int i, cos, old_eth_num = BNX2X_NUM_ETH_QUEUES(bp);
/* Queue pointer cannot be re-set on an fp-basis, as moving pointer
- * backward along the array could cause memory to be overriden
+ * backward along the array could cause memory to be overridden
*/
for (cos = 1; cos < bp->max_cos; cos++) {
for (i = 0; i < old_eth_num - delta; i++) {
dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE);
-
nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
#ifdef BNX2X_STOP_ON_ERROR
if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) {
smp_mb();
if (unlikely(netif_tx_queue_stopped(txq))) {
- /* Taking tx_lock() is needed to prevent reenabling the queue
+ /* Taking tx_lock() is needed to prevent re-enabling the queue
* while it's empty. This could have happen if rx_action() gets
* suspended in bnx2x_tx_int() after the condition before
* netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()):
return err;
}
- /* Unmap the page as we r going to pass it to the stack */
+ /* Unmap the page as we're going to pass it to the stack */
dma_unmap_page(&bp->pdev->dev,
dma_unmap_addr(&old_rx_pg, mapping),
SGE_PAGES, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
}
-
/* put new data in bin */
rx_buf->data = new_data;
cqe_fp);
goto next_rx;
-
}
queue = cqe->end_agg_cqe.queue_index;
tpa_info = &fp->tpa_info[queue];
le16_to_cpu(cqe_fp->vlan_tag));
napi_gro_receive(&fp->napi, skb);
-
next_rx:
rx_buf->data = NULL;
memset(data, 0, sizeof(*data));
- /* Fill the report data: efective line speed */
+ /* Fill the report data: effective line speed */
data->line_speed = line_speed;
/* Link is down */
*
* @bp: driver handle
*
- * None atomic inmlementation.
+ * None atomic implementation.
* Should be called under the phy_lock.
*/
void __bnx2x_link_report(struct bnx2x *bp)
"mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
if (!fp->disable_tpa) {
- /* Fill the per-aggregtion pool */
+ /* Fill the per-aggregation pool */
for (i = 0; i < MAX_AGG_QS(bp); i++) {
struct bnx2x_agg_info *tpa_info =
&fp->tpa_info[i];
}
/* select a non-FCoE queue */
- return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp));
+ return __netdev_pick_tx(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp);
}
void bnx2x_set_num_queues(struct bnx2x *bp)
*
* If the actual number of Tx queues (for each CoS) is less than 16 then there
* will be the holes at the end of each group of 16 ETh L2 indices (0..15,
- * 16..31,...) with indicies that are not coupled with any real Tx queue.
+ * 16..31,...) with indices that are not coupled with any real Tx queue.
*
* The proper configuration of skb->queue_mapping is handled by
* bnx2x_select_queue() and __skb_tx_hash().
ETH_OVREHEAD +
mtu +
BNX2X_FW_RX_ALIGN_END;
- /* Note : rx_buf_size doesnt take into account NET_SKB_PAD */
+ /* Note : rx_buf_size doesn't take into account NET_SKB_PAD */
if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE)
fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD;
else
int i;
u8 num_eth_queues = BNX2X_NUM_ETH_QUEUES(bp);
- /* Prepare the initial contents fo the indirection table if RSS is
+ /* Prepare the initial contents for the indirection table if RSS is
* enabled
*/
for (i = 0; i < sizeof(bp->rss_conf_obj.ind_table); i++)
/*
* Cleans the object that have internal lists without sending
- * ramrods. Should be run when interrutps are disabled.
+ * ramrods. Should be run when interrupts are disabled.
*/
void bnx2x_squeeze_objects(struct bnx2x *bp)
{
bp->fw_stats_data_mapping = bp->fw_stats_mapping +
bp->fw_stats_req_sz;
- DP(BNX2X_MSG_SP, "statistics request base address set to %x %x",
+ DP(BNX2X_MSG_SP, "statistics request base address set to %x %x\n",
U64_HI(bp->fw_stats_req_mapping),
U64_LO(bp->fw_stats_req_mapping));
- DP(BNX2X_MSG_SP, "statistics data base address set to %x %x",
+ DP(BNX2X_MSG_SP, "statistics data base address set to %x %x\n",
U64_HI(bp->fw_stats_data_mapping),
U64_LO(bp->fw_stats_data_mapping));
return 0;
/* send load request to mcp and analyze response */
static int bnx2x_nic_load_request(struct bnx2x *bp, u32 *load_code)
{
+ u32 param;
+
/* init fw_seq */
bp->fw_seq =
(SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
DRV_PULSE_SEQ_MASK);
BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
+ param = DRV_MSG_CODE_LOAD_REQ_WITH_LFA;
+
+ if (IS_MF_SD(bp) && bnx2x_port_after_undi(bp))
+ param |= DRV_MSG_CODE_LOAD_REQ_FORCE_LFA;
+
/* load request */
- (*load_code) = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ,
- DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
+ (*load_code) = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, param);
/* if mcp fails to respond we must abort */
if (!(*load_code)) {
/* abort nic load if version mismatch */
if (my_fw != loaded_fw) {
- BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. aborting\n",
+ BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",
loaded_fw, my_fw);
return -EBUSY;
}
static void bnx2x_bz_fp(struct bnx2x *bp, int index)
{
struct bnx2x_fastpath *fp = &bp->fp[index];
-
int cos;
struct napi_struct orig_napi = fp->napi;
struct bnx2x_agg_info *orig_tpa_info = fp->tpa_info;
+
/* bzero bnx2x_fastpath contents */
if (fp->tpa_info)
memset(fp->tpa_info, 0, ETH_MAX_AGGREGATION_QUEUES_E1H_E2 *
fp->txdata_ptr[cos] = &bp->bnx2x_txq[cos *
BNX2X_NUM_ETH_QUEUES(bp) + index];
- /*
- * set the tpa flag for each queue. The tpa flag determines the queue
+ /* set the tpa flag for each queue. The tpa flag determines the queue
* minimal size so it must be set prior to queue memory allocation
*/
fp->disable_tpa = !(bp->flags & TPA_ENABLE_FLAG ||
if (bp->state == BNX2X_STATE_OPEN)
bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD);
-
DP(NETIF_MSG_IFUP, "Ending successfully CNIC-related load\n");
return 0;
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
+ /* zero the structure w/o any lock, before SP handler is initialized */
memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
&bp->last_reported_link.link_report_flags);
}
/* configure multi cos mappings in kernel.
- * this configuration may be overriden by a multi class queue discipline
- * or by a dcbx negotiation result.
+ * this configuration may be overridden by a multi class queue
+ * discipline or by a dcbx negotiation result.
*/
bnx2x_setup_tc(bp->dev, bp->max_cos);
/* Start the Tx */
switch (load_mode) {
case LOAD_NORMAL:
- /* Tx queue should be only reenabled */
+ /* Tx queue should be only re-enabled */
netif_tx_wake_all_queues(bp->dev);
break;
}
/* Nothing to do during unload if previous bnx2x_nic_load()
- * have not completed succesfully - all resourses are released.
+ * have not completed successfully - all resources are released.
*
* we can get here only after unsuccessful ndo_* callback, during which
* dev->IFF_UP flag is still on.
/* Send the UNLOAD_REQUEST to the MCP */
bnx2x_send_unload_req(bp, unload_mode);
- /*
- * Prevent transactions to host from the functions on the
+ /* Prevent transactions to host from the functions on the
* engine that doesn't reset global blocks in case of global
- * attention once gloabl blocks are reset and gates are opened
+ * attention once global blocks are reset and gates are opened
* (the engine which leader will perform the recovery
* last).
*/
}
/*
- * At this stage no more interrupts will arrive so we may safly clean
+ * At this stage no more interrupts will arrive so we may safely clean
* the queueable objects here in case they failed to get cleaned so far.
*/
if (IS_PF(bp))
bnx2x_set_reset_global(bp);
}
-
/* The last driver must disable a "close the gate" if there is no
* parity attention or "process kill" pending.
*/
DP(NETIF_MSG_TX_QUEUED, "indices: txq %d, fp %d, txdata %d\n",
txq_index, fp_index, txdata_index); */
- /* enable this debug print to view the tranmission details
+ /* enable this debug print to view the transmission details
DP(NETIF_MSG_TX_QUEUED,
"transmitting packet cid %d fp index %d txdata_index %d tx_data ptr %p fp pointer %p\n",
txdata->cid, fp_index, txdata_index, txdata, fp); */
/* setup tc must be called under rtnl lock */
ASSERT_RTNL();
- /* no traffic classes requested. aborting */
+ /* no traffic classes requested. Aborting */
if (!num_tc) {
netdev_reset_tc(dev);
return 0;
/* requested to support too many traffic classes */
if (num_tc > bp->max_cos) {
- BNX2X_ERR("support for too many traffic classes requested: %d. max supported is %d\n",
+ BNX2X_ERR("support for too many traffic classes requested: %d. Max supported is %d\n",
num_tc, bp->max_cos);
return -EINVAL;
}
prio, bp->prio_to_cos[prio]);
}
-
- /* Use this configuration to diffrentiate tc0 from other COSes
+ /* Use this configuration to differentiate tc0 from other COSes
This can be used for ets or pfc, and save the effort of setting
up a multio class queue disc or negotiating DCBX with a switch
netdev_set_prio_tc_map(dev, 0, 0);
alloc_err:
bnx2x_free_mem_bp(bp);
return -ENOMEM;
-
}
int bnx2x_reload_if_running(struct net_device *dev)
}
return sel_phy_idx;
-
}
int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
{
{
struct bnx2x *bp = netdev_priv(dev);
u32 flags = bp->flags;
+ u32 changes;
bool bnx2x_reload = false;
if (features & NETIF_F_LRO)
}
}
- if (flags ^ bp->flags) {
- bp->flags = flags;
+ changes = flags ^ bp->flags;
+
+ /* if GRO is changed while LRO is enabled, don't force a reload */
+ if ((changes & GRO_ENABLE_FLAG) && (flags & TPA_ENABLE_FLAG))
+ changes &= ~GRO_ENABLE_FLAG;
+
+ if (changes)
bnx2x_reload = true;
- }
+
+ bp->flags = flags;
if (bnx2x_reload) {
if (bp->recovery_state == BNX2X_RECOVERY_DONE)
return rc;
}
-
void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt,
u32 cid)
{
u8 fw_sb_id, u8 sb_index,
u8 ticks)
{
-
u32 addr = BAR_CSTRORM_INTMEM +
CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index);
REG_WR8(bp, addr, ticks);
projects / linux-2.6-microblaze.git / blobdiff