treewide: replace '---help---' in Kconfig files with 'help'

[linux-2.6-microblaze.git] / drivers / net / ethernet / mellanox / mlx5 / core / Kconfig

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index b6ffd16..4dfdbb8 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -12,7 +12,7 @@ config MLX5_CORE
        depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
        depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
        default n
-       ---help---
+       help
          Core driver for low level functionality of the ConnectX-4 and
          Connect-IB cards by Mellanox Technologies.
 
@@ -23,7 +23,7 @@ config MLX5_FPGA
        bool "Mellanox Technologies Innova support"
        depends on MLX5_CORE
        select MLX5_ACCEL
-       ---help---
+       help
          Build support for the Innova family of network cards by Mellanox
          Technologies. Innova network cards are comprised of a ConnectX chip
          and an FPGA chip on one board. If you select this option, the
@@ -36,14 +36,14 @@ config MLX5_CORE_EN
        select PAGE_POOL
        select DIMLIB
        default n
-       ---help---
+       help
          Ethernet support in Mellanox Technologies ConnectX-4 NIC.
 
 config MLX5_EN_ARFS
        bool "Mellanox MLX5 ethernet accelerated receive flow steering (ARFS) support"
        depends on MLX5_CORE_EN && RFS_ACCEL
        default y
-       ---help---
+       help
          Mellanox MLX5 ethernet hardware-accelerated receive flow steering support,
          Enables ethernet netdevice arfs support and ntuple filtering.
 
@@ -51,7 +51,7 @@ config MLX5_EN_RXNFC
        bool "Mellanox MLX5 ethernet rx nfc flow steering support"
        depends on MLX5_CORE_EN
        default y
-       ---help---
+       help
          Mellanox MLX5 ethernet rx nfc flow steering support
          Enables ethtool receive network flow classification, which allows user defined
          flow rules to direct traffic into arbitrary rx queue via ethtool set/get_rxnfc
@@ -61,7 +61,7 @@ config MLX5_MPFS
        bool "Mellanox Technologies MLX5 MPFS support"
        depends on MLX5_CORE_EN
        default y
-       ---help---
+       help
          Mellanox Technologies Ethernet Multi-Physical Function Switch (MPFS)
          support in ConnectX NIC. MPFs is required for when multi-PF configuration
          is enabled to allow passing user configured unicast MAC addresses to the
@@ -71,7 +71,7 @@ config MLX5_ESWITCH
        bool "Mellanox Technologies MLX5 SRIOV E-Switch support"
        depends on MLX5_CORE_EN && NET_SWITCHDEV
        default y
-       ---help---
+       help
          Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC.
          E-Switch provides internal SRIOV packet steering and switching for the
          enabled VFs and PF in two available modes:
@@ -107,7 +107,7 @@ config MLX5_CORE_EN_DCB
        bool "Data Center Bridging (DCB) Support"
        default y
        depends on MLX5_CORE_EN && DCB
-       ---help---
+       help
          Say Y here if you want to use Data Center Bridging (DCB) in the
          driver.
          If set to N, will not be able to configure QoS and ratelimit attributes.
@@ -119,7 +119,7 @@ config MLX5_CORE_IPOIB
        bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support"
        depends on MLX5_CORE_EN
        default n
-       ---help---
+       help
          MLX5 IPoIB offloads & acceleration support.
 
 config MLX5_FPGA_IPSEC