return 0;
}
+
+/*
+ * PHB3 and beyond support segmented windows. The window's address range
+ * is subdivided into phb->ioda.total_pe_num segments and there's a 1-1
+ * mapping between PEs and segments.
+ */
+static int64_t pnv_ioda_map_m64_segmented(struct pnv_phb *phb,
+ int window_id,
+ resource_size_t start,
+ resource_size_t size)
+{
+ int64_t rc;
+
+ rc = opal_pci_set_phb_mem_window(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE,
+ window_id,
+ start,
+ 0, /* unused */
+ size);
+ if (rc)
+ goto out;
+
+ rc = opal_pci_phb_mmio_enable(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE,
+ window_id,
+ OPAL_ENABLE_M64_SPLIT);
+out:
+ if (rc)
+ pr_err("Failed to map M64 window #%d: %lld\n", window_id, rc);
+
+ return rc;
+}
+
+static int64_t pnv_ioda_map_m64_single(struct pnv_phb *phb,
+ int pe_num,
+ int window_id,
+ resource_size_t start,
+ resource_size_t size)
+{
+ int64_t rc;
+
+ /*
+ * The API for setting up m64 mmio windows seems to have been designed
+ * with P7-IOC in mind. For that chip each M64 BAR (window) had a fixed
+ * split of 8 equally sized segments each of which could individually
+ * assigned to a PE.
+ *
+ * The problem with this is that the API doesn't have any way to
+ * communicate the number of segments we want on a BAR. This wasn't
+ * a problem for p7-ioc since you didn't have a choice, but the
+ * single PE windows added in PHB3 don't map cleanly to this API.
+ *
+ * As a result we've got this slightly awkward process where we
+ * call opal_pci_map_pe_mmio_window() to put the single in single
+ * PE mode, and set the PE for the window before setting the address
+ * bounds. We need to do it this way because the single PE windows
+ * for PHB3 have different alignment requirements on PHB3.
+ */
+ rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+ pe_num,
+ OPAL_M64_WINDOW_TYPE,
+ window_id,
+ 0);
+ if (rc)
+ goto out;
+
+ /*
+ * NB: In single PE mode the window needs to be aligned to 32MB
+ */
+ rc = opal_pci_set_phb_mem_window(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE,
+ window_id,
+ start,
+ 0, /* ignored by FW, m64 is 1-1 */
+ size);
+ if (rc)
+ goto out;
+
+ /*
+ * Now actually enable it. We specified the BAR should be in "non-split"
+ * mode so FW will validate that the BAR is in single PE mode.
+ */
+ rc = opal_pci_phb_mmio_enable(phb->opal_id,
+ OPAL_M64_WINDOW_TYPE,
+ window_id,
+ OPAL_ENABLE_M64_NON_SPLIT);
+out:
+ if (rc)
+ pr_err("Error mapping single PE BAR\n");
+
+ return rc;
+}
+
static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
{
struct pnv_iov_data *iov;
int64_t rc;
int total_vfs;
resource_size_t size, start;
- int pe_num;
int m64_bars;
phb = pci_bus_to_pnvhb(pdev->bus);
} while (test_and_set_bit(win, &phb->ioda.m64_bar_alloc));
set_bit(win, iov->used_m64_bar_mask);
+
if (iov->m64_single_mode) {
size = pci_iov_resource_size(pdev,
PCI_IOV_RESOURCES + i);
start = res->start + size * j;
+ rc = pnv_ioda_map_m64_single(phb, win,
+ iov->pe_num_map[j],
+ start,
+ size);
} else {
size = resource_size(res);
start = res->start;
- }
- /* Map the M64 here */
- if (iov->m64_single_mode) {
- pe_num = iov->pe_num_map[j];
- rc = opal_pci_map_pe_mmio_window(phb->opal_id,
- pe_num, OPAL_M64_WINDOW_TYPE,
- win, 0);
+ rc = pnv_ioda_map_m64_segmented(phb, win, start,
+ size);
}
- rc = opal_pci_set_phb_mem_window(phb->opal_id,
- OPAL_M64_WINDOW_TYPE,
- win,
- start,
- 0, /* unused */
- size);
-
-
if (rc != OPAL_SUCCESS) {
dev_err(&pdev->dev, "Failed to map M64 window #%d: %lld\n",
win, rc);
goto m64_failed;
}
-
- if (iov->m64_single_mode)
- rc = opal_pci_phb_mmio_enable(phb->opal_id,
- OPAL_M64_WINDOW_TYPE, win, 2);
- else
- rc = opal_pci_phb_mmio_enable(phb->opal_id,
- OPAL_M64_WINDOW_TYPE, win, 1);
-
- if (rc != OPAL_SUCCESS) {
- dev_err(&pdev->dev, "Failed to enable M64 window #%d: %llx\n",
- win, rc);
- goto m64_failed;
- }
}
}
return 0;
projects / linux-2.6-microblaze.git / blobdiff