#include "intel_audio.h"
#include "intel_connector.h"
#include "intel_ddi.h"
-#include "intel_display_debugfs.h"
#include "intel_display_types.h"
#include "intel_dp.h"
#include "intel_dp_link_training.h"
intel_crtc_has_type(pipe_config,
INTEL_OUTPUT_DP_MST));
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
/*
* There are four kinds of DP registers:
*
return test_result;
}
+static u8 intel_dp_prepare_phytest(struct intel_dp *intel_dp)
+{
+ struct drm_dp_phy_test_params *data =
+ &intel_dp->compliance.test_data.phytest;
+
+ if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) {
+ DRM_DEBUG_KMS("DP Phy Test pattern AUX read failure\n");
+ return DP_TEST_NAK;
+ }
+
+ /*
+ * link_mst is set to false to avoid executing mst related code
+ * during compliance testing.
+ */
+ intel_dp->link_mst = false;
+
+ return DP_TEST_ACK;
+}
+
+static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv =
+ to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_dp_phy_test_params *data =
+ &intel_dp->compliance.test_data.phytest;
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ enum pipe pipe = crtc->pipe;
+ u32 pattern_val;
+
+ switch (data->phy_pattern) {
+ case DP_PHY_TEST_PATTERN_NONE:
+ DRM_DEBUG_KMS("Disable Phy Test Pattern\n");
+ intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
+ break;
+ case DP_PHY_TEST_PATTERN_D10_2:
+ DRM_DEBUG_KMS("Set D10.2 Phy Test Pattern\n");
+ intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+ DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2);
+ break;
+ case DP_PHY_TEST_PATTERN_ERROR_COUNT:
+ DRM_DEBUG_KMS("Set Error Count Phy Test Pattern\n");
+ intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+ DDI_DP_COMP_CTL_ENABLE |
+ DDI_DP_COMP_CTL_SCRAMBLED_0);
+ break;
+ case DP_PHY_TEST_PATTERN_PRBS7:
+ DRM_DEBUG_KMS("Set PRBS7 Phy Test Pattern\n");
+ intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+ DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7);
+ break;
+ case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
+ /*
+ * FIXME: Ideally pattern should come from DPCD 0x250. As
+ * current firmware of DPR-100 could not set it, so hardcoding
+ * now for complaince test.
+ */
+ DRM_DEBUG_KMS("Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n");
+ pattern_val = 0x3e0f83e0;
+ intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val);
+ pattern_val = 0x0f83e0f8;
+ intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val);
+ pattern_val = 0x0000f83e;
+ intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val);
+ intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+ DDI_DP_COMP_CTL_ENABLE |
+ DDI_DP_COMP_CTL_CUSTOM80);
+ break;
+ case DP_PHY_TEST_PATTERN_CP2520:
+ /*
+ * FIXME: Ideally pattern should come from DPCD 0x24A. As
+ * current firmware of DPR-100 could not set it, so hardcoding
+ * now for complaince test.
+ */
+ DRM_DEBUG_KMS("Set HBR2 compliance Phy Test Pattern\n");
+ pattern_val = 0xFB;
+ intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
+ DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
+ pattern_val);
+ break;
+ default:
+ WARN(1, "Invalid Phy Test Pattern\n");
+ }
+}
+
+static void
+intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ enum pipe pipe = crtc->pipe;
+ u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
+
+ trans_ddi_func_ctl_value = intel_de_read(dev_priv,
+ TRANS_DDI_FUNC_CTL(pipe));
+ trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
+ dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
+
+ trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE |
+ TGL_TRANS_DDI_PORT_MASK);
+ trans_conf_value &= ~PIPECONF_ENABLE;
+ dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE;
+
+ intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
+ intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
+ trans_ddi_func_ctl_value);
+ intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
+}
+
+static void
+intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp, uint8_t lane_cnt)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ enum port port = intel_dig_port->base.port;
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ enum pipe pipe = crtc->pipe;
+ u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
+
+ trans_ddi_func_ctl_value = intel_de_read(dev_priv,
+ TRANS_DDI_FUNC_CTL(pipe));
+ trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
+ dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
+
+ trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE |
+ TGL_TRANS_DDI_SELECT_PORT(port);
+ trans_conf_value |= PIPECONF_ENABLE;
+ dp_tp_ctl_value |= DP_TP_CTL_ENABLE;
+
+ intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
+ intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
+ intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
+ trans_ddi_func_ctl_value);
+}
+
+void intel_dp_process_phy_request(struct intel_dp *intel_dp)
+{
+ struct drm_dp_phy_test_params *data =
+ &intel_dp->compliance.test_data.phytest;
+ u8 link_status[DP_LINK_STATUS_SIZE];
+
+ if (!intel_dp_get_link_status(intel_dp, link_status)) {
+ DRM_DEBUG_KMS("failed to get link status\n");
+ return;
+ }
+
+ /* retrieve vswing & pre-emphasis setting */
+ intel_dp_get_adjust_train(intel_dp, link_status);
+
+ intel_dp_autotest_phy_ddi_disable(intel_dp);
+
+ intel_dp_set_signal_levels(intel_dp);
+
+ intel_dp_phy_pattern_update(intel_dp);
+
+ intel_dp_autotest_phy_ddi_enable(intel_dp, data->num_lanes);
+
+ drm_dp_set_phy_test_pattern(&intel_dp->aux, data,
+ link_status[DP_DPCD_REV]);
+}
+
static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)
{
- u8 test_result = DP_TEST_NAK;
+ u8 test_result;
+
+ test_result = intel_dp_prepare_phytest(intel_dp);
+ if (test_result != DP_TEST_ACK)
+ DRM_ERROR("Phy test preparation failed\n");
+
+ intel_dp_process_phy_request(intel_dp);
+
return test_result;
}
if (ret)
return ret;
- intel_connector_debugfs_add(connector);
-
drm_dbg_kms(&i915->drm, "registering %s bus for %s\n",
intel_dp->aux.name, connector->kdev->kobj.name);
intel_dig_port->dp.output_reg = output_reg;
intel_dig_port->max_lanes = 4;
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
intel_encoder->type = INTEL_OUTPUT_DP;
intel_encoder->power_domain = intel_port_to_power_domain(port);
projects / linux-2.6-microblaze.git / blobdiff