#include <linux/seq_file.h>
#endif /* CONFIG_DEBUG_FS */
#include <linux/net_tstamp.h>
+#include <linux/phylink.h>
#include <net/pkt_cls.h>
#include "stmmac_ptp.h"
#include "stmmac.h"
return dirty;
}
-/**
- * stmmac_hw_fix_mac_speed - callback for speed selection
- * @priv: driver private structure
- * Description: on some platforms (e.g. ST), some HW system configuration
- * registers have to be set according to the link speed negotiated.
- */
-static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
-{
- struct net_device *ndev = priv->dev;
- struct phy_device *phydev = ndev->phydev;
-
- if (likely(priv->plat->fix_mac_speed))
- priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
-}
-
/**
* stmmac_enable_eee_mode - check and enter in LPI mode
* @priv: driver private structure
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
- struct net_device *ndev = priv->dev;
- int interface = priv->plat->interface;
- bool ret = false;
-
- if ((interface != PHY_INTERFACE_MODE_MII) &&
- (interface != PHY_INTERFACE_MODE_GMII) &&
- !phy_interface_mode_is_rgmii(interface))
- goto out;
+ int tx_lpi_timer = priv->tx_lpi_timer;
/* Using PCS we cannot dial with the phy registers at this stage
* so we do not support extra feature like EEE.
if ((priv->hw->pcs == STMMAC_PCS_RGMII) ||
(priv->hw->pcs == STMMAC_PCS_TBI) ||
(priv->hw->pcs == STMMAC_PCS_RTBI))
- goto out;
-
- /* MAC core supports the EEE feature. */
- if (priv->dma_cap.eee) {
- int tx_lpi_timer = priv->tx_lpi_timer;
-
- /* Check if the PHY supports EEE */
- if (phy_init_eee(ndev->phydev, 1)) {
- /* To manage at run-time if the EEE cannot be supported
- * anymore (for example because the lp caps have been
- * changed).
- * In that case the driver disable own timers.
- */
- mutex_lock(&priv->lock);
- if (priv->eee_active) {
- netdev_dbg(priv->dev, "disable EEE\n");
- del_timer_sync(&priv->eee_ctrl_timer);
- stmmac_set_eee_timer(priv, priv->hw, 0,
- tx_lpi_timer);
- }
- priv->eee_active = 0;
- mutex_unlock(&priv->lock);
- goto out;
- }
- /* Activate the EEE and start timers */
- mutex_lock(&priv->lock);
- if (!priv->eee_active) {
- priv->eee_active = 1;
- timer_setup(&priv->eee_ctrl_timer,
- stmmac_eee_ctrl_timer, 0);
- mod_timer(&priv->eee_ctrl_timer,
- STMMAC_LPI_T(eee_timer));
-
- stmmac_set_eee_timer(priv, priv->hw,
- STMMAC_DEFAULT_LIT_LS, tx_lpi_timer);
- }
- /* Set HW EEE according to the speed */
- stmmac_set_eee_pls(priv, priv->hw, ndev->phydev->link);
+ return false;
- ret = true;
+ /* Check if MAC core supports the EEE feature. */
+ if (!priv->dma_cap.eee)
+ return false;
+
+ mutex_lock(&priv->lock);
+
+ /* Check if it needs to be deactivated */
+ if (!priv->eee_active) {
+ if (priv->eee_enabled) {
+ netdev_dbg(priv->dev, "disable EEE\n");
+ del_timer_sync(&priv->eee_ctrl_timer);
+ stmmac_set_eee_timer(priv, priv->hw, 0, tx_lpi_timer);
+ }
mutex_unlock(&priv->lock);
+ return false;
+ }
- netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
+ if (priv->eee_active && !priv->eee_enabled) {
+ timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer));
+ stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
+ tx_lpi_timer);
}
-out:
- return ret;
+
+ mutex_unlock(&priv->lock);
+ netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
+ return true;
}
/* stmmac_get_tx_hwtstamp - get HW TX timestamps
priv->pause, tx_cnt);
}
-/**
- * stmmac_adjust_link - adjusts the link parameters
- * @dev: net device structure
- * Description: this is the helper called by the physical abstraction layer
- * drivers to communicate the phy link status. According the speed and duplex
- * this driver can invoke registered glue-logic as well.
- * It also invoke the eee initialization because it could happen when switch
- * on different networks (that are eee capable).
- */
-static void stmmac_adjust_link(struct net_device *dev)
+static void stmmac_validate(struct phylink_config *config,
+ unsigned long *supported,
+ struct phylink_link_state *state)
{
- struct stmmac_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
- bool new_state = false;
-
- if (!phydev)
- return;
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, };
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+ int tx_cnt = priv->plat->tx_queues_to_use;
+ int max_speed = priv->plat->max_speed;
- mutex_lock(&priv->lock);
+ phylink_set(mac_supported, 10baseT_Half);
+ phylink_set(mac_supported, 10baseT_Full);
+ phylink_set(mac_supported, 100baseT_Half);
+ phylink_set(mac_supported, 100baseT_Full);
+
+ phylink_set(mac_supported, Autoneg);
+ phylink_set(mac_supported, Pause);
+ phylink_set(mac_supported, Asym_Pause);
+ phylink_set_port_modes(mac_supported);
+
+ if (priv->plat->has_gmac ||
+ priv->plat->has_gmac4 ||
+ priv->plat->has_xgmac) {
+ phylink_set(mac_supported, 1000baseT_Half);
+ phylink_set(mac_supported, 1000baseT_Full);
+ phylink_set(mac_supported, 1000baseKX_Full);
+ }
+
+ /* Cut down 1G if asked to */
+ if ((max_speed > 0) && (max_speed < 1000)) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseX_Full);
+ } else if (priv->plat->has_xgmac) {
+ phylink_set(mac_supported, 2500baseT_Full);
+ phylink_set(mac_supported, 5000baseT_Full);
+ phylink_set(mac_supported, 10000baseSR_Full);
+ phylink_set(mac_supported, 10000baseLR_Full);
+ phylink_set(mac_supported, 10000baseER_Full);
+ phylink_set(mac_supported, 10000baseLRM_Full);
+ phylink_set(mac_supported, 10000baseT_Full);
+ phylink_set(mac_supported, 10000baseKX4_Full);
+ phylink_set(mac_supported, 10000baseKR_Full);
+ }
+
+ /* Half-Duplex can only work with single queue */
+ if (tx_cnt > 1) {
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 1000baseT_Half);
+ }
+
+ bitmap_and(supported, supported, mac_supported,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_andnot(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mac_supported,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_andnot(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
- if (phydev->link) {
- u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
+static int stmmac_mac_link_state(struct phylink_config *config,
+ struct phylink_link_state *state)
+{
+ return -EOPNOTSUPP;
+}
- /* Now we make sure that we can be in full duplex mode.
- * If not, we operate in half-duplex mode. */
- if (phydev->duplex != priv->oldduplex) {
- new_state = true;
- if (!phydev->duplex)
- ctrl &= ~priv->hw->link.duplex;
- else
- ctrl |= priv->hw->link.duplex;
- priv->oldduplex = phydev->duplex;
- }
- /* Flow Control operation */
- if (phydev->pause)
- stmmac_mac_flow_ctrl(priv, phydev->duplex);
-
- if (phydev->speed != priv->speed) {
- new_state = true;
- ctrl &= ~priv->hw->link.speed_mask;
- switch (phydev->speed) {
- case SPEED_1000:
- ctrl |= priv->hw->link.speed1000;
- break;
- case SPEED_100:
- ctrl |= priv->hw->link.speed100;
- break;
- case SPEED_10:
- ctrl |= priv->hw->link.speed10;
- break;
- default:
- netif_warn(priv, link, priv->dev,
- "broken speed: %d\n", phydev->speed);
- phydev->speed = SPEED_UNKNOWN;
- break;
- }
- if (phydev->speed != SPEED_UNKNOWN)
- stmmac_hw_fix_mac_speed(priv);
- priv->speed = phydev->speed;
- }
+static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+ u32 ctrl;
- writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
+ ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
+ ctrl &= ~priv->hw->link.speed_mask;
- if (!priv->oldlink) {
- new_state = true;
- priv->oldlink = true;
+ if (state->interface == PHY_INTERFACE_MODE_USXGMII) {
+ switch (state->speed) {
+ case SPEED_10000:
+ ctrl |= priv->hw->link.xgmii.speed10000;
+ break;
+ case SPEED_5000:
+ ctrl |= priv->hw->link.xgmii.speed5000;
+ break;
+ case SPEED_2500:
+ ctrl |= priv->hw->link.xgmii.speed2500;
+ break;
+ default:
+ return;
+ }
+ } else {
+ switch (state->speed) {
+ case SPEED_2500:
+ ctrl |= priv->hw->link.speed2500;
+ break;
+ case SPEED_1000:
+ ctrl |= priv->hw->link.speed1000;
+ break;
+ case SPEED_100:
+ ctrl |= priv->hw->link.speed100;
+ break;
+ case SPEED_10:
+ ctrl |= priv->hw->link.speed10;
+ break;
+ default:
+ return;
}
- } else if (priv->oldlink) {
- new_state = true;
- priv->oldlink = false;
- priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
}
- if (new_state && netif_msg_link(priv))
- phy_print_status(phydev);
+ priv->speed = state->speed;
- mutex_unlock(&priv->lock);
+ if (priv->plat->fix_mac_speed)
+ priv->plat->fix_mac_speed(priv->plat->bsp_priv, state->speed);
- if (phydev->is_pseudo_fixed_link)
- /* Stop PHY layer to call the hook to adjust the link in case
- * of a switch is attached to the stmmac driver.
- */
- phydev->irq = PHY_IGNORE_INTERRUPT;
+ if (!state->duplex)
+ ctrl &= ~priv->hw->link.duplex;
else
- /* At this stage, init the EEE if supported.
- * Never called in case of fixed_link.
- */
+ ctrl |= priv->hw->link.duplex;
+
+ /* Flow Control operation */
+ if (state->pause)
+ stmmac_mac_flow_ctrl(priv, state->duplex);
+
+ writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
+}
+
+static void stmmac_mac_an_restart(struct phylink_config *config)
+{
+ /* Not Supported */
+}
+
+static void stmmac_mac_link_down(struct phylink_config *config,
+ unsigned int mode, phy_interface_t interface)
+{
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+ stmmac_mac_set(priv, priv->ioaddr, false);
+ priv->eee_active = false;
+ stmmac_eee_init(priv);
+ stmmac_set_eee_pls(priv, priv->hw, false);
+}
+
+static void stmmac_mac_link_up(struct phylink_config *config,
+ unsigned int mode, phy_interface_t interface,
+ struct phy_device *phy)
+{
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+ stmmac_mac_set(priv, priv->ioaddr, true);
+ if (phy && priv->dma_cap.eee) {
+ priv->eee_active = phy_init_eee(phy, 1) >= 0;
priv->eee_enabled = stmmac_eee_init(priv);
+ stmmac_set_eee_pls(priv, priv->hw, true);
+ }
}
+static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
+ .validate = stmmac_validate,
+ .mac_link_state = stmmac_mac_link_state,
+ .mac_config = stmmac_mac_config,
+ .mac_an_restart = stmmac_mac_an_restart,
+ .mac_link_down = stmmac_mac_link_down,
+ .mac_link_up = stmmac_mac_link_up,
+};
+
/**
* stmmac_check_pcs_mode - verify if RGMII/SGMII is supported
* @priv: driver private structure
static int stmmac_init_phy(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
- u32 tx_cnt = priv->plat->tx_queues_to_use;
- struct phy_device *phydev;
- char phy_id_fmt[MII_BUS_ID_SIZE + 3];
- char bus_id[MII_BUS_ID_SIZE];
- int interface = priv->plat->interface;
- int max_speed = priv->plat->max_speed;
- priv->oldlink = false;
- priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
+ struct device_node *node;
+ int ret;
- if (priv->plat->phy_node) {
- phydev = of_phy_connect(dev, priv->plat->phy_node,
- &stmmac_adjust_link, 0, interface);
- } else {
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
+ node = priv->plat->phylink_node;
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- priv->plat->phy_addr);
- netdev_dbg(priv->dev, "%s: trying to attach to %s\n", __func__,
- phy_id_fmt);
+ if (node)
+ ret = phylink_of_phy_connect(priv->phylink, node, 0);
- phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
- interface);
- }
+ /* Some DT bindings do not set-up the PHY handle. Let's try to
+ * manually parse it
+ */
+ if (!node || ret) {
+ int addr = priv->plat->phy_addr;
+ struct phy_device *phydev;
- if (IS_ERR_OR_NULL(phydev)) {
- netdev_err(priv->dev, "Could not attach to PHY\n");
- if (!phydev)
+ phydev = mdiobus_get_phy(priv->mii, addr);
+ if (!phydev) {
+ netdev_err(priv->dev, "no phy at addr %d\n", addr);
return -ENODEV;
+ }
- return PTR_ERR(phydev);
+ ret = phylink_connect_phy(priv->phylink, phydev);
}
- /* Stop Advertising 1000BASE Capability if interface is not GMII */
- if ((interface == PHY_INTERFACE_MODE_MII) ||
- (interface == PHY_INTERFACE_MODE_RMII) ||
- (max_speed < 1000 && max_speed > 0))
- phy_set_max_speed(phydev, SPEED_100);
+ return ret;
+}
- /*
- * Half-duplex mode not supported with multiqueue
- * half-duplex can only works with single queue
- */
- if (tx_cnt > 1) {
- phy_remove_link_mode(phydev,
- ETHTOOL_LINK_MODE_10baseT_Half_BIT);
- phy_remove_link_mode(phydev,
- ETHTOOL_LINK_MODE_100baseT_Half_BIT);
- phy_remove_link_mode(phydev,
- ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
- }
+static int stmmac_phy_setup(struct stmmac_priv *priv)
+{
+ struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
+ int mode = priv->plat->interface;
+ struct phylink *phylink;
- /*
- * Broken HW is sometimes missing the pull-up resistor on the
- * MDIO line, which results in reads to non-existent devices returning
- * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
- * device as well.
- * Note: phydev->phy_id is the result of reading the UID PHY registers.
- */
- if (!priv->plat->phy_node && phydev->phy_id == 0) {
- phy_disconnect(phydev);
- return -ENODEV;
- }
+ priv->phylink_config.dev = &priv->dev->dev;
+ priv->phylink_config.type = PHYLINK_NETDEV;
- /* stmmac_adjust_link will change this to PHY_IGNORE_INTERRUPT to avoid
- * subsequent PHY polling, make sure we force a link transition if
- * we have a UP/DOWN/UP transition
- */
- if (phydev->is_pseudo_fixed_link)
- phydev->irq = PHY_POLL;
+ phylink = phylink_create(&priv->phylink_config, fwnode,
+ mode, &stmmac_phylink_mac_ops);
+ if (IS_ERR(phylink))
+ return PTR_ERR(phylink);
- phy_attached_info(phydev);
+ priv->phylink = phylink;
return 0;
}
&priv->xstats, chan);
struct stmmac_channel *ch = &priv->channel[chan];
+ if (status)
+ status |= handle_rx | handle_tx;
+
if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
napi_schedule_irqoff(&ch->rx_napi);
}
- if ((status & handle_tx) && (chan < priv->plat->tx_queues_to_use)) {
- stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
+ if ((status & handle_tx) && (chan < priv->plat->tx_queues_to_use))
napi_schedule_irqoff(&ch->tx_napi);
- }
return status;
}
unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET |
MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET;
- dwmac_mmc_intr_all_mask(priv->mmcaddr);
+ stmmac_mmc_intr_all_mask(priv, priv->mmcaddr);
if (priv->dma_cap.rmon) {
- dwmac_mmc_ctrl(priv->mmcaddr, mode);
+ stmmac_mmc_ctrl(priv, priv->mmcaddr, mode);
memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
} else
netdev_info(priv->dev, "No MAC Management Counters available\n");
stmmac_get_umac_addr(priv, priv->hw, priv->dev->dev_addr, 0);
if (!is_valid_ether_addr(priv->dev->dev_addr))
eth_hw_addr_random(priv->dev);
- netdev_info(priv->dev, "device MAC address %pM\n",
- priv->dev->dev_addr);
+ dev_info(priv->device, "device MAC address %pM\n",
+ priv->dev->dev_addr);
}
}
priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
if (priv->use_riwt) {
- ret = stmmac_rx_watchdog(priv, priv->ioaddr, MAX_DMA_RIWT, rx_cnt);
+ ret = stmmac_rx_watchdog(priv, priv->ioaddr, MIN_DMA_RIWT, rx_cnt);
if (!ret)
- priv->rx_riwt = MAX_DMA_RIWT;
+ priv->rx_riwt = MIN_DMA_RIWT;
}
if (priv->hw->pcs)
stmmac_init_tx_coalesce(priv);
- if (dev->phydev)
- phy_start(dev->phydev);
+ phylink_start(priv->phylink);
/* Request the IRQ lines */
ret = request_irq(dev->irq, stmmac_interrupt,
wolirq_error:
free_irq(dev->irq, dev);
irq_error:
- if (dev->phydev)
- phy_stop(dev->phydev);
+ phylink_stop(priv->phylink);
for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
del_timer_sync(&priv->tx_queue[chan].txtimer);
init_error:
free_dma_desc_resources(priv);
dma_desc_error:
- if (dev->phydev)
- phy_disconnect(dev->phydev);
-
+ phylink_disconnect_phy(priv->phylink);
return ret;
}
del_timer_sync(&priv->eee_ctrl_timer);
/* Stop and disconnect the PHY */
- if (dev->phydev) {
- phy_stop(dev->phydev);
- phy_disconnect(dev->phydev);
- }
+ phylink_stop(priv->phylink);
+ phylink_disconnect_phy(priv->phylink);
stmmac_stop_all_queues(priv);
* This function fills descriptor and request new descriptors according to
* buffer length to fill
*/
-static void stmmac_tso_allocator(struct stmmac_priv *priv, unsigned int des,
+static void stmmac_tso_allocator(struct stmmac_priv *priv, dma_addr_t des,
int total_len, bool last_segment, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
tmp_len = total_len;
while (tmp_len > 0) {
+ dma_addr_t curr_addr;
+
tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, DMA_TX_SIZE);
WARN_ON(tx_q->tx_skbuff[tx_q->cur_tx]);
desc = tx_q->dma_tx + tx_q->cur_tx;
- desc->des0 = cpu_to_le32(des + (total_len - tmp_len));
+ curr_addr = des + (total_len - tmp_len);
+ if (priv->dma_cap.addr64 <= 32)
+ desc->des0 = cpu_to_le32(curr_addr);
+ else
+ stmmac_set_desc_addr(priv, desc, curr_addr);
+
buff_size = tmp_len >= TSO_MAX_BUFF_SIZE ?
TSO_MAX_BUFF_SIZE : tmp_len;
struct stmmac_priv *priv = netdev_priv(dev);
int nfrags = skb_shinfo(skb)->nr_frags;
u32 queue = skb_get_queue_mapping(skb);
- unsigned int first_entry, des;
+ unsigned int first_entry;
struct stmmac_tx_queue *tx_q;
int tmp_pay_len = 0;
u32 pay_len, mss;
u8 proto_hdr_len;
+ dma_addr_t des;
int i;
tx_q = &priv->tx_queue[queue];
tx_q->tx_skbuff_dma[first_entry].buf = des;
tx_q->tx_skbuff_dma[first_entry].len = skb_headlen(skb);
- first->des0 = cpu_to_le32(des);
+ if (priv->dma_cap.addr64 <= 32) {
+ first->des0 = cpu_to_le32(des);
- /* Fill start of payload in buff2 of first descriptor */
- if (pay_len)
- first->des1 = cpu_to_le32(des + proto_hdr_len);
+ /* Fill start of payload in buff2 of first descriptor */
+ if (pay_len)
+ first->des1 = cpu_to_le32(des + proto_hdr_len);
- /* If needed take extra descriptors to fill the remaining payload */
- tmp_pay_len = pay_len - TSO_MAX_BUFF_SIZE;
+ /* If needed take extra descriptors to fill the remaining payload */
+ tmp_pay_len = pay_len - TSO_MAX_BUFF_SIZE;
+ } else {
+ stmmac_set_desc_addr(priv, first, des);
+ tmp_pay_len = pay_len;
+ }
stmmac_tso_allocator(priv, des, tmp_pay_len, (nfrags == 0), queue);
/* Manage tx mitigation */
tx_q->tx_count_frames += nfrags + 1;
- if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+ (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ tx_q->tx_count_frames = 0;
stmmac_set_tx_ic(priv, desc);
priv->xstats.tx_set_ic_bit++;
- tx_q->tx_count_frames = 0;
- } else {
- stmmac_tx_timer_arm(priv, queue);
}
skb_tx_timestamp(skb);
int i, csum_insertion = 0, is_jumbo = 0;
u32 queue = skb_get_queue_mapping(skb);
int nfrags = skb_shinfo(skb)->nr_frags;
- int entry;
- unsigned int first_entry;
struct dma_desc *desc, *first;
struct stmmac_tx_queue *tx_q;
+ unsigned int first_entry;
unsigned int enh_desc;
- unsigned int des;
+ dma_addr_t des;
+ int entry;
tx_q = &priv->tx_queue[queue];
* element in case of no SG.
*/
tx_q->tx_count_frames += nfrags + 1;
- if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+ (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ tx_q->tx_count_frames = 0;
stmmac_set_tx_ic(priv, desc);
priv->xstats.tx_set_ic_bit++;
- tx_q->tx_count_frames = 0;
- } else {
- stmmac_tx_timer_arm(priv, queue);
}
skb_tx_timestamp(skb);
work_done = stmmac_tx_clean(priv, DMA_TX_SIZE, chan);
work_done = min(work_done, budget);
- if (work_done < budget && napi_complete_done(napi, work_done))
- stmmac_enable_dma_irq(priv, priv->ioaddr, chan);
+ if (work_done < budget)
+ napi_complete_done(napi, work_done);
/* Force transmission restart */
tx_q = &priv->tx_queue[chan];
*/
static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
+ struct stmmac_priv *priv = netdev_priv (dev);
int ret = -EOPNOTSUPP;
if (!netif_running(dev))
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
- if (!dev->phydev)
- return -EINVAL;
- ret = phy_mii_ioctl(dev->phydev, rq, cmd);
+ ret = phylink_mii_ioctl(priv->phylink, rq, cmd);
break;
case SIOCSHWTSTAMP:
ret = stmmac_hwtstamp_set(dev, rq);
u32 queue, maxq;
int ret = 0;
- ndev = alloc_etherdev_mqs(sizeof(struct stmmac_priv),
- MTL_MAX_TX_QUEUES,
- MTL_MAX_RX_QUEUES);
+ ndev = devm_alloc_etherdev_mqs(device, sizeof(struct stmmac_priv),
+ MTL_MAX_TX_QUEUES, MTL_MAX_RX_QUEUES);
if (!ndev)
return -ENOMEM;
priv->wq = create_singlethread_workqueue("stmmac_wq");
if (!priv->wq) {
dev_err(priv->device, "failed to create workqueue\n");
- ret = -ENOMEM;
- goto error_wq;
+ return -ENOMEM;
}
INIT_WORK(&priv->service_task, stmmac_service_task);
priv->tso = true;
dev_info(priv->device, "TSO feature enabled\n");
}
+
+ if (priv->dma_cap.addr64) {
+ ret = dma_set_mask_and_coherent(device,
+ DMA_BIT_MASK(priv->dma_cap.addr64));
+ if (!ret) {
+ dev_info(priv->device, "Using %d bits DMA width\n",
+ priv->dma_cap.addr64);
+ } else {
+ ret = dma_set_mask_and_coherent(device, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(priv->device, "Failed to set DMA Mask\n");
+ goto error_hw_init;
+ }
+
+ priv->dma_cap.addr64 = 32;
+ }
+ }
+
ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
#ifdef STMMAC_VLAN_TAG_USED
}
}
+ ret = stmmac_phy_setup(priv);
+ if (ret) {
+ netdev_err(ndev, "failed to setup phy (%d)\n", ret);
+ goto error_phy_setup;
+ }
+
ret = register_netdev(ndev);
if (ret) {
dev_err(priv->device, "%s: ERROR %i registering the device\n",
return ret;
error_netdev_register:
+ phylink_destroy(priv->phylink);
+error_phy_setup:
if (priv->hw->pcs != STMMAC_PCS_RGMII &&
priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI)
}
error_hw_init:
destroy_workqueue(priv->wq);
-error_wq:
- free_netdev(ndev);
return ret;
}
stmmac_mac_set(priv, priv->ioaddr, false);
netif_carrier_off(ndev);
unregister_netdev(ndev);
+ phylink_destroy(priv->phylink);
if (priv->plat->stmmac_rst)
reset_control_assert(priv->plat->stmmac_rst);
clk_disable_unprepare(priv->plat->pclk);
stmmac_mdio_unregister(ndev);
destroy_workqueue(priv->wq);
mutex_destroy(&priv->lock);
- free_netdev(ndev);
return 0;
}
if (!ndev || !netif_running(ndev))
return 0;
- if (ndev->phydev)
- phy_stop(ndev->phydev);
+ phylink_stop(priv->phylink);
mutex_lock(&priv->lock);
}
mutex_unlock(&priv->lock);
- priv->oldlink = false;
priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
return 0;
}
EXPORT_SYMBOL_GPL(stmmac_suspend);
mutex_unlock(&priv->lock);
- if (ndev->phydev)
- phy_start(ndev->phydev);
+ phylink_start(priv->phylink);
return 0;
}
projects / linux-2.6-microblaze.git / blobdiff