#include <linux/netlink.h>
#include <net/Space.h>
+/*
+ * This structure holds boot-time configured netdevice settings. They
+ * are then used in the device probing.
+ */
+struct netdev_boot_setup {
+ char name[IFNAMSIZ];
+ struct ifmap map;
+};
+#define NETDEV_BOOT_SETUP_MAX 8
+
+
+/******************************************************************************
+ *
+ * Device Boot-time Settings Routines
+ *
+ ******************************************************************************/
+
+/* Boot time configuration table */
+static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
+
+/**
+ * netdev_boot_setup_add - add new setup entry
+ * @name: name of the device
+ * @map: configured settings for the device
+ *
+ * Adds new setup entry to the dev_boot_setup list. The function
+ * returns 0 on error and 1 on success. This is a generic routine to
+ * all netdevices.
+ */
+static int netdev_boot_setup_add(char *name, struct ifmap *map)
+{
+ struct netdev_boot_setup *s;
+ int i;
+
+ s = dev_boot_setup;
+ for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
+ if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
+ memset(s[i].name, 0, sizeof(s[i].name));
+ strlcpy(s[i].name, name, IFNAMSIZ);
+ memcpy(&s[i].map, map, sizeof(s[i].map));
+ break;
+ }
+ }
+
+ return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
+}
+
+/**
+ * netdev_boot_setup_check - check boot time settings
+ * @dev: the netdevice
+ *
+ * Check boot time settings for the device.
+ * The found settings are set for the device to be used
+ * later in the device probing.
+ * Returns 0 if no settings found, 1 if they are.
+ */
+int netdev_boot_setup_check(struct net_device *dev)
+{
+ struct netdev_boot_setup *s = dev_boot_setup;
+ int i;
+
+ for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
+ if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
+ !strcmp(dev->name, s[i].name)) {
+ dev->irq = s[i].map.irq;
+ dev->base_addr = s[i].map.base_addr;
+ dev->mem_start = s[i].map.mem_start;
+ dev->mem_end = s[i].map.mem_end;
+ return 1;
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL(netdev_boot_setup_check);
+
+/**
+ * netdev_boot_base - get address from boot time settings
+ * @prefix: prefix for network device
+ * @unit: id for network device
+ *
+ * Check boot time settings for the base address of device.
+ * The found settings are set for the device to be used
+ * later in the device probing.
+ * Returns 0 if no settings found.
+ */
+static unsigned long netdev_boot_base(const char *prefix, int unit)
+{
+ const struct netdev_boot_setup *s = dev_boot_setup;
+ char name[IFNAMSIZ];
+ int i;
+
+ sprintf(name, "%s%d", prefix, unit);
+
+ /*
+ * If device already registered then return base of 1
+ * to indicate not to probe for this interface
+ */
+ if (__dev_get_by_name(&init_net, name))
+ return 1;
+
+ for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
+ if (!strcmp(name, s[i].name))
+ return s[i].map.base_addr;
+ return 0;
+}
+
+/*
+ * Saves at boot time configured settings for any netdevice.
+ */
+static int __init netdev_boot_setup(char *str)
+{
+ int ints[5];
+ struct ifmap map;
+
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+ if (!str || !*str)
+ return 0;
+
+ /* Save settings */
+ memset(&map, 0, sizeof(map));
+ if (ints[0] > 0)
+ map.irq = ints[1];
+ if (ints[0] > 1)
+ map.base_addr = ints[2];
+ if (ints[0] > 2)
+ map.mem_start = ints[3];
+ if (ints[0] > 3)
+ map.mem_end = ints[4];
+
+ /* Add new entry to the list */
+ return netdev_boot_setup_add(str, &map);
+}
+
+__setup("netdev=", netdev_boot_setup);
+
+static int __init ether_boot_setup(char *str)
+{
+ return netdev_boot_setup(str);
+}
+__setup("ether=", ether_boot_setup);
+
+
/* A unified ethernet device probe. This is the easiest way to have every
* ethernet adaptor have the name "eth[0123...]".
*/
#ifdef CONFIG_SMC9194
{smc_init, 0},
#endif
-#ifdef CONFIG_CS89x0
-#ifndef CONFIG_CS89x0_PLATFORM
+#ifdef CONFIG_CS89x0_ISA
{cs89x0_probe, 0},
#endif
-#endif
-#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel */
- {i82596_probe, 0}, /* I82596 */
-#endif
#ifdef CONFIG_NI65
{ni65_probe, 0},
#endif
{NULL, 0},
};
-static struct devprobe2 m68k_probes[] __initdata = {
-#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
- {atarilance_probe, 0},
-#endif
-#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
- {sun3lance_probe, 0},
-#endif
-#ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */
- {sun3_82586_probe, 0},
-#endif
-#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
- {apne_probe, 0},
-#endif
-#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
- {mvme147lance_probe, 0},
-#endif
- {NULL, 0},
-};
-
/* Unified ethernet device probe, segmented per architecture and
* per bus interface. This drives the legacy devices only for now.
*/
if (base_addr == 1)
return;
- (void)(probe_list2(unit, m68k_probes, base_addr == 0) &&
- probe_list2(unit, isa_probes, base_addr == 0));
+ probe_list2(unit, isa_probes, base_addr == 0);
}
/* Statically configured drivers -- order matters here. */
{
int num;
-#ifdef CONFIG_SBNI
- for (num = 0; num < 8; ++num)
- sbni_probe(num);
-#endif
for (num = 0; num < 8; ++num)
ethif_probe2(num);
cops_probe(1);
cops_probe(2);
#endif
-#ifdef CONFIG_LTPC
- ltpc_probe();
-#endif
return 0;
}
projects / linux-2.6-microblaze.git / blobdiff