--- /dev/null
+/*
+ * This header file describes this specific Xtensa processor's TIE extensions
+ * that extend basic Xtensa core functionality. It is customized to this
+ * Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of version 2.1 of the GNU
+ * Lesser General Public License as published by the Free Software Foundation.
+ *
+ * Copyright (C) 1999-2009 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM 1 /* number of coprocessors */
+#define XCHAL_CP_MAX 2 /* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK 0x02 /* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
+
+/* Basic parameters of each coprocessor: */
+#define XCHAL_CP1_NAME "AudioEngineLX"
+#define XCHAL_CP1_IDENT AudioEngineLX
+#define XCHAL_CP1_SA_SIZE 112 /* size of state save area */
+#define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */
+#define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */
+
+/* Filler info for unassigned coprocessors, to simplify arrays etc: */
+#define XCHAL_CP0_SA_SIZE 0
+#define XCHAL_CP0_SA_ALIGN 1
+#define XCHAL_CP2_SA_SIZE 0
+#define XCHAL_CP2_SA_ALIGN 1
+#define XCHAL_CP3_SA_SIZE 0
+#define XCHAL_CP3_SA_ALIGN 1
+#define XCHAL_CP4_SA_SIZE 0
+#define XCHAL_CP4_SA_ALIGN 1
+#define XCHAL_CP5_SA_SIZE 0
+#define XCHAL_CP5_SA_ALIGN 1
+#define XCHAL_CP6_SA_SIZE 0
+#define XCHAL_CP6_SA_ALIGN 1
+#define XCHAL_CP7_SA_SIZE 0
+#define XCHAL_CP7_SA_ALIGN 1
+
+/* Save area for non-coprocessor optional and custom (TIE) state: */
+#define XCHAL_NCP_SA_SIZE 12
+#define XCHAL_NCP_SA_ALIGN 4
+
+/* Total save area for optional and custom state (NCP + CPn): */
+#define XCHAL_TOTAL_SA_SIZE 128 /* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN 8 /* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ * dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ * s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ * ccused = set if used by compiler without special options or code
+ * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ * name = lowercase reg name (no quotes)
+ * galign = group byte alignment (power of 2) (galign >= align)
+ * align = register byte alignment (power of 2)
+ * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ * (not including any pad bytes required to galign this or next reg)
+ * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ * base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ * regnum = reg index in regfile, or special/TIE-user reg number
+ * bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ * gapsz = intervening bits, if bitsz bits not stored contiguously
+ * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ * reset = register reset value (or 0 if undefined at reset)
+ * x = reserved for future use (0 until then)
+ *
+ * To filter out certain registers, e.g. to expand only the non-global
+ * registers used by the compiler, you can do something like this:
+ *
+ * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
+ * #define SELCC0(p...)
+ * #define SELCC1(abikind,p...) SELAK##abikind(p)
+ * #define SELAK0(p...) REG(p)
+ * #define SELAK1(p...) REG(p)
+ * #define SELAK2(p...)
+ * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ * ...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM 3
+#define XCHAL_NCP_SA_LIST(s) \
+ XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM 0
+#define XCHAL_CP0_SA_LIST(s) /* empty */
+
+#define XCHAL_CP1_SA_NUM 16
+#define XCHAL_CP1_SA_LIST(s) \
+ XCHAL_SA_REG(s,0,0,1,0, ae_ovf_sar, 8, 4, 4,0x03F0, ur,240, 7,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, ae_bithead, 4, 4, 4,0x03F1, ur,241, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2, ur,242, 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0, ae_sd_no, 4, 4, 4,0x03F3, ur,243, 28,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep0, 8, 8, 8,0x0060, aep,0 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep1, 8, 8, 8,0x0061, aep,1 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep2, 8, 8, 8,0x0062, aep,2 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep3, 8, 8, 8,0x0063, aep,3 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep4, 8, 8, 8,0x0064, aep,4 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep5, 8, 8, 8,0x0065, aep,5 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep6, 8, 8, 8,0x0066, aep,6 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aep7, 8, 8, 8,0x0067, aep,7 , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aeq0, 8, 8, 8,0x0068, aeq,0 , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aeq1, 8, 8, 8,0x0069, aeq,1 , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aeq2, 8, 8, 8,0x006A, aeq,2 , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0, aeq3, 8, 8, 8,0x006B, aeq,3 , 56,0,0,0)
+
+#define XCHAL_CP2_SA_NUM 0
+#define XCHAL_CP2_SA_LIST(s) /* empty */
+
+#define XCHAL_CP3_SA_NUM 0
+#define XCHAL_CP3_SA_LIST(s) /* empty */
+
+#define XCHAL_CP4_SA_NUM 0
+#define XCHAL_CP4_SA_LIST(s) /* empty */
+
+#define XCHAL_CP5_SA_NUM 0
+#define XCHAL_CP5_SA_LIST(s) /* empty */
+
+#define XCHAL_CP6_SA_NUM 0
+#define XCHAL_CP6_SA_LIST(s) /* empty */
+
+#define XCHAL_CP7_SA_NUM 0
+#define XCHAL_CP7_SA_LIST(s) /* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
+#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8
+
+#endif /*_XTENSA_CORE_TIE_H*/
projects / linux-2.6-microblaze.git / blobdiff