* is issued to the device. However, if the controller clock is 133MHz,
* the following tables must be used.
*/
-static struct pdc2027x_pio_timing {
+static const struct pdc2027x_pio_timing {
u8 value0, value1, value2;
} pdc2027x_pio_timing_tbl[] = {
{ 0xfb, 0x2b, 0xac }, /* PIO mode 0 */
{ 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
};
-static struct pdc2027x_mdma_timing {
+static const struct pdc2027x_mdma_timing {
u8 value0, value1;
} pdc2027x_mdma_timing_tbl[] = {
{ 0xdf, 0x5f }, /* MDMA mode 0 */
{ 0x69, 0x25 }, /* MDMA mode 2 */
};
-static struct pdc2027x_udma_timing {
+static const struct pdc2027x_udma_timing {
u8 value0, value1, value2;
} pdc2027x_udma_timing_tbl[] = {
{ 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
* @host: target ATA host
* @board_idx: board identifier
*/
-static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
+static void pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
{
long pll_clock;
/* Adjust PLL control register */
pdc_adjust_pll(host, pll_clock, board_idx);
-
- return 0;
}
/**
//pci_enable_intx(pdev);
/* initialize adapter */
- if (pdc_hardware_init(host, board_idx) != 0)
- return -EIO;
+ pdc_hardware_init(host, board_idx);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
else
board_idx = PDC_UDMA_133;
- if (pdc_hardware_init(host, board_idx))
- return -EIO;
+ pdc_hardware_init(host, board_idx);
ata_host_resume(host);
return 0;