return 0;
}
+static int acpi_scan_check_and_detach(struct acpi_device *adev, void *check)
+{
+ struct acpi_scan_handler *handler = adev->handler;
+
+ acpi_dev_for_each_child_reverse(adev, acpi_scan_check_and_detach, check);
+
+ if (check) {
+ acpi_bus_get_status(adev);
+ /*
+ * Skip devices that are still there and take the enabled
+ * flag into account.
+ */
+ if (acpi_device_is_enabled(adev))
+ return 0;
+
+ /* Skip device that have not been enumerated. */
+ if (!acpi_device_enumerated(adev)) {
+ dev_dbg(&adev->dev, "Still not enumerated\n");
+ return 0;
+ }
+ }
+
+ adev->flags.match_driver = false;
+ if (handler) {
+ if (handler->detach)
+ handler->detach(adev);
+
+ adev->handler = NULL;
+ } else {
+ device_release_driver(&adev->dev);
+ }
+ /*
+ * Most likely, the device is going away, so put it into D3cold before
+ * that.
+ */
+ acpi_device_set_power(adev, ACPI_STATE_D3_COLD);
+ adev->flags.initialized = false;
+ acpi_device_clear_enumerated(adev);
+
+ return 0;
+}
+
+static void acpi_scan_check_subtree(struct acpi_device *adev)
+{
+ acpi_scan_check_and_detach(adev, (void *)true);
+}
+
static int acpi_scan_hot_remove(struct acpi_device *device)
{
acpi_handle handle = device->handle;
return 0;
}
-static int acpi_scan_device_not_enumerated(struct acpi_device *adev)
+static int acpi_scan_rescan_bus(struct acpi_device *adev)
{
- if (!acpi_device_enumerated(adev)) {
- dev_warn(&adev->dev, "Still not enumerated\n");
- return -EALREADY;
- }
- acpi_bus_trim(adev);
- return 0;
+ struct acpi_scan_handler *handler = adev->handler;
+ int ret;
+
+ if (handler && handler->hotplug.scan_dependent)
+ ret = handler->hotplug.scan_dependent(adev);
+ else
+ ret = acpi_bus_scan(adev->handle);
+
+ if (ret)
+ dev_info(&adev->dev, "Namespace scan failure\n");
+
+ return ret;
}
static int acpi_scan_device_check(struct acpi_device *adev)
{
- int error;
+ struct acpi_device *parent;
- acpi_bus_get_status(adev);
- if (acpi_device_is_present(adev)) {
- /*
- * This function is only called for device objects for which
- * matching scan handlers exist. The only situation in which
- * the scan handler is not attached to this device object yet
- * is when the device has just appeared (either it wasn't
- * present at all before or it was removed and then added
- * again).
- */
- if (adev->handler) {
- dev_warn(&adev->dev, "Already enumerated\n");
- return -EALREADY;
- }
- error = acpi_bus_scan(adev->handle);
- if (error) {
- dev_warn(&adev->dev, "Namespace scan failure\n");
- return error;
- }
- if (!adev->handler) {
- dev_warn(&adev->dev, "Enumeration failure\n");
- error = -ENODEV;
- }
- } else {
- error = acpi_scan_device_not_enumerated(adev);
- }
- return error;
-}
+ acpi_scan_check_subtree(adev);
-static int acpi_scan_bus_check(struct acpi_device *adev, void *not_used)
-{
- struct acpi_scan_handler *handler = adev->handler;
- int error;
+ if (!acpi_device_is_present(adev))
+ return 0;
- acpi_bus_get_status(adev);
- if (!acpi_device_is_present(adev)) {
- acpi_scan_device_not_enumerated(adev);
+ /*
+ * This function is only called for device objects for which matching
+ * scan handlers exist. The only situation in which the scan handler
+ * is not attached to this device object yet is when the device has
+ * just appeared (either it wasn't present at all before or it was
+ * removed and then added again).
+ */
+ if (adev->handler) {
+ dev_dbg(&adev->dev, "Already enumerated\n");
return 0;
}
- if (handler && handler->hotplug.scan_dependent)
- return handler->hotplug.scan_dependent(adev);
- error = acpi_bus_scan(adev->handle);
- if (error) {
- dev_warn(&adev->dev, "Namespace scan failure\n");
- return error;
- }
- return acpi_dev_for_each_child(adev, acpi_scan_bus_check, NULL);
+ parent = acpi_dev_parent(adev);
+ if (!parent)
+ parent = adev;
+
+ return acpi_scan_rescan_bus(parent);
+}
+
+static int acpi_scan_bus_check(struct acpi_device *adev)
+{
+ acpi_scan_check_subtree(adev);
+
+ return acpi_scan_rescan_bus(adev);
}
static int acpi_generic_hotplug_event(struct acpi_device *adev, u32 type)
{
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
- return acpi_scan_bus_check(adev, NULL);
+ return acpi_scan_bus_check(adev);
case ACPI_NOTIFY_DEVICE_CHECK:
return acpi_scan_device_check(adev);
case ACPI_NOTIFY_EJECT_REQUEST:
"INTC1059", /* IVSC (TGL) driver must be loaded to allow i2c access to camera sensors */
"INTC1095", /* IVSC (ADL) driver must be loaded to allow i2c access to camera sensors */
"INTC100A", /* IVSC (RPL) driver must be loaded to allow i2c access to camera sensors */
+ "INTC10CF", /* IVSC (MTL) driver must be loaded to allow i2c access to camera sensors */
NULL
};
return adev->status.present || adev->status.functional;
}
+bool acpi_device_is_enabled(const struct acpi_device *adev)
+{
+ return adev->status.present && adev->status.enabled;
+}
+
static bool acpi_scan_handler_matching(struct acpi_scan_handler *handler,
const char *idstr,
const struct acpi_device_id **matchid)
}
EXPORT_SYMBOL(acpi_bus_scan);
-static int acpi_bus_trim_one(struct acpi_device *adev, void *not_used)
-{
- struct acpi_scan_handler *handler = adev->handler;
-
- acpi_dev_for_each_child_reverse(adev, acpi_bus_trim_one, NULL);
-
- adev->flags.match_driver = false;
- if (handler) {
- if (handler->detach)
- handler->detach(adev);
-
- adev->handler = NULL;
- } else {
- device_release_driver(&adev->dev);
- }
- /*
- * Most likely, the device is going away, so put it into D3cold before
- * that.
- */
- acpi_device_set_power(adev, ACPI_STATE_D3_COLD);
- adev->flags.initialized = false;
- acpi_device_clear_enumerated(adev);
-
- return 0;
-}
-
/**
* acpi_bus_trim - Detach scan handlers and drivers from ACPI device objects.
* @adev: Root of the ACPI namespace scope to walk.
*/
void acpi_bus_trim(struct acpi_device *adev)
{
- acpi_bus_trim_one(adev, NULL);
+ acpi_scan_check_and_detach(adev, NULL);
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
projects / linux-2.6-microblaze.git / blobdiff