*/
static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
- int status, count;
+ int status;
+ unsigned long count;
- mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
/* Wait for the command to complete. We loop
* here because some AEN might arrive while
* we're waiting for the mailbox command to
- * complete. If more than 5 arrive then we can
+ * complete. If more than 5 seconds expire we can
* assume something is wrong. */
- count = 5;
+ count = jiffies + HZ * MAILBOX_TIMEOUT;
do {
/* Wait for the interrupt to come in. */
status = ql_wait_mbx_cmd_cmplt(qdev);
if (status)
- goto end;
+ continue;
/* Process the event. If it's an AEN, it
* will be handled in-line or a worker
MB_CMD_STS_GOOD) ||
((mbcp->mbox_out[0] & 0x0000f000) ==
MB_CMD_STS_INTRMDT))
- break;
- } while (--count);
+ goto done;
+ } while (time_before(jiffies, count));
- if (!count) {
- QPRINTK(qdev, DRV, ERR,
- "Timed out waiting for mailbox complete.\n");
- status = -ETIMEDOUT;
- goto end;
- }
+ QPRINTK(qdev, DRV, ERR,
+ "Timed out waiting for mailbox complete.\n");
+ status = -ETIMEDOUT;
+ goto end;
+
+done:
/* Now we can clear the interrupt condition
* and look at our status.
status = -EIO;
}
end:
- mutex_unlock(&qdev->mpi_mutex);
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
return status;
return status;
}
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 2;
+
+ mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL;
+ mbcp->mbox_in[1] = control;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Command not supported by firmware.\n");
+ status = -EINVAL;
+ } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+ /* This indicates that the firmware is
+ * already in the state we are trying to
+ * change it to.
+ */
+ QPRINTK(qdev, DRV, ERR,
+ "Command parameters make no change.\n");
+ }
+ return status;
+}
+
+/* Returns a negative error code or the mailbox command status. */
+static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+ *control = 0;
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 1;
+
+ mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) {
+ *control = mbcp->mbox_in[1];
+ return status;
+ }
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Command not supported by firmware.\n");
+ status = -EINVAL;
+ } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed to get MPI traffic control.\n");
+ status = -EIO;
+ }
+ return status;
+}
+
+int ql_wait_fifo_empty(struct ql_adapter *qdev)
+{
+ int count = 5;
+ u32 mgmnt_fifo_empty;
+ u32 nic_fifo_empty;
+
+ do {
+ nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE;
+ ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty);
+ mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY;
+ if (nic_fifo_empty && mgmnt_fifo_empty)
+ return 0;
+ msleep(100);
+ } while (count-- > 0);
+ return -ETIMEDOUT;
+}
+
/* API called in work thread context to set new TX/RX
* maximum frame size values to match MTU.
*/
static int ql_set_port_cfg(struct ql_adapter *qdev)
{
int status;
+ rtnl_lock();
status = ql_mb_set_port_cfg(qdev);
+ rtnl_unlock();
if (status)
return status;
status = ql_idc_wait(qdev);
container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
int status;
+ rtnl_lock();
status = ql_mb_get_port_cfg(qdev);
+ rtnl_unlock();
if (status) {
QPRINTK(qdev, DRV, ERR,
"Bug: Failed to get port config data.\n");
* needs to be set.
* */
set_bit(QL_CAM_RT_SET, &qdev->flags);
+ rtnl_lock();
status = ql_mb_idc_ack(qdev);
+ rtnl_unlock();
if (status) {
QPRINTK(qdev, DRV, ERR,
"Bug: No pending IDC!\n");
struct mbox_params *mbcp = &mbc;
int err = 0;
- mutex_lock(&qdev->mpi_mutex);
+ rtnl_lock();
+ /* Begin polled mode for MPI */
+ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
while (ql_read32(qdev, STS) & STS_PI) {
memset(mbcp, 0, sizeof(struct mbox_params));
break;
}
- mutex_unlock(&qdev->mpi_mutex);
+ /* End polled mode for MPI */
+ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+ rtnl_unlock();
ql_enable_completion_interrupt(qdev, 0);
}
projects / linux-2.6-microblaze.git / blobdiff