt.fc_xoff++;
bus->sdcnt.fc_rcvd++;
bus->flowcontrol = fc;
}
- tx_seq_max = SDPCM_WINDOW_VALUE(&header[SDPCM_FRAMETAG_LEN]);
+ tx_seq_max = (swheader & SDPCM_WINDOW_MASK) >> SDPCM_WINDOW_SHIFT;
if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) {
brcmf_err("seq %d: max tx seq number error\n", rx_seq);
tx_seq_max = bus->tx_seq + 2;
return 0;
}
+static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length)
+{
+ *(__le16 *)header = cpu_to_le16(frm_length);
+ *(((__le16 *)header) + 1) = cpu_to_le16(~frm_length);
+}
+
+static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header,
+ struct brcmf_sdio_hdrinfo *hd_info)
+{
+ u32 sw_header;
+
+ brcmf_sdio_update_hwhdr(header, hd_info->len);
+
+ sw_header = bus->tx_seq;
+ sw_header |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) &
+ SDPCM_CHANNEL_MASK;
+ sw_header |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) &
+ SDPCM_DOFFSET_MASK;
+ *(((__le32 *)header) + 1) = cpu_to_le32(sw_header);
+ *(((__le32 *)header) + 2) = 0;
+}
+
static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
{
u16 dlen, totlen;
u8 *dptr, num = 0;
-
+ u32 align = 0;
u16 sublen;
struct sk_buff *pfirst, *pnext;
int errcode;
u8 doff, sfdoff;
- struct brcmf_sdio_read rd_new;
+ struct brcmf_sdio_hdrinfo rd_new;
/* If packets, issue read(s) and send up packet chain */
/* Return sequence numbers consumed? */
brcmf_dbg(SDIO, "start: glomd %p glom %p\n",
bus->glomd, skb_peek(&bus->glom));
+ if (bus->sdiodev->pdata)
+ align = bus->sdiodev->pdata->sd_sgentry_align;
+ if (align < 4)
+ align = 4;
+
/* If there's a descriptor, generate the packet chain */
if (bus->glomd) {
pfirst = pnext = NULL;
pnext = NULL;
break;
}
- if (sublen % BRCMF_SDALIGN) {
+ if (sublen % align) {
brcmf_err("sublen %d not multiple of %d\n",
- sublen, BRCMF_SDALIGN);
+ sublen, align);
}
totlen += sublen;
}
/* Allocate/chain packet for next subframe */
- pnext = brcmu_pkt_buf_get_skb(sublen + BRCMF_SDALIGN);
+ pnext = brcmu_pkt_buf_get_skb(sublen + align);
if (pnext == NULL) {
brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n",
num, sublen);
skb_queue_tail(&bus->glom, pnext);
/* Adhere to start alignment requirements */
- pkt_align(pnext, sublen, BRCMF_SDALIGN);
+ pkt_align(pnext, sublen, align);
}
/* If all allocations succeeded, save packet chain
rd_new.seq_num = rxseq;
rd_new.len = dlen;
sdio_claim_host(bus->sdiodev->func[1]);
- errcode = brcmf_sdio_hdparser(bus, pfirst->data, &rd_new,
- BRCMF_SDIO_FT_SUPER);
+ errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new,
+ BRCMF_SDIO_FT_SUPER);
sdio_release_host(bus->sdiodev->func[1]);
bus->cur_read.len = rd_new.len_nxtfrm << 4;
rd_new.len = pnext->len;
rd_new.seq_num = rxseq++;
sdio_claim_host(bus->sdiodev->func[1]);
- errcode = brcmf_sdio_hdparser(bus, pnext->data, &rd_new,
- BRCMF_SDIO_FT_SUB);
+ errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new,
+ BRCMF_SDIO_FT_SUB);
sdio_release_host(bus->sdiodev->func[1]);
brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
pnext->data, 32, "subframe:\n");
skb_queue_walk_safe(&bus->glom, pfirst, pnext) {
dptr = (u8 *) (pfirst->data);
sublen = get_unaligned_le16(dptr);
- doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
+ doff = brcmf_sdio_getdatoffset(&dptr[SDPCM_HWHDR_LEN]);
brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
dptr, pfirst->len,
uint rxleft = 0; /* Remaining number of frames allowed */
int ret; /* Return code from calls */
uint rxcount = 0; /* Total frames read */
- struct brcmf_sdio_read *rd = &bus->cur_read, rd_new;
+ struct brcmf_sdio_hdrinfo *rd = &bus->cur_read, rd_new;
u8 head_read = 0;
brcmf_dbg(TRACE, "Enter\n");
bus->rxhdr, SDPCM_HDRLEN,
"RxHdr:\n");
- if (brcmf_sdio_hdparser(bus, bus->rxhdr, rd,
- BRCMF_SDIO_FT_NORMAL)) {
+ if (brcmf_sdio_hdparse(bus, bus->rxhdr, rd,
+ BRCMF_SDIO_FT_NORMAL)) {
sdio_release_host(bus->sdiodev->func[1]);
if (!bus->rxpending)
break;
memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
rd_new.seq_num = rd->seq_num;
sdio_claim_host(bus->sdiodev->func[1]);
- if (brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new,
- BRCMF_SDIO_FT_NORMAL)) {
+ if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new,
+ BRCMF_SDIO_FT_NORMAL)) {
rd->len = 0;
brcmu_pkt_buf_free_skb(pkt);
}
/* Save superframe descriptor and allocate packet frame */
if (rd->channel == SDPCM_GLOM_CHANNEL) {
- if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) {
+ if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_HWHDR_LEN])) {
brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
rd->len);
brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
return;
}
+/* flag marking a dummy skb added for DMA alignment requirement */
+#define DUMMY_SKB_FLAG 0x10000
+/* bit mask of data length chopped from the previous packet */
+#define DUMMY_SKB_CHOP_LEN_MASK 0xffff
+/**
+ * brcmf_sdio_txpkt_prep - packet preparation for transmit
+ * @bus: brcmf_sdio structure pointer
+ * @pktq: packet list pointer
+ * @chan: virtual channel to transmit the packet
+ *
+ * Processes to be applied to the packet
+ * - Align data buffer pointer
+ * - Align data buffer length
+ * - Prepare header
+ * Return: negative value if there is error
+ */
+static int
+brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
+ uint chan)
+{
+ u16 head_pad, tail_pad, tail_chop, head_align, sg_align;
+ int ntail;
+ struct sk_buff *pkt_next, *pkt_new;
+ u8 *dat_buf;
+ unsigned blksize = bus->sdiodev->func[SDIO_FUNC_2]->cur_blksize;
+ struct brcmf_sdio_hdrinfo hd_info = {0};
+
+ /* SDIO ADMA requires at least 32 bit alignment */
+ head_align = 4;
+ sg_align = 4;
+ if (bus->sdiodev->pdata) {
+ head_align = bus->sdiodev->pdata->sd_head_align > 4 ?
+ bus->sdiodev->pdata->sd_head_align : 4;
+ sg_align = bus->sdiodev->pdata->sd_sgentry_align > 4 ?
+ bus->sdiodev->pdata->sd_sgentry_align : 4;
+ }
+ /* sg entry alignment should be a divisor of block size */
+ WARN_ON(blksize % sg_align);
+
+ pkt_next = pktq->next;
+ dat_buf = (u8 *)(pkt_next->data);
+
+ /* Check head padding */
+ head_pad = ((unsigned long)dat_buf % head_align);
+ if (head_pad) {
+ if (skb_headroom(pkt_next) < head_pad) {
+ bus->sdiodev->bus_if->tx_realloc++;
+ head_pad = 0;
+ if (skb_cow(pkt_next, head_pad))
+ return -ENOMEM;
+ }
+ skb_push(pkt_next, head_pad);
+ dat_buf = (u8 *)(pkt_next->data);
+ memset(dat_buf, 0, head_pad + bus->tx_hdrlen);
+ }
+
+ /* Check tail padding */
+ pkt_new = NULL;
+ tail_chop = pkt_next->len % sg_align;
+ tail_pad = sg_align - tail_chop;
+ tail_pad += blksize - (pkt_next->len + tail_pad) % blksize;
+ if (skb_tailroom(pkt_next) < tail_pad && pkt_next->len > blksize) {
+ pkt_new = brcmu_pkt_buf_get_skb(tail_pad + tail_chop);
+ if (pkt_new == NULL)
+ return -ENOMEM;
+ memcpy(pkt_new->data,
+ pkt_next->data + pkt_next->len - tail_chop,
+ tail_chop);
+ *(u32 *)(pkt_new->cb) = DUMMY_SKB_FLAG + tail_chop;
+ skb_trim(pkt_next, pkt_next->len - tail_chop);
+ __skb_queue_after(pktq, pkt_next, pkt_new);
+ } else {
+ ntail = pkt_next->data_len + tail_pad -
+ (pkt_next->end - pkt_next->tail);
+ if (skb_cloned(pkt_next) || ntail > 0)
+ if (pskb_expand_head(pkt_next, 0, ntail, GFP_ATOMIC))
+ return -ENOMEM;
+ if (skb_linearize(pkt_next))
+ return -ENOMEM;
+ dat_buf = (u8 *)(pkt_next->data);
+ __skb_put(pkt_next, tail_pad);
+ }
+
+ /* Now prep the header */
+ if (pkt_new)
+ hd_info.len = pkt_next->len + tail_chop;
+ else
+ hd_info.len = pkt_next->len - tail_pad;
+ hd_info.channel = chan;
+ hd_info.dat_offset = head_pad + bus->tx_hdrlen;
+ brcmf_sdio_hdpack(bus, dat_buf, &hd_info);
+
+ if (BRCMF_BYTES_ON() &&
+ ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
+ (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)))
+ brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, "Tx Frame:\n");
+ else if (BRCMF_HDRS_ON())
+ brcmf_dbg_hex_dump(true, pkt_next, head_pad + bus->tx_hdrlen,
+ "Tx Header:\n");
+
+ return 0;
+}
+
+/**
+ * brcmf_sdio_txpkt_postp - packet post processing for transmit
+ * @bus: brcmf_sdio structure pointer
+ * @pktq: packet list pointer
+ *
+ * Processes to be applied to the packet
+ * - Remove head padding
+ * - Remove tail padding
+ */
+static void
+brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
+{
+ u8 *hdr;
+ u32 dat_offset;
+ u32 dummy_flags, chop_len;
+ struct sk_buff *pkt_next, *tmp, *pkt_prev;
+
+ skb_queue_walk_safe(pktq, pkt_next, tmp) {
+ dummy_flags = *(u32 *)(pkt_next->cb);
+ if (dummy_flags & DUMMY_SKB_FLAG) {
+ chop_len = dummy_flags & DUMMY_SKB_CHOP_LEN_MASK;
+ if (chop_len) {
+ pkt_prev = pkt_next->prev;
+ memcpy(pkt_prev->data + pkt_prev->len,
+ pkt_next->data, chop_len);
+ skb_put(pkt_prev, chop_len);
+ }
+ __skb_unlink(pkt_next, pktq);
+ brcmu_pkt_buf_free_skb(pkt_next);
+ } else {
+ hdr = pkt_next->data + SDPCM_HWHDR_LEN;
+ dat_offset = le32_to_cpu(*(__le32 *)hdr);
+ dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >>
+ SDPCM_DOFFSET_SHIFT;
+ skb_pull(pkt_next, dat_offset);
+ }
+ }
+}
+
/* Writes a HW/SW header into the packet and sends it. */
/* Assumes: (a) header space already there, (b) caller holds lock */
static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
uint chan)
{
int ret;
- u8 *frame;
- u16 len, pad = 0;
- u32 swheader;
int i;
+ struct sk_buff_head localq;
brcmf_dbg(TRACE, "Enter\n");
- frame = (u8 *) (pkt->data);
-
- /* Add alignment padding, allocate new packet if needed */
- pad = ((unsigned long)frame % BRCMF_SDALIGN);
- if (pad) {
- if (skb_headroom(pkt) < pad) {
- brcmf_dbg(INFO, "insufficient headroom %d for %d pad\n",
- skb_headroom(pkt), pad);
- bus->sdiodev->bus_if->tx_realloc++;
- ret = skb_cow(pkt, BRCMF_SDALIGN);
- if (ret)
- goto done;
- pad = ((unsigned long)frame % BRCMF_SDALIGN);
- }
- skb_push(pkt, pad);
- frame = (u8 *) (pkt->data);
- memset(frame, 0, pad + SDPCM_HDRLEN);
- }
- /* precondition: pad < BRCMF_SDALIGN */
-
- /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
- len = (u16) (pkt->len);
- *(__le16 *) frame = cpu_to_le16(len);
- *(((__le16 *) frame) + 1) = cpu_to_le16(~len);
-
- /* Software tag: channel, sequence number, data offset */
- swheader =
- ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) | bus->tx_seq |
- (((pad +
- SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK);
-
- *(((__le32 *) frame) + 1) = cpu_to_le32(swheader);
- *(((__le32 *) frame) + 2) = 0;
-
-#ifdef DEBUG
- tx_packets[pkt->priority]++;
-#endif
-
- brcmf_dbg_hex_dump(BRCMF_BYTES_ON() &&
- ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
- (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)),
- frame, len, "Tx Frame:\n");
- brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
- ((BRCMF_CTL_ON() &&
- chan == SDPCM_CONTROL_CHANNEL) ||
- (BRCMF_DATA_ON() &&
- chan != SDPCM_CONTROL_CHANNEL))) &&
- BRCMF_HDRS_ON(),
- frame, min_t(u16, len, 16), "TxHdr:\n");
-
- /* Raise len to next SDIO block to eliminate tail command */
- if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
- u16 pad = bus->blocksize - (len % bus->blocksize);
- if ((pad <= bus->roundup) && (pad < bus->blocksize))
- len += pad;
- } else if (len % BRCMF_SDALIGN) {
- len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
- }
-
- /* Some controllers have trouble with odd bytes -- round to even */
- if (len & (ALIGNMENT - 1))
- len = roundup(len, ALIGNMENT);
+ __skb_queue_head_init(&localq);
+ __skb_queue_tail(&localq, pkt);
+ ret = brcmf_sdio_txpkt_prep(bus, &localq, chan);
+ if (ret)
+ goto done;
sdio_claim_host(bus->sdiodev->func[1]);
ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC, pkt);
+ SDIO_FUNC_2, F2SYNC, &localq);
bus->sdcnt.f2txdata++;
if (ret < 0) {
}
sdio_release_host(bus->sdiodev->func[1]);
if (ret == 0)
- bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
+ bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
done:
- /* restore pkt buffer pointer before calling tx complete routine */
- skb_pull(pkt, SDPCM_HDRLEN + pad);
+ brcmf_sdio_txpkt_postp(bus, &localq);
+ __skb_dequeue_tail(&localq);
brcmf_txcomplete(bus->sdiodev->dev, pkt, ret == 0);
return ret;
}
u32 intstatus = 0;
int ret = 0, prec_out;
uint cnt = 0;
- uint datalen;
u8 tx_prec_map;
brcmf_dbg(TRACE, "Enter\n");
break;
}
spin_unlock_bh(&bus->txqlock);
- datalen = pkt->len - SDPCM_HDRLEN;
ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL);
}
} else {
- bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
+ bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
}
sdio_release_host(bus->sdiodev->func[1]);
bus->ctrl_frame_stat = false;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
+ ulong flags;
brcmf_dbg(TRACE, "Enter\n");
datalen = pkt->len;
/* Add space for the header */
- skb_push(pkt, SDPCM_HDRLEN);
+ skb_push(pkt, bus->tx_hdrlen);
/* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
prec = prio2prec((pkt->priority & PRIOMASK));
bus->sdcnt.fcqueued++;
/* Priority based enq */
- spin_lock_bh(&bus->txqlock);
+ spin_lock_irqsave(&bus->txqlock, flags);
if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
- skb_pull(pkt, SDPCM_HDRLEN);
- brcmf_txcomplete(bus->sdiodev->dev, pkt, false);
+ skb_pull(pkt, bus->tx_hdrlen);
brcmf_err("out of bus->txq !!!\n");
ret = -ENOSR;
} else {
bus->txoff = true;
brcmf_txflowblock(bus->sdiodev->dev, true);
}
- spin_unlock_bh(&bus->txqlock);
+ spin_unlock_irqrestore(&bus->txqlock, flags);
#ifdef DEBUG
if (pktq_plen(&bus->txq, prec) > qcount[prec])
return ret;
}
- bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
+ bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
return ret;
}
{
u8 *frame;
u16 len;
- u32 swheader;
uint retries = 0;
u8 doff = 0;
int ret = -1;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
+ struct brcmf_sdio_hdrinfo hd_info = {0};
brcmf_dbg(TRACE, "Enter\n");
/* Back the pointer to make a room for bus header */
- frame = msg - SDPCM_HDRLEN;
- len = (msglen += SDPCM_HDRLEN);
+ frame = msg - bus->tx_hdrlen;
+ len = (msglen += bus->tx_hdrlen);
/* Add alignment padding (optional for ctl frames) */
doff = ((unsigned long)frame % BRCMF_SDALIGN);
frame -= doff;
len += doff;
msglen += doff;
- memset(frame, 0, doff + SDPCM_HDRLEN);
+ memset(frame, 0, doff + bus->tx_hdrlen);
}
/* precondition: doff < BRCMF_SDALIGN */
- doff += SDPCM_HDRLEN;
+ doff += bus->tx_hdrlen;
/* Round send length to next SDIO block */
if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
brcmf_sdbrcm_bus_sleep(bus, false, false);
sdio_release_host(bus->sdiodev->func[1]);
- /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
- *(__le16 *) frame = cpu_to_le16((u16) msglen);
- *(((__le16 *) frame) + 1) = cpu_to_le16(~msglen);
-
- /* Software tag: channel, sequence number, data offset */
- swheader =
- ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) &
- SDPCM_CHANNEL_MASK)
- | bus->tx_seq | ((doff << SDPCM_DOFFSET_SHIFT) &
- SDPCM_DOFFSET_MASK);
- put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
- put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
+ hd_info.len = (u16)msglen;
+ hd_info.channel = SDPCM_CONTROL_CHANNEL;
+ hd_info.dat_offset = doff;
+ brcmf_sdio_hdpack(bus, frame, &hd_info);
if (!data_ok(bus)) {
brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
struct brcmf_sdio *bus;
struct brcmf_bus_dcmd *dlst;
u32 dngl_txglom;
- u32 dngl_txglomalign;
+ u32 txglomalign = 0;
u8 idx;
brcmf_dbg(TRACE, "Enter\n");
bus->txbound = BRCMF_TXBOUND;
bus->rxbound = BRCMF_RXBOUND;
bus->txminmax = BRCMF_TXMINMAX;
- bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1;
+ bus->tx_seq = SDPCM_SEQ_WRAP - 1;
INIT_WORK(&bus->datawork, brcmf_sdio_dataworker);
bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq");
bus->sdiodev->bus_if->chip = bus->ci->chip;
bus->sdiodev->bus_if->chiprev = bus->ci->chiprev;
- /* Attach to the brcmf/OS/network interface */
- ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev);
+ /* default sdio bus header length for tx packet */
+ bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
+
+ /* Attach to the common layer, reserve hdr space */
+ ret = brcmf_attach(bus->tx_hdrlen, bus->sdiodev->dev);
if (ret != 0) {
brcmf_err("brcmf_attach failed\n");
goto fail;
dlst->param_len = sizeof(u32);
} else {
/* otherwise, set txglomalign */
- dngl_txglomalign = bus->sdiodev->bus_if->align;
+ if (sdiodev->pdata)
+ txglomalign = sdiodev->pdata->sd_sgentry_align;
+ /* SDIO ADMA requires at least 32 bit alignment */
+ if (txglomalign < 4)
+ txglomalign = 4;
dlst->name = "bus:txglomalign";
- dlst->param = (char *)&dngl_txglomalign;
+ dlst->param = (char *)&txglomalign;
dlst->param_len = sizeof(u32);
}
list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list);
projects / linux-2.6-microblaze.git / blobdiff