return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
}
-/*
- * On gen9, we need to allocate Display Data Buffer (DDB) portions to the
- * different active planes.
- */
-
-#define SKL_DDB_SIZE 896 /* in blocks */
-#define BXT_DDB_SIZE 512
+#define SKL_SAGV_BLOCK_TIME 30 /* µs */
/*
* Return the index of a plane in the SKL DDB and wm result arrays. Primary
}
}
+/*
+ * SAGV dynamically adjusts the system agent voltage and clock frequencies
+ * depending on power and performance requirements. The display engine access
+ * to system memory is blocked during the adjustment time. Because of the
+ * blocking time, having this enabled can cause full system hangs and/or pipe
+ * underruns if we don't meet all of the following requirements:
+ *
+ * - <= 1 pipe enabled
+ * - All planes can enable watermarks for latencies >= SAGV engine block time
+ * - We're not using an interlaced display configuration
+ */
+int
+skl_enable_sagv(struct drm_i915_private *dev_priv)
+{
+ int ret;
+
+ if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED ||
+ dev_priv->skl_sagv_status == I915_SKL_SAGV_ENABLED)
+ return 0;
+
+ DRM_DEBUG_KMS("Enabling the SAGV\n");
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+ ret = sandybridge_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL,
+ GEN9_SAGV_ENABLE);
+
+ /* We don't need to wait for the SAGV when enabling */
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ /*
+ * Some skl systems, pre-release machines in particular,
+ * don't actually have an SAGV.
+ */
+ if (ret == -ENXIO) {
+ DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED;
+ return 0;
+ } else if (ret < 0) {
+ DRM_ERROR("Failed to enable the SAGV\n");
+ return ret;
+ }
+
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_ENABLED;
+ return 0;
+}
+
+static int
+skl_do_sagv_disable(struct drm_i915_private *dev_priv)
+{
+ int ret;
+ uint32_t temp = GEN9_SAGV_DISABLE;
+
+ ret = sandybridge_pcode_read(dev_priv, GEN9_PCODE_SAGV_CONTROL,
+ &temp);
+ if (ret)
+ return ret;
+ else
+ return temp & GEN9_SAGV_IS_DISABLED;
+}
+
+int
+skl_disable_sagv(struct drm_i915_private *dev_priv)
+{
+ int ret, result;
+
+ if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED ||
+ dev_priv->skl_sagv_status == I915_SKL_SAGV_DISABLED)
+ return 0;
+
+ DRM_DEBUG_KMS("Disabling the SAGV\n");
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+ /* bspec says to keep retrying for at least 1 ms */
+ ret = wait_for(result = skl_do_sagv_disable(dev_priv), 1);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ if (ret == -ETIMEDOUT) {
+ DRM_ERROR("Request to disable SAGV timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * Some skl systems, pre-release machines in particular,
+ * don't actually have an SAGV.
+ */
+ if (result == -ENXIO) {
+ DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED;
+ return 0;
+ } else if (result < 0) {
+ DRM_ERROR("Failed to disable the SAGV\n");
+ return result;
+ }
+
+ dev_priv->skl_sagv_status = I915_SKL_SAGV_DISABLED;
+ return 0;
+}
+
+bool skl_can_enable_sagv(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
+ struct drm_crtc *crtc;
+ enum pipe pipe;
+ int level, plane;
+
+ /*
+ * SKL workaround: bspec recommends we disable the SAGV when we have
+ * more then one pipe enabled
+ *
+ * If there are no active CRTCs, no additional checks need be performed
+ */
+ if (hweight32(intel_state->active_crtcs) == 0)
+ return true;
+ else if (hweight32(intel_state->active_crtcs) > 1)
+ return false;
+
+ /* Since we're now guaranteed to only have one active CRTC... */
+ pipe = ffs(intel_state->active_crtcs) - 1;
+ crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+ if (crtc->state->mode.flags & DRM_MODE_FLAG_INTERLACE)
+ return false;
+
+ for_each_plane(dev_priv, pipe, plane) {
+ /* Skip this plane if it's not enabled */
+ if (intel_state->wm_results.plane[pipe][plane][0] == 0)
+ continue;
+
+ /* Find the highest enabled wm level for this plane */
+ for (level = ilk_wm_max_level(dev);
+ intel_state->wm_results.plane[pipe][plane][level] == 0; --level)
+ { }
+
+ /*
+ * If any of the planes on this pipe don't enable wm levels
+ * that incur memory latencies higher then 30µs we can't enable
+ * the SAGV
+ */
+ if (dev_priv->wm.skl_latency[level] < SKL_SAGV_BLOCK_TIME)
+ return false;
+ }
+
+ return true;
+}
+
static void
skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
const struct intel_crtc_state *cstate,
else
*num_active = hweight32(dev_priv->active_crtcs);
- if (IS_BROXTON(dev))
- ddb_size = BXT_DDB_SIZE;
- else
- ddb_size = SKL_DDB_SIZE;
+ ddb_size = INTEL_INFO(dev_priv)->ddb_size;
+ WARN_ON(ddb_size == 0);
ddb_size -= 4; /* 4 blocks for bypass path allocation */
total_data_rate += intel_cstate->wm.skl.plane_y_data_rate[id];
}
- WARN_ON(cstate->plane_mask && total_data_rate == 0);
-
return total_data_rate;
}
I915_WRITE(reg, 0);
}
-static void skl_write_wm_values(struct drm_i915_private *dev_priv,
- const struct skl_wm_values *new)
+void skl_write_plane_wm(struct intel_crtc *intel_crtc,
+ const struct skl_wm_values *wm,
+ int plane)
{
- struct drm_device *dev = &dev_priv->drm;
- struct intel_crtc *crtc;
-
- for_each_intel_crtc(dev, crtc) {
- int i, level, max_level = ilk_wm_max_level(dev);
- enum pipe pipe = crtc->pipe;
-
- if ((new->dirty_pipes & drm_crtc_mask(&crtc->base)) == 0)
- continue;
- if (!crtc->active)
- continue;
-
- I915_WRITE(PIPE_WM_LINETIME(pipe), new->wm_linetime[pipe]);
-
- for (level = 0; level <= max_level; level++) {
- for (i = 0; i < intel_num_planes(crtc); i++)
- I915_WRITE(PLANE_WM(pipe, i, level),
- new->plane[pipe][i][level]);
- I915_WRITE(CUR_WM(pipe, level),
- new->plane[pipe][PLANE_CURSOR][level]);
- }
- for (i = 0; i < intel_num_planes(crtc); i++)
- I915_WRITE(PLANE_WM_TRANS(pipe, i),
- new->plane_trans[pipe][i]);
- I915_WRITE(CUR_WM_TRANS(pipe),
- new->plane_trans[pipe][PLANE_CURSOR]);
-
- for (i = 0; i < intel_num_planes(crtc); i++) {
- skl_ddb_entry_write(dev_priv,
- PLANE_BUF_CFG(pipe, i),
- &new->ddb.plane[pipe][i]);
- skl_ddb_entry_write(dev_priv,
- PLANE_NV12_BUF_CFG(pipe, i),
- &new->ddb.y_plane[pipe][i]);
- }
+ struct drm_crtc *crtc = &intel_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ int level, max_level = ilk_wm_max_level(dev);
+ enum pipe pipe = intel_crtc->pipe;
- skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
- &new->ddb.plane[pipe][PLANE_CURSOR]);
+ for (level = 0; level <= max_level; level++) {
+ I915_WRITE(PLANE_WM(pipe, plane, level),
+ wm->plane[pipe][plane][level]);
}
-}
+ I915_WRITE(PLANE_WM_TRANS(pipe, plane), wm->plane_trans[pipe][plane]);
-/*
- * When setting up a new DDB allocation arrangement, we need to correctly
- * sequence the times at which the new allocations for the pipes are taken into
- * account or we'll have pipes fetching from space previously allocated to
- * another pipe.
- *
- * Roughly the sequence looks like:
- * 1. re-allocate the pipe(s) with the allocation being reduced and not
- * overlapping with a previous light-up pipe (another way to put it is:
- * pipes with their new allocation strickly included into their old ones).
- * 2. re-allocate the other pipes that get their allocation reduced
- * 3. allocate the pipes having their allocation increased
- *
- * Steps 1. and 2. are here to take care of the following case:
- * - Initially DDB looks like this:
- * | B | C |
- * - enable pipe A.
- * - pipe B has a reduced DDB allocation that overlaps with the old pipe C
- * allocation
- * | A | B | C |
- *
- * We need to sequence the re-allocation: C, B, A (and not B, C, A).
- */
+ skl_ddb_entry_write(dev_priv, PLANE_BUF_CFG(pipe, plane),
+ &wm->ddb.plane[pipe][plane]);
+ skl_ddb_entry_write(dev_priv, PLANE_NV12_BUF_CFG(pipe, plane),
+ &wm->ddb.y_plane[pipe][plane]);
+}
-static void
-skl_wm_flush_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, int pass)
+void skl_write_cursor_wm(struct intel_crtc *intel_crtc,
+ const struct skl_wm_values *wm)
{
- int plane;
-
- DRM_DEBUG_KMS("flush pipe %c (pass %d)\n", pipe_name(pipe), pass);
+ struct drm_crtc *crtc = &intel_crtc->base;
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ int level, max_level = ilk_wm_max_level(dev);
+ enum pipe pipe = intel_crtc->pipe;
- for_each_plane(dev_priv, pipe, plane) {
- I915_WRITE(PLANE_SURF(pipe, plane),
- I915_READ(PLANE_SURF(pipe, plane)));
+ for (level = 0; level <= max_level; level++) {
+ I915_WRITE(CUR_WM(pipe, level),
+ wm->plane[pipe][PLANE_CURSOR][level]);
}
- I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
+ I915_WRITE(CUR_WM_TRANS(pipe), wm->plane_trans[pipe][PLANE_CURSOR]);
+
+ skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
+ &wm->ddb.plane[pipe][PLANE_CURSOR]);
}
-static bool
-skl_ddb_allocation_included(const struct skl_ddb_allocation *old,
- const struct skl_ddb_allocation *new,
- enum pipe pipe)
+bool skl_ddb_allocation_equals(const struct skl_ddb_allocation *old,
+ const struct skl_ddb_allocation *new,
+ enum pipe pipe)
{
- uint16_t old_size, new_size;
-
- old_size = skl_ddb_entry_size(&old->pipe[pipe]);
- new_size = skl_ddb_entry_size(&new->pipe[pipe]);
-
- return old_size != new_size &&
- new->pipe[pipe].start >= old->pipe[pipe].start &&
- new->pipe[pipe].end <= old->pipe[pipe].end;
+ return new->pipe[pipe].start == old->pipe[pipe].start &&
+ new->pipe[pipe].end == old->pipe[pipe].end;
}
-static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
- struct skl_wm_values *new_values)
+static inline bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a,
+ const struct skl_ddb_entry *b)
{
- struct drm_device *dev = &dev_priv->drm;
- struct skl_ddb_allocation *cur_ddb, *new_ddb;
- bool reallocated[I915_MAX_PIPES] = {};
- struct intel_crtc *crtc;
- enum pipe pipe;
-
- new_ddb = &new_values->ddb;
- cur_ddb = &dev_priv->wm.skl_hw.ddb;
-
- /*
- * First pass: flush the pipes with the new allocation contained into
- * the old space.
- *
- * We'll wait for the vblank on those pipes to ensure we can safely
- * re-allocate the freed space without this pipe fetching from it.
- */
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- pipe = crtc->pipe;
-
- if (!skl_ddb_allocation_included(cur_ddb, new_ddb, pipe))
- continue;
-
- skl_wm_flush_pipe(dev_priv, pipe, 1);
- intel_wait_for_vblank(dev, pipe);
-
- reallocated[pipe] = true;
- }
-
+ return a->start < b->end && b->start < a->end;
+}
- /*
- * Second pass: flush the pipes that are having their allocation
- * reduced, but overlapping with a previous allocation.
- *
- * Here as well we need to wait for the vblank to make sure the freed
- * space is not used anymore.
- */
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
+bool skl_ddb_allocation_overlaps(struct drm_atomic_state *state,
+ const struct skl_ddb_allocation *old,
+ const struct skl_ddb_allocation *new,
+ enum pipe pipe)
+{
+ struct drm_device *dev = state->dev;
+ struct intel_crtc *intel_crtc;
+ enum pipe otherp;
- pipe = crtc->pipe;
+ for_each_intel_crtc(dev, intel_crtc) {
+ otherp = intel_crtc->pipe;
- if (reallocated[pipe])
+ if (otherp == pipe)
continue;
- if (skl_ddb_entry_size(&new_ddb->pipe[pipe]) <
- skl_ddb_entry_size(&cur_ddb->pipe[pipe])) {
- skl_wm_flush_pipe(dev_priv, pipe, 2);
- intel_wait_for_vblank(dev, pipe);
- reallocated[pipe] = true;
- }
+ if (skl_ddb_entries_overlap(&new->pipe[pipe],
+ &old->pipe[otherp]))
+ return true;
}
- /*
- * Third pass: flush the pipes that got more space allocated.
- *
- * We don't need to actively wait for the update here, next vblank
- * will just get more DDB space with the correct WM values.
- */
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- pipe = crtc->pipe;
-
- /*
- * At this point, only the pipes more space than before are
- * left to re-allocate.
- */
- if (reallocated[pipe])
- continue;
-
- skl_wm_flush_pipe(dev_priv, pipe, 3);
- }
+ return false;
}
static int skl_update_pipe_wm(struct drm_crtc_state *cstate,
ret = skl_allocate_pipe_ddb(cstate, ddb);
if (ret)
return ret;
+
+ ret = drm_atomic_add_affected_planes(state, &intel_crtc->base);
+ if (ret)
+ return ret;
}
return 0;
}
+static void
+skl_copy_wm_for_pipe(struct skl_wm_values *dst,
+ struct skl_wm_values *src,
+ enum pipe pipe)
+{
+ dst->wm_linetime[pipe] = src->wm_linetime[pipe];
+ memcpy(dst->plane[pipe], src->plane[pipe],
+ sizeof(dst->plane[pipe]));
+ memcpy(dst->plane_trans[pipe], src->plane_trans[pipe],
+ sizeof(dst->plane_trans[pipe]));
+
+ dst->ddb.pipe[pipe] = src->ddb.pipe[pipe];
+ memcpy(dst->ddb.y_plane[pipe], src->ddb.y_plane[pipe],
+ sizeof(dst->ddb.y_plane[pipe]));
+ memcpy(dst->ddb.plane[pipe], src->ddb.plane[pipe],
+ sizeof(dst->ddb.plane[pipe]));
+}
+
static int
skl_compute_wm(struct drm_atomic_state *state)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct skl_wm_values *results = &dev_priv->wm.skl_results;
+ struct skl_wm_values *hw_vals = &dev_priv->wm.skl_hw;
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal;
+ enum pipe pipe = intel_crtc->pipe;
if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0)
return;
mutex_lock(&dev_priv->wm.wm_mutex);
- skl_write_wm_values(dev_priv, results);
- skl_flush_wm_values(dev_priv, results);
+ /*
+ * If this pipe isn't active already, we're going to be enabling it
+ * very soon. Since it's safe to update a pipe's ddb allocation while
+ * the pipe's shut off, just do so here. Already active pipes will have
+ * their watermarks updated once we update their planes.
+ */
+ if (crtc->state->active_changed) {
+ int plane;
- /* store the new configuration */
- dev_priv->wm.skl_hw = *results;
+ for (plane = 0; plane < intel_num_planes(intel_crtc); plane++)
+ skl_write_plane_wm(intel_crtc, results, plane);
+
+ skl_write_cursor_wm(intel_crtc, results);
+ }
+
+ skl_copy_wm_for_pipe(hw_vals, results, pipe);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE);
- switch (INTEL_INFO(dev_priv)->eu_total) {
+ switch (INTEL_INFO(dev_priv)->sseu.eu_total) {
case 8:
/* (2 * 4) config */
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS4EU_FUSE_SHIFT);
if (IS_IRONLAKE_M(dev_priv)) {
ironlake_enable_drps(dev_priv);
- mutex_lock(&dev_priv->drm.struct_mutex);
intel_init_emon(dev_priv);
- mutex_unlock(&dev_priv->drm.struct_mutex);
} else if (INTEL_INFO(dev_priv)->gen >= 6) {
/*
* PCU communication is slow and this doesn't need to be
}
}
+static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv)
+{
+ uint32_t flags =
+ I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
+
+ switch (flags) {
+ case GEN6_PCODE_SUCCESS:
+ return 0;
+ case GEN6_PCODE_UNIMPLEMENTED_CMD:
+ case GEN6_PCODE_ILLEGAL_CMD:
+ return -ENXIO;
+ case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ return -EOVERFLOW;
+ case GEN6_PCODE_TIMEOUT:
+ return -ETIMEDOUT;
+ default:
+ MISSING_CASE(flags)
+ return 0;
+ }
+}
+
+static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv)
+{
+ uint32_t flags =
+ I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
+
+ switch (flags) {
+ case GEN6_PCODE_SUCCESS:
+ return 0;
+ case GEN6_PCODE_ILLEGAL_CMD:
+ return -ENXIO;
+ case GEN7_PCODE_TIMEOUT:
+ return -ETIMEDOUT;
+ case GEN7_PCODE_ILLEGAL_DATA:
+ return -EINVAL;
+ case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
+ return -EOVERFLOW;
+ default:
+ MISSING_CASE(flags);
+ return 0;
+ }
+}
+
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
{
+ int status;
+
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
*val = I915_READ_FW(GEN6_PCODE_DATA);
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
+ if (INTEL_GEN(dev_priv) > 6)
+ status = gen7_check_mailbox_status(dev_priv);
+ else
+ status = gen6_check_mailbox_status(dev_priv);
+
+ if (status) {
+ DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed: %d\n",
+ status);
+ return status;
+ }
+
return 0;
}
int sandybridge_pcode_write(struct drm_i915_private *dev_priv,
- u32 mbox, u32 val)
+ u32 mbox, u32 val)
{
+ int status;
+
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
+ if (INTEL_GEN(dev_priv) > 6)
+ status = gen7_check_mailbox_status(dev_priv);
+ else
+ status = gen6_check_mailbox_status(dev_priv);
+
+ if (status) {
+ DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed: %d\n",
+ status);
+ return status;
+ }
+
return 0;
}
projects / linux-2.6-microblaze.git / blobdiff