// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
+/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
* Copyright (C) 2006 Andrey Volkov, Varma Electronics
* Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
*/
#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */
#define CAN_CALC_SYNC_SEG 1
-/*
- * Bit-timing calculation derived from:
+/* Bit-timing calculation derived from:
*
* Code based on LinCAN sources and H8S2638 project
* Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz
* registers of the CAN controller. You can find more information
* in the header file linux/can/netlink.h.
*/
-static int can_update_sample_point(const struct can_bittiming_const *btc,
- unsigned int sample_point_nominal, unsigned int tseg,
- unsigned int *tseg1_ptr, unsigned int *tseg2_ptr,
- unsigned int *sample_point_error_ptr)
+static int
+can_update_sample_point(const struct can_bittiming_const *btc,
+ unsigned int sample_point_nominal, unsigned int tseg,
+ unsigned int *tseg1_ptr, unsigned int *tseg2_ptr,
+ unsigned int *sample_point_error_ptr)
{
unsigned int sample_point_error, best_sample_point_error = UINT_MAX;
unsigned int sample_point, best_sample_point = 0;
int i;
for (i = 0; i <= 1; i++) {
- tseg2 = tseg + CAN_CALC_SYNC_SEG - (sample_point_nominal * (tseg + CAN_CALC_SYNC_SEG)) / 1000 - i;
+ tseg2 = tseg + CAN_CALC_SYNC_SEG -
+ (sample_point_nominal * (tseg + CAN_CALC_SYNC_SEG)) /
+ 1000 - i;
tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max);
tseg1 = tseg - tseg2;
if (tseg1 > btc->tseg1_max) {
tseg2 = tseg - tseg1;
}
- sample_point = 1000 * (tseg + CAN_CALC_SYNC_SEG - tseg2) / (tseg + CAN_CALC_SYNC_SEG);
+ sample_point = 1000 * (tseg + CAN_CALC_SYNC_SEG - tseg2) /
+ (tseg + CAN_CALC_SYNC_SEG);
sample_point_error = abs(sample_point_nominal - sample_point);
- if ((sample_point <= sample_point_nominal) && (sample_point_error < best_sample_point_error)) {
+ if ((sample_point <= sample_point_nominal) &&
+ (sample_point_error < best_sample_point_error)) {
best_sample_point = sample_point;
best_sample_point_error = sample_point_error;
*tseg1_ptr = tseg1;
if (bitrate_error < best_bitrate_error)
best_sample_point_error = UINT_MAX;
- can_update_sample_point(btc, sample_point_nominal, tseg / 2, &tseg1, &tseg2, &sample_point_error);
+ can_update_sample_point(btc, sample_point_nominal, tseg / 2,
+ &tseg1, &tseg2, &sample_point_error);
if (sample_point_error > best_sample_point_error)
continue;
}
/* real sample point */
- bt->sample_point = can_update_sample_point(btc, sample_point_nominal, best_tseg,
- &tseg1, &tseg2, NULL);
+ bt->sample_point = can_update_sample_point(btc, sample_point_nominal,
+ best_tseg, &tseg1, &tseg2,
+ NULL);
v64 = (u64)best_brp * 1000 * 1000 * 1000;
do_div(v64, priv->clock.freq);
bt->brp = best_brp;
/* real bitrate */
- bt->bitrate = priv->clock.freq / (bt->brp * (CAN_CALC_SYNC_SEG + tseg1 + tseg2));
+ bt->bitrate = priv->clock.freq /
+ (bt->brp * (CAN_CALC_SYNC_SEG + tseg1 + tseg2));
return 0;
}
}
#endif /* CONFIG_CAN_CALC_BITTIMING */
-/*
- * Checks the validity of the specified bit-timing parameters prop_seg,
+/* Checks the validity of the specified bit-timing parameters prop_seg,
* phase_seg1, phase_seg2 and sjw and tries to determine the bitrate
* prescaler value brp. You can find more information in the header
* file linux/can/netlink.h.
}
/* Checks the validity of predefined bitrate settings */
-static int can_validate_bitrate(struct net_device *dev, struct can_bittiming *bt,
- const u32 *bitrate_const,
- const unsigned int bitrate_const_cnt)
+static int
+can_validate_bitrate(struct net_device *dev, struct can_bittiming *bt,
+ const u32 *bitrate_const,
+ const unsigned int bitrate_const_cnt)
{
struct can_priv *priv = netdev_priv(dev);
unsigned int i;
{
int err;
- /*
- * Depending on the given can_bittiming parameter structure the CAN
+ /* Depending on the given can_bittiming parameter structure the CAN
* timing parameters are calculated based on the provided bitrate OR
* alternatively the CAN timing parameters (tq, prop_seg, etc.) are
* provided directly which are then checked and fixed up.
}
EXPORT_SYMBOL_GPL(can_change_state);
-/*
- * Local echo of CAN messages
+/* Local echo of CAN messages
*
* CAN network devices *should* support a local echo functionality
* (see Documentation/networking/can.rst). To test the handling of CAN
}
}
-/*
- * Put the skb on the stack to be looped backed locally lateron
+/* Put the skb on the stack to be looped backed locally lateron
*
* The function is typically called in the start_xmit function
* of the device driver. The driver must protect access to
}
EXPORT_SYMBOL_GPL(can_put_echo_skb);
-struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
+struct sk_buff *
+__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
{
struct can_priv *priv = netdev_priv(dev);
return NULL;
}
-/*
- * Get the skb from the stack and loop it back locally
+/* Get the skb from the stack and loop it back locally
*
* The function is typically called when the TX done interrupt
* is handled in the device driver. The driver must protect
}
EXPORT_SYMBOL_GPL(can_get_echo_skb);
-/*
- * Remove the skb from the stack and free it.
- *
- * The function is typically called when TX failed.
- */
+/* Remove the skb from the stack and free it.
+ *
+ * The function is typically called when TX failed.
+ */
void can_free_echo_skb(struct net_device *dev, unsigned int idx)
{
struct can_priv *priv = netdev_priv(dev);
}
EXPORT_SYMBOL_GPL(can_free_echo_skb);
-/*
- * CAN device restart for bus-off recovery
- */
+/* CAN device restart for bus-off recovery */
static void can_restart(struct net_device *dev)
{
struct can_priv *priv = netdev_priv(dev);
BUG_ON(netif_carrier_ok(dev));
- /*
- * No synchronization needed because the device is bus-off and
+ /* No synchronization needed because the device is bus-off and
* no messages can come in or go out.
*/
can_flush_echo_skb(dev);
static void can_restart_work(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
- struct can_priv *priv = container_of(dwork, struct can_priv, restart_work);
+ struct can_priv *priv = container_of(dwork, struct can_priv,
+ restart_work);
can_restart(priv->dev);
}
{
struct can_priv *priv = netdev_priv(dev);
- /*
- * A manual restart is only permitted if automatic restart is
+ /* A manual restart is only permitted if automatic restart is
* disabled and the device is in the bus-off state
*/
if (priv->restart_ms)
return 0;
}
-/*
- * CAN bus-off
+/* CAN bus-off
*
* This functions should be called when the device goes bus-off to
* tell the netif layer that no more packets can be sent or received.
}
EXPORT_SYMBOL_GPL(alloc_can_err_skb);
-/*
- * Allocate and setup space for the CAN network device
- */
+/* Allocate and setup space for the CAN network device */
struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
unsigned int txqs, unsigned int rxqs)
{
}
EXPORT_SYMBOL_GPL(alloc_candev_mqs);
-/*
- * Free space of the CAN network device
- */
+/* Free space of the CAN network device */
void free_candev(struct net_device *dev)
{
free_netdev(dev);
}
EXPORT_SYMBOL_GPL(free_candev);
-/*
- * changing MTU and control mode for CAN/CANFD devices
- */
+/* changing MTU and control mode for CAN/CANFD devices */
int can_change_mtu(struct net_device *dev, int new_mtu)
{
struct can_priv *priv = netdev_priv(dev);
}
EXPORT_SYMBOL_GPL(can_change_mtu);
-/*
- * Common open function when the device gets opened.
+/* Common open function when the device gets opened.
*
* This function should be called in the open function of the device
* driver.
EXPORT_SYMBOL_GPL(of_can_transceiver);
#endif
-/*
- * Common close function for cleanup before the device gets closed.
+/* Common close function for cleanup before the device gets closed.
*
* This function should be called in the close function of the device
* driver.
}
EXPORT_SYMBOL_GPL(close_candev);
-/*
- * CAN netlink interface
- */
+/* CAN netlink interface */
static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
[IFLA_CAN_STATE] = { .type = NLA_U32 },
[IFLA_CAN_CTRLMODE] = { .len = sizeof(struct can_ctrlmode) },
.fill_xstats = can_fill_xstats,
};
-/*
- * Register the CAN network device
- */
+/* Register the CAN network device */
int register_candev(struct net_device *dev)
{
struct can_priv *priv = netdev_priv(dev);
}
EXPORT_SYMBOL_GPL(register_candev);
-/*
- * Unregister the CAN network device
- */
+/* Unregister the CAN network device */
void unregister_candev(struct net_device *dev)
{
unregister_netdev(dev);
}
EXPORT_SYMBOL_GPL(unregister_candev);
-/*
- * Test if a network device is a candev based device
+/* Test if a network device is a candev based device
* and return the can_priv* if so.
*/
struct can_priv *safe_candev_priv(struct net_device *dev)