config NET_VENDOR_INTEL
bool "Intel devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
tristate "Intel(R) PRO/100+ support"
depends on PCI
select MII
- ---help---
+ help
This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
depends on PCI && (!SPARC32 || BROKEN)
select CRC32
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
use the regular e1000 driver For more information on how to
bool "Support HW cross-timestamp on PCH devices"
default y
depends on E1000E && X86
- ---help---
+ help
Say Y to enable hardware supported cross-timestamping on PCH
devices. The cross-timestamp is available through the PTP clock
driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
imply PTP_1588_CLOCK
select I2C
select I2C_ALGOBIT
- ---help---
+ help
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
default y
depends on IGB && HWMON && !(IGB=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose thermal sensor data on Intel devices.
Some of our devices contain thermal sensors, both external and internal.
bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
config IGBVF
tristate "Intel(R) 82576 Virtual Function Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) 82576 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide that can be located at:
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) PRO/10GbE family of adapters for
PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
instead. For more information on how to identify your adapter, go
select MDIO
select PHYLIB
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
bool "Intel(R) 10GbE PCI Express adapters HWMON support"
default y
depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose the thermal sensor data on some of
our cards, via a hwmon sysfs interface.
bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
bool "Data Center Bridging (DCB) Support"
default n
depends on IXGBE && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
depends on XFRM_OFFLOAD
default y
select XFRM_ALGO
- ---help---
+ help
Enable support for IPSec offload in ixgbe.ko
config IXGBEVF
tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
depends on PCI_MSI
- ---help---
+ help
This driver supports Intel(R) PCI Express virtual functions for the
Intel(R) ixgbe driver. For more information on how to identify your
adapter, go to the Adapter & Driver ID Guide that can be located at:
depends on XFRM_OFFLOAD
default y
select XFRM_ALGO
- ---help---
+ help
Enable support for IPSec offload in ixgbevf.ko
config I40E
tristate "Intel(R) Ethernet Controller XL710 Family support"
imply PTP_1588_CLOCK
depends on PCI
- ---help---
+ help
This driver supports Intel(R) Ethernet Controller XL710 Family of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
bool "Data Center Bridging (DCB) Support"
default n
depends on I40E && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
tristate "Intel(R) Ethernet Adaptive Virtual Function support"
select IAVF
depends on PCI_MSI
- ---help---
+ help
This driver supports virtual functions for Intel XL710,
X710, X722, XXV710, and all devices advertising support for
Intel Ethernet Adaptive Virtual Function devices. For more
default n
depends on PCI_MSI
select NET_DEVLINK
- ---help---
+ help
This driver supports Intel(R) Ethernet Connection E800 Series of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
default n
depends on PCI_MSI
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Intel(R) FM10000 Ethernet Switch Host
Interface. For more information on how to identify your adapter,
go to the Adapter & Driver ID Guide that can be located at:
tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
default n
depends on PCI
- ---help---
+ help
This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
family of adapters.
projects / linux-2.6-microblaze.git / blobdiff