}
EXPORT_SYMBOL(phy_device_create);
+/* phy_c45_probe_present - checks to see if a MMD is present in the package
+ * @bus: the target MII bus
+ * @prtad: PHY package address on the MII bus
+ * @devad: PHY device (MMD) address
+ *
+ * Read the MDIO_STAT2 register, and check whether a device is responding
+ * at this address.
+ *
+ * Returns: negative error number on bus access error, zero if no device
+ * is responding, or positive if a device is present.
+ */
+static int phy_c45_probe_present(struct mii_bus *bus, int prtad, int devad)
+{
+ int stat2;
+
+ stat2 = mdiobus_c45_read(bus, prtad, devad, MDIO_STAT2);
+ if (stat2 < 0)
+ return stat2;
+
+ return (stat2 & MDIO_STAT2_DEVPRST) == MDIO_STAT2_DEVPRST_VAL;
+}
+
/* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers.
* @bus: the target MII bus
* @addr: PHY address on the MII bus
return -EIO;
*devices_in_package |= phy_reg;
- /* Bit 0 doesn't represent a device, it indicates c22 regs presence */
- *devices_in_package &= ~BIT(0);
-
return 0;
}
* get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
* @bus: the target MII bus
* @addr: PHY address on the MII bus
- * @phy_id: where to store the ID retrieved.
* @c45_ids: where to store the c45 ID information.
*
- * If the PHY devices-in-package appears to be valid, it and the
- * corresponding identifiers are stored in @c45_ids, zero is stored
- * in @phy_id. Otherwise 0xffffffff is stored in @phy_id. Returns
- * zero on success.
+ * Read the PHY "devices in package". If this appears to be valid, read
+ * the PHY identifiers for each device. Return the "devices in package"
+ * and identifiers in @c45_ids.
*
+ * Returns zero on success, %-EIO on bus access error, or %-ENODEV if
+ * the "devices in package" is invalid.
*/
-static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
+static int get_phy_c45_ids(struct mii_bus *bus, int addr,
struct phy_c45_device_ids *c45_ids)
{
const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
- u32 *devs = &c45_ids->devices_in_package;
- int i, phy_reg;
+ u32 devs_in_pkg = 0;
+ int i, ret, phy_reg;
/* Find first non-zero Devices In package. Device zero is reserved
* for 802.3 c45 complied PHYs, so don't probe it at first.
*/
- for (i = 1; i < num_ids && *devs == 0; i++) {
- phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
- if (phy_reg < 0)
- return -EIO;
-
- if ((*devs & 0x1fffffff) == 0x1fffffff) {
- /* If mostly Fs, there is no device there,
- * then let's continue to probe more, as some
- * 10G PHYs have zero Devices In package,
- * e.g. Cortina CS4315/CS4340 PHY.
+ for (i = 1; i < MDIO_MMD_NUM && devs_in_pkg == 0; i++) {
+ if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) {
+ /* Check that there is a device present at this
+ * address before reading the devices-in-package
+ * register to avoid reading garbage from the PHY.
+ * Some PHYs (88x3310) vendor space is not IEEE802.3
+ * compliant.
*/
- phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
- if (phy_reg < 0)
+ ret = phy_c45_probe_present(bus, addr, i);
+ if (ret < 0)
return -EIO;
- /* no device there, let's get out of here */
- if ((*devs & 0x1fffffff) == 0x1fffffff) {
- *phy_id = 0xffffffff;
- return 0;
- } else {
- break;
- }
+
+ if (!ret)
+ continue;
}
+ phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, &devs_in_pkg);
+ if (phy_reg < 0)
+ return -EIO;
+ }
+
+ if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) {
+ /* If mostly Fs, there is no device there, then let's probe
+ * MMD 0, as some 10G PHYs have zero Devices In package,
+ * e.g. Cortina CS4315/CS4340 PHY.
+ */
+ phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, &devs_in_pkg);
+ if (phy_reg < 0)
+ return -EIO;
+
+ /* no device there, let's get out of here */
+ if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff)
+ return -ENODEV;
}
/* Now probe Device Identifiers for each device present. */
for (i = 1; i < num_ids; i++) {
- if (!(c45_ids->devices_in_package & (1 << i)))
+ if (!(devs_in_pkg & (1 << i)))
continue;
phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1);
return -EIO;
c45_ids->device_ids[i] |= phy_reg;
}
- *phy_id = 0;
+
+ c45_ids->devices_in_package = devs_in_pkg;
+ /* Bit 0 doesn't represent a device, it indicates c22 regs presence */
+ c45_ids->mmds_present = devs_in_pkg & ~BIT(0);
+
return 0;
}
/**
- * get_phy_id - reads the specified addr for its ID.
+ * get_phy_c22_id - reads the specified addr for its clause 22 ID.
* @bus: the target MII bus
* @addr: PHY address on the MII bus
* @phy_id: where to store the ID retrieved.
- * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
- * @c45_ids: where to store the c45 ID information.
- *
- * Description: In the case of a 802.3-c22 PHY, reads the ID registers
- * of the PHY at @addr on the @bus, stores it in @phy_id and returns
- * zero on success.
- *
- * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and
- * its return value is in turn returned.
*
+ * Read the 802.3 clause 22 PHY ID from the PHY at @addr on the @bus,
+ * placing it in @phy_id. Return zero on successful read and the ID is
+ * valid, %-EIO on bus access error, or %-ENODEV if no device responds
+ * or invalid ID.
*/
-static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
- bool is_c45, struct phy_c45_device_ids *c45_ids)
+static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
{
int phy_reg;
- if (is_c45)
- return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
-
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
if (phy_reg < 0) {
*phy_id |= phy_reg;
+ /* If the phy_id is mostly Fs, there is no device there */
+ if ((*phy_id & 0x1fffffff) == 0x1fffffff)
+ return -ENODEV;
+
return 0;
}
* @addr: PHY address on the MII bus
* @is_c45: If true the PHY uses the 802.3 clause 45 protocol
*
- * Description: Reads the ID registers of the PHY at @addr on the
- * @bus, then allocates and returns the phy_device to represent it.
+ * Probe for a PHY at @addr on @bus.
+ *
+ * When probing for a clause 22 PHY, then read the ID registers. If we find
+ * a valid ID, allocate and return a &struct phy_device.
+ *
+ * When probing for a clause 45 PHY, read the "devices in package" registers.
+ * If the "devices in package" appears valid, read the ID registers for each
+ * MMD, allocate and return a &struct phy_device.
+ *
+ * Returns an allocated &struct phy_device on success, %-ENODEV if there is
+ * no PHY present, or %-EIO on bus access error.
*/
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
{
int r;
c45_ids.devices_in_package = 0;
+ c45_ids.mmds_present = 0;
memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
- r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
+ if (is_c45)
+ r = get_phy_c45_ids(bus, addr, &c45_ids);
+ else
+ r = get_phy_c22_id(bus, addr, &phy_id);
+
if (r)
return ERR_PTR(r);
- /* If the phy_id is mostly Fs, there is no device there */
- if ((phy_id & 0x1fffffff) == 0x1fffffff)
- return ERR_PTR(-ENODEV);
-
return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
}
EXPORT_SYMBOL(get_phy_device);
projects / linux-2.6-microblaze.git / blobdiff