#define BTUSB_BROKEN_ISOC 0x20
#define BTUSB_WRONG_SCO_MTU 0x40
#define BTUSB_ATH3012 0x80
-#define BTUSB_INTEL 0x100
+#define BTUSB_INTEL_COMBINED 0x100
#define BTUSB_INTEL_BOOT 0x200
#define BTUSB_BCM_PATCHRAM 0x400
#define BTUSB_MARVELL 0x800
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
- { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
- { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
+ { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED },
+ { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW |
BTUSB_WIDEBAND_SPEECH },
- { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL |
+ { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW |
BTUSB_WIDEBAND_SPEECH |
return 0;
}
-static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
- struct intel_version *ver)
-{
- const struct firmware *fw;
- char fwname[64];
- int ret;
-
- snprintf(fwname, sizeof(fwname),
- "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
- ver->hw_platform, ver->hw_variant, ver->hw_revision,
- ver->fw_variant, ver->fw_revision, ver->fw_build_num,
- ver->fw_build_ww, ver->fw_build_yy);
-
- ret = request_firmware(&fw, fwname, &hdev->dev);
- if (ret < 0) {
- if (ret == -EINVAL) {
- bt_dev_err(hdev, "Intel firmware file request failed (%d)",
- ret);
- return NULL;
- }
-
- bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
- fwname, ret);
-
- /* If the correct firmware patch file is not found, use the
- * default firmware patch file instead
- */
- snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
- ver->hw_platform, ver->hw_variant);
- if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
- bt_dev_err(hdev, "failed to open default fw file: %s",
- fwname);
- return NULL;
- }
- }
-
- bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
-
- return fw;
-}
-
-static int btusb_setup_intel_patching(struct hci_dev *hdev,
- const struct firmware *fw,
- const u8 **fw_ptr, int *disable_patch)
-{
- struct sk_buff *skb;
- struct hci_command_hdr *cmd;
- const u8 *cmd_param;
- struct hci_event_hdr *evt = NULL;
- const u8 *evt_param = NULL;
- int remain = fw->size - (*fw_ptr - fw->data);
-
- /* The first byte indicates the types of the patch command or event.
- * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
- * in the current firmware buffer doesn't start with 0x01 or
- * the size of remain buffer is smaller than HCI command header,
- * the firmware file is corrupted and it should stop the patching
- * process.
- */
- if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
- bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
- return -EINVAL;
- }
- (*fw_ptr)++;
- remain--;
-
- cmd = (struct hci_command_hdr *)(*fw_ptr);
- *fw_ptr += sizeof(*cmd);
- remain -= sizeof(*cmd);
-
- /* Ensure that the remain firmware data is long enough than the length
- * of command parameter. If not, the firmware file is corrupted.
- */
- if (remain < cmd->plen) {
- bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
- return -EFAULT;
- }
-
- /* If there is a command that loads a patch in the firmware
- * file, then enable the patch upon success, otherwise just
- * disable the manufacturer mode, for example patch activation
- * is not required when the default firmware patch file is used
- * because there are no patch data to load.
- */
- if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
- *disable_patch = 0;
-
- cmd_param = *fw_ptr;
- *fw_ptr += cmd->plen;
- remain -= cmd->plen;
-
- /* This reads the expected events when the above command is sent to the
- * device. Some vendor commands expects more than one events, for
- * example command status event followed by vendor specific event.
- * For this case, it only keeps the last expected event. so the command
- * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
- * last expected event.
- */
- while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
- (*fw_ptr)++;
- remain--;
-
- evt = (struct hci_event_hdr *)(*fw_ptr);
- *fw_ptr += sizeof(*evt);
- remain -= sizeof(*evt);
-
- if (remain < evt->plen) {
- bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
- return -EFAULT;
- }
-
- evt_param = *fw_ptr;
- *fw_ptr += evt->plen;
- remain -= evt->plen;
- }
-
- /* Every HCI commands in the firmware file has its correspond event.
- * If event is not found or remain is smaller than zero, the firmware
- * file is corrupted.
- */
- if (!evt || !evt_param || remain < 0) {
- bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
- return -EFAULT;
- }
-
- skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
- cmd_param, evt->evt, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
- cmd->opcode, PTR_ERR(skb));
- return PTR_ERR(skb);
- }
-
- /* It ensures that the returned event matches the event data read from
- * the firmware file. At fist, it checks the length and then
- * the contents of the event.
- */
- if (skb->len != evt->plen) {
- bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
- le16_to_cpu(cmd->opcode));
- kfree_skb(skb);
- return -EFAULT;
- }
-
- if (memcmp(skb->data, evt_param, evt->plen)) {
- bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
- le16_to_cpu(cmd->opcode));
- kfree_skb(skb);
- return -EFAULT;
- }
- kfree_skb(skb);
-
- return 0;
-}
-
-static int btusb_setup_intel(struct hci_dev *hdev)
-{
- struct sk_buff *skb;
- const struct firmware *fw;
- const u8 *fw_ptr;
- int disable_patch, err;
- struct intel_version ver;
-
- BT_DBG("%s", hdev->name);
-
- /* The controller has a bug with the first HCI command sent to it
- * returning number of completed commands as zero. This would stall the
- * command processing in the Bluetooth core.
- *
- * As a workaround, send HCI Reset command first which will reset the
- * number of completed commands and allow normal command processing
- * from now on.
- */
- skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- bt_dev_err(hdev, "sending initial HCI reset command failed (%ld)",
- PTR_ERR(skb));
- return PTR_ERR(skb);
- }
- kfree_skb(skb);
-
- /* Read Intel specific controller version first to allow selection of
- * which firmware file to load.
- *
- * The returned information are hardware variant and revision plus
- * firmware variant, revision and build number.
- */
- err = btintel_read_version(hdev, &ver);
- if (err)
- return err;
-
- bt_dev_info(hdev, "read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
- ver.hw_platform, ver.hw_variant, ver.hw_revision,
- ver.fw_variant, ver.fw_revision, ver.fw_build_num,
- ver.fw_build_ww, ver.fw_build_yy, ver.fw_patch_num);
-
- /* fw_patch_num indicates the version of patch the device currently
- * have. If there is no patch data in the device, it is always 0x00.
- * So, if it is other than 0x00, no need to patch the device again.
- */
- if (ver.fw_patch_num) {
- bt_dev_info(hdev, "Intel device is already patched. "
- "patch num: %02x", ver.fw_patch_num);
- goto complete;
- }
-
- /* Opens the firmware patch file based on the firmware version read
- * from the controller. If it fails to open the matching firmware
- * patch file, it tries to open the default firmware patch file.
- * If no patch file is found, allow the device to operate without
- * a patch.
- */
- fw = btusb_setup_intel_get_fw(hdev, &ver);
- if (!fw)
- goto complete;
- fw_ptr = fw->data;
-
- /* Enable the manufacturer mode of the controller.
- * Only while this mode is enabled, the driver can download the
- * firmware patch data and configuration parameters.
- */
- err = btintel_enter_mfg(hdev);
- if (err) {
- release_firmware(fw);
- return err;
- }
-
- disable_patch = 1;
-
- /* The firmware data file consists of list of Intel specific HCI
- * commands and its expected events. The first byte indicates the
- * type of the message, either HCI command or HCI event.
- *
- * It reads the command and its expected event from the firmware file,
- * and send to the controller. Once __hci_cmd_sync_ev() returns,
- * the returned event is compared with the event read from the firmware
- * file and it will continue until all the messages are downloaded to
- * the controller.
- *
- * Once the firmware patching is completed successfully,
- * the manufacturer mode is disabled with reset and activating the
- * downloaded patch.
- *
- * If the firmware patching fails, the manufacturer mode is
- * disabled with reset and deactivating the patch.
- *
- * If the default patch file is used, no reset is done when disabling
- * the manufacturer.
- */
- while (fw->size > fw_ptr - fw->data) {
- int ret;
-
- ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
- &disable_patch);
- if (ret < 0)
- goto exit_mfg_deactivate;
- }
-
- release_firmware(fw);
-
- if (disable_patch)
- goto exit_mfg_disable;
-
- /* Patching completed successfully and disable the manufacturer mode
- * with reset and activate the downloaded firmware patches.
- */
- err = btintel_exit_mfg(hdev, true, true);
- if (err)
- return err;
-
- /* Need build number for downloaded fw patches in
- * every power-on boot
- */
- err = btintel_read_version(hdev, &ver);
- if (err)
- return err;
- bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated",
- ver.fw_patch_num);
-
- goto complete;
-
-exit_mfg_disable:
- /* Disable the manufacturer mode without reset */
- err = btintel_exit_mfg(hdev, false, false);
- if (err)
- return err;
-
- bt_dev_info(hdev, "Intel firmware patch completed");
-
- goto complete;
-
-exit_mfg_deactivate:
- release_firmware(fw);
-
- /* Patching failed. Disable the manufacturer mode with reset and
- * deactivate the downloaded firmware patches.
- */
- err = btintel_exit_mfg(hdev, true, false);
- if (err)
- return err;
-
- bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
-
-complete:
- /* Set the event mask for Intel specific vendor events. This enables
- * a few extra events that are useful during general operation.
- */
- btintel_set_event_mask_mfg(hdev, false);
-
- btintel_check_bdaddr(hdev);
- return 0;
-}
-
static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
{
struct sk_buff *skb;
return 0;
}
-static int btusb_shutdown_intel(struct hci_dev *hdev)
-{
- struct sk_buff *skb;
- long ret;
-
- /* In the shutdown sequence where Bluetooth is turned off followed
- * by WiFi being turned off, turning WiFi back on causes issue with
- * the RF calibration.
- *
- * To ensure that any RF activity has been stopped, issue HCI Reset
- * command to clear all ongoing activity including advertising,
- * scanning etc.
- */
- skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- ret = PTR_ERR(skb);
- bt_dev_err(hdev, "HCI reset during shutdown failed");
- return ret;
- }
- kfree_skb(skb);
-
- /* Some platforms have an issue with BT LED when the interface is
- * down or BT radio is turned off, which takes 5 seconds to BT LED
- * goes off. This command turns off the BT LED immediately.
- */
- skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- ret = PTR_ERR(skb);
- bt_dev_err(hdev, "turning off Intel device LED failed");
- return ret;
- }
- kfree_skb(skb);
-
- return 0;
-}
static int btusb_shutdown_intel_new(struct hci_dev *hdev)
{
data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
}
- if (id->driver_info & BTUSB_INTEL) {
- hdev->manufacturer = 2;
- hdev->setup = btusb_setup_intel;
- hdev->shutdown = btusb_shutdown_intel;
- hdev->set_diag = btintel_set_diag_mfg;
- hdev->set_bdaddr = btintel_set_bdaddr;
+ /* Combined Intel Device setup to support multiple setup routine */
+ if (id->driver_info & BTUSB_INTEL_COMBINED) {
+ err = btintel_configure_setup(hdev);
+ if (err)
+ goto out_free_dev;
+
+ /* Transport specific configuration */
hdev->cmd_timeout = btusb_intel_cmd_timeout;
+
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
projects / linux-2.6-microblaze.git / blobdiff