return true;
}
+ if (link->connector_signal == SIGNAL_TYPE_EDP)
+ link->dc->hwss.edp_wait_for_hpd_ready(link, true);
+
/* todo: may need to lock gpio access */
hpd_pin = get_hpd_gpio(link->ctx->dc_bios, link->link_id, link->ctx->gpio_service);
if (hpd_pin == NULL)
{
enum gpio_result gpio_result;
uint32_t clock_pin = 0;
-
+ uint8_t retry = 0;
struct ddc *ddc;
enum connector_id connector_id =
return present;
}
- /* Read GPIO: DP sink is present if both clock and data pins are zero */
- /* [anaumov] in DAL2, there was no check for GPIO failure */
-
- gpio_result = dal_gpio_get_value(ddc->pin_clock, &clock_pin);
- ASSERT(gpio_result == GPIO_RESULT_OK);
+ /*
+ * Read GPIO: DP sink is present if both clock and data pins are zero
+ *
+ * [W/A] plug-unplug DP cable, sometimes customer board has
+ * one short pulse on clk_pin(1V, < 1ms). DP will be config to HDMI/DVI
+ * then monitor can't br light up. Add retry 3 times
+ * But in real passive dongle, it need additional 3ms to detect
+ */
+ do {
+ gpio_result = dal_gpio_get_value(ddc->pin_clock, &clock_pin);
+ ASSERT(gpio_result == GPIO_RESULT_OK);
+ if (clock_pin)
+ udelay(1000);
+ else
+ break;
+ } while (retry++ < 3);
present = (gpio_result == GPIO_RESULT_OK) && !clock_pin;
if (memcmp(&link->dpcd_caps, &prev_dpcd_caps, sizeof(struct dpcd_caps)))
same_dpcd = false;
}
- /* Active dongle downstream unplug */
+ /* Active dongle plug in without display or downstream unplug*/
if (link->type == dc_connection_active_dongle
&& link->dpcd_caps.sink_count.
bits.SINK_COUNT == 0) {
- if (prev_sink != NULL)
+ if (prev_sink != NULL) {
+ /* Downstream unplug */
dc_sink_release(prev_sink);
+ } else {
+ /* Empty dongle plug in */
+ for (i = 0; i < LINK_TRAINING_MAX_VERIFY_RETRY; i++) {
+ int fail_count = 0;
+
+ dp_verify_link_cap(link,
+ &link->reported_link_cap,
+ &fail_count);
+
+ if (fail_count == 0)
+ break;
+ }
+ }
return true;
}
{
struct dc *core_dc = pipe_ctx->stream->ctx->dc;
+ core_dc->hwss.blank_stream(pipe_ctx);
+
if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
deallocate_mst_payload(pipe_ctx);
- core_dc->hwss.blank_stream(pipe_ctx);
-
core_dc->hwss.disable_stream(pipe_ctx, option);
disable_link(pipe_ctx->stream->sink->link, pipe_ctx->stream->signal);