module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
-static int ahci_enable_alpm(struct ata_port *ap,
- enum link_pm policy);
-static void ahci_disable_alpm(struct ata_port *ap);
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ unsigned hints);
static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
size_t size);
static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
ahci_read_em_buffer, ahci_store_em_buffer);
-static struct device_attribute *ahci_shost_attrs[] = {
+struct device_attribute *ahci_shost_attrs[] = {
&dev_attr_link_power_management_policy,
&dev_attr_em_message_type,
&dev_attr_em_message,
&dev_attr_em_buffer,
NULL
};
+EXPORT_SYMBOL_GPL(ahci_shost_attrs);
-static struct device_attribute *ahci_sdev_attrs[] = {
+struct device_attribute *ahci_sdev_attrs[] = {
&dev_attr_sw_activity,
&dev_attr_unload_heads,
NULL
};
-
-struct scsi_host_template ahci_sht = {
- ATA_NCQ_SHT("ahci"),
- .can_queue = AHCI_MAX_CMDS - 1,
- .sg_tablesize = AHCI_MAX_SG,
- .dma_boundary = AHCI_DMA_BOUNDARY,
- .shost_attrs = ahci_shost_attrs,
- .sdev_attrs = ahci_sdev_attrs,
-};
-EXPORT_SYMBOL_GPL(ahci_sht);
+EXPORT_SYMBOL_GPL(ahci_sdev_attrs);
struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,
.pmp_attach = ahci_pmp_attach,
.pmp_detach = ahci_pmp_detach,
- .enable_pm = ahci_enable_alpm,
- .disable_pm = ahci_disable_alpm,
+ .set_lpm = ahci_set_lpm,
.em_show = ahci_led_show,
.em_store = ahci_led_store,
.sw_activity_show = ahci_activity_show,
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
}
-static void ahci_disable_alpm(struct ata_port *ap)
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ unsigned int hints)
{
+ struct ata_port *ap = link->ap;
struct ahci_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd;
struct ahci_port_priv *pp = ap->private_data;
-
- /* IPM bits should be disabled by libata-core */
- /* get the existing command bits */
- cmd = readl(port_mmio + PORT_CMD);
-
- /* disable ALPM and ASP */
- cmd &= ~PORT_CMD_ASP;
- cmd &= ~PORT_CMD_ALPE;
-
- /* force the interface back to active */
- cmd |= PORT_CMD_ICC_ACTIVE;
-
- /* write out new cmd value */
- writel(cmd, port_mmio + PORT_CMD);
- cmd = readl(port_mmio + PORT_CMD);
-
- /* wait 10ms to be sure we've come out of any low power state */
- msleep(10);
-
- /* clear out any PhyRdy stuff from interrupt status */
- writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
-
- /* go ahead and clean out PhyRdy Change from Serror too */
- ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-
- /*
- * Clear flag to indicate that we should ignore all PhyRdy
- * state changes
- */
- hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
-
- /*
- * Enable interrupts on Phy Ready.
- */
- pp->intr_mask |= PORT_IRQ_PHYRDY;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
- /*
- * don't change the link pm policy - we can be called
- * just to turn of link pm temporarily
- */
-}
-
-static int ahci_enable_alpm(struct ata_port *ap,
- enum link_pm policy)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd;
- struct ahci_port_priv *pp = ap->private_data;
- u32 asp;
- /* Make sure the host is capable of link power management */
- if (!(hpriv->cap & HOST_CAP_ALPM))
- return -EINVAL;
-
- switch (policy) {
- case MAX_PERFORMANCE:
- case NOT_AVAILABLE:
+ if (policy != ATA_LPM_MAX_POWER) {
/*
- * if we came here with NOT_AVAILABLE,
- * it just means this is the first time we
- * have tried to enable - default to max performance,
- * and let the user go to lower power modes on request.
+ * Disable interrupts on Phy Ready. This keeps us from
+ * getting woken up due to spurious phy ready
+ * interrupts.
*/
- ahci_disable_alpm(ap);
- return 0;
- case MIN_POWER:
- /* configure HBA to enter SLUMBER */
- asp = PORT_CMD_ASP;
- break;
- case MEDIUM_POWER:
- /* configure HBA to enter PARTIAL */
- asp = 0;
- break;
- default:
- return -EINVAL;
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ sata_link_scr_lpm(link, policy, false);
}
- /*
- * Disable interrupts on Phy Ready. This keeps us from
- * getting woken up due to spurious phy ready interrupts
- * TBD - Hot plug should be done via polling now, is
- * that even supported?
- */
- pp->intr_mask &= ~PORT_IRQ_PHYRDY;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+ if (hpriv->cap & HOST_CAP_ALPM) {
+ u32 cmd = readl(port_mmio + PORT_CMD);
- /*
- * Set a flag to indicate that we should ignore all PhyRdy
- * state changes since these can happen now whenever we
- * change link state
- */
- hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+ if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) {
+ cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE);
+ cmd |= PORT_CMD_ICC_ACTIVE;
- /* get the existing command bits */
- cmd = readl(port_mmio + PORT_CMD);
+ writel(cmd, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD);
- /*
- * Set ASP based on Policy
- */
- cmd |= asp;
+ /* wait 10ms to be sure we've come out of LPM state */
+ msleep(10);
+ } else {
+ cmd |= PORT_CMD_ALPE;
+ if (policy == ATA_LPM_MIN_POWER)
+ cmd |= PORT_CMD_ASP;
- /*
- * Setting this bit will instruct the HBA to aggressively
- * enter a lower power link state when it's appropriate and
- * based on the value set above for ASP
- */
- cmd |= PORT_CMD_ALPE;
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ }
+ }
- /* write out new cmd value */
- writel(cmd, port_mmio + PORT_CMD);
- cmd = readl(port_mmio + PORT_CMD);
+ if (policy == ATA_LPM_MAX_POWER) {
+ sata_link_scr_lpm(link, policy, false);
+
+ /* turn PHYRDY IRQ back on */
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+ }
- /* IPM bits should be set by libata-core */
return 0;
}
/* issue the first D2H Register FIS */
msecs = 0;
now = jiffies;
- if (time_after(now, deadline))
+ if (time_after(deadline, now))
msecs = jiffies_to_msecs(deadline - now);
tf.ctl |= ATA_SRST;
if (unlikely(resetting))
status &= ~PORT_IRQ_BAD_PMP;
- /* If we are getting PhyRdy, this is
- * just a power state change, we should
- * clear out this, plus the PhyRdy/Comm
- * Wake bits from Serror
- */
- if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
- (status & PORT_IRQ_PHYRDY)) {
+ /* if LPM is enabled, PHYRDY doesn't mean anything */
+ if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) {
status &= ~PORT_IRQ_PHYRDY;
- ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+ ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
}
if (unlikely(status & PORT_IRQ_ERROR)) {
projects / linux-2.6-microblaze.git / blobdiff