/*
* check if we need to save FPU registers
*/
- PTR_L t3, TASK_THREAD_INFO(a0)
- LONG_L t0, TI_FLAGS(t3)
- li t1, _TIF_USEDFPU
- and t2, t0, t1
- beqz t2, 1f
- nor t1, zero, t1
-
- and t0, t0, t1
- LONG_S t0, TI_FLAGS(t3)
+ .set push
+ .set noreorder
+ beqz a3, 1f
+ PTR_L t3, TASK_THREAD_INFO(a0)
+ .set pop
/*
* clear saved user stack CU1 bit
1:
/* check if we need to save COP2 registers */
- PTR_L t2, TASK_THREAD_INFO(a0)
- LONG_L t0, ST_OFF(t2)
+ LONG_L t0, ST_OFF(t3)
bbit0 t0, 30, 1f
/* Disable COP2 in the stored process state */
li t1, ST0_CU2
xor t0, t1
- LONG_S t0, ST_OFF(t2)
+ LONG_S t0, ST_OFF(t3)
/* Enable COP2 so we can save it */
mfc0 t0, CP0_STATUS
* void octeon_cop2_save(struct octeon_cop2_state *a0)
*/
.align 7
+ .set push
+ .set noreorder
LEAF(octeon_cop2_save)
dmfc0 t9, $9,7 /* CvmCtl register. */
dmfc2 t2, 0x0200
sd t0, OCTEON_CP2_CRC_IV(a0)
sd t1, OCTEON_CP2_CRC_LENGTH(a0)
- sd t2, OCTEON_CP2_CRC_POLY(a0)
/* Skip next instructions if CvmCtl[NODFA_CP2] set */
bbit1 t9, 28, 1f
+ sd t2, OCTEON_CP2_CRC_POLY(a0)
/* Save the LLM state */
dmfc2 t0, 0x0402
dmfc2 t1, 0x040A
sd t0, OCTEON_CP2_LLM_DAT(a0)
- sd t1, OCTEON_CP2_LLM_DAT+8(a0)
1: bbit1 t9, 26, 3f /* done if CvmCtl[NOCRYPTO] set */
+ sd t1, OCTEON_CP2_LLM_DAT+8(a0)
/* Save the COP2 crypto state */
/* this part is mostly common to both pass 1 and later revisions */
sd t2, OCTEON_CP2_AES_KEY+16(a0)
dmfc2 t2, 0x0101
sd t3, OCTEON_CP2_AES_KEY+24(a0)
- mfc0 t3, $15,0 /* Get the processor ID register */
+ mfc0 v0, $15,0 /* Get the processor ID register */
sd t0, OCTEON_CP2_AES_KEYLEN(a0)
- li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
+ li v1, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
sd t1, OCTEON_CP2_AES_RESULT(a0)
- sd t2, OCTEON_CP2_AES_RESULT+8(a0)
/* Skip to the Pass1 version of the remainder of the COP2 state */
- beq t3, t0, 2f
+ beq v0, v1, 2f
+ sd t2, OCTEON_CP2_AES_RESULT+8(a0)
/* the non-pass1 state when !CvmCtl[NOCRYPTO] */
dmfc2 t1, 0x0240
dmfc2 t2, 0x0241
+ ori v1, v1, 0x9500 /* lowest OCTEON III PrId*/
dmfc2 t3, 0x0242
+ subu v1, v0, v1 /* prid - lowest OCTEON III PrId */
dmfc2 t0, 0x0243
sd t1, OCTEON_CP2_HSH_DATW(a0)
dmfc2 t1, 0x0244
sd t1, OCTEON_CP2_GFM_MULT+8(a0)
sd t2, OCTEON_CP2_GFM_POLY(a0)
sd t3, OCTEON_CP2_GFM_RESULT(a0)
- sd t0, OCTEON_CP2_GFM_RESULT+8(a0)
+ bltz v1, 4f
+ sd t0, OCTEON_CP2_GFM_RESULT+8(a0)
+ /* OCTEON III things*/
+ dmfc2 t0, 0x024F
+ dmfc2 t1, 0x0050
+ sd t0, OCTEON_CP2_SHA3(a0)
+ sd t1, OCTEON_CP2_SHA3+8(a0)
+4:
jr ra
+ nop
2: /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */
dmfc2 t3, 0x0040
3: /* pass 1 or CvmCtl[NOCRYPTO] set */
jr ra
+ nop
END(octeon_cop2_save)
+ .set pop
/*
* void octeon_cop2_restore(struct octeon_cop2_state *a0)
ld t2, OCTEON_CP2_AES_RESULT+8(a0)
mfc0 t3, $15,0 /* Get the processor ID register */
dmtc2 t0, 0x0110
- li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
+ li v0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */
dmtc2 t1, 0x0100
- bne t0, t3, 3f /* Skip the next stuff for non-pass1 */
+ bne v0, t3, 3f /* Skip the next stuff for non-pass1 */
dmtc2 t2, 0x0101
/* this code is specific for pass 1 */
3: /* this is post-pass1 code */
ld t2, OCTEON_CP2_HSH_DATW(a0)
+ ori v0, v0, 0x9500 /* lowest OCTEON III PrId*/
ld t0, OCTEON_CP2_HSH_DATW+8(a0)
ld t1, OCTEON_CP2_HSH_DATW+16(a0)
dmtc2 t2, 0x0240
dmtc2 t2, 0x0259
ld t2, OCTEON_CP2_GFM_RESULT+8(a0)
dmtc2 t0, 0x025E
+ subu v0, t3, v0 /* prid - lowest OCTEON III PrId */
dmtc2 t1, 0x025A
- dmtc2 t2, 0x025B
-
+ bltz v0, done_restore
+ dmtc2 t2, 0x025B
+ /* OCTEON III things*/
+ ld t0, OCTEON_CP2_SHA3(a0)
+ ld t1, OCTEON_CP2_SHA3+8(a0)
+ dmtc2 t0, 0x0051
+ dmtc2 t1, 0x0050
done_restore:
jr ra
nop
* void octeon_mult_save()
* sp is assumed to point to a struct pt_regs
*
- * NOTE: This is called in SAVE_SOME in stackframe.h. It can only
- * safely modify k0 and k1.
+ * NOTE: This is called in SAVE_TEMP in stackframe.h. It can
+ * safely modify v1,k0, k1,$10-$15, and $24. It will
+ * be overwritten with a processor specific version of the code.
*/
- .align 7
+ .p2align 7
.set push
.set noreorder
LEAF(octeon_mult_save)
- dmfc0 k0, $9,7 /* CvmCtl register. */
- bbit1 k0, 27, 1f /* Skip CvmCtl[NOMUL] */
+ jr ra
nop
+ .space 30 * 4, 0
+octeon_mult_save_end:
+ EXPORT(octeon_mult_save_end)
+ END(octeon_mult_save)
- /* Save the multiplier state */
+ LEAF(octeon_mult_save2)
+ /* Save the multiplier state OCTEON II and earlier*/
v3mulu k0, $0, $0
v3mulu k1, $0, $0
sd k0, PT_MTP(sp) /* PT_MTP has P0 */
sd k0, PT_MPL+8(sp) /* PT_MPL+8 has MPL1 */
jr ra
sd k1, PT_MPL+16(sp) /* PT_MPL+16 has MPL2 */
-
-1: /* Resume here if CvmCtl[NOMUL] */
+octeon_mult_save2_end:
+ EXPORT(octeon_mult_save2_end)
+ END(octeon_mult_save2)
+
+ LEAF(octeon_mult_save3)
+ /* Save the multiplier state OCTEON III */
+ v3mulu $10, $0, $0 /* read P0 */
+ v3mulu $11, $0, $0 /* read P1 */
+ v3mulu $12, $0, $0 /* read P2 */
+ sd $10, PT_MTP+(0*8)(sp) /* store P0 */
+ v3mulu $10, $0, $0 /* read P3 */
+ sd $11, PT_MTP+(1*8)(sp) /* store P1 */
+ v3mulu $11, $0, $0 /* read P4 */
+ sd $12, PT_MTP+(2*8)(sp) /* store P2 */
+ ori $13, $0, 1
+ v3mulu $12, $0, $0 /* read P5 */
+ sd $10, PT_MTP+(3*8)(sp) /* store P3 */
+ v3mulu $13, $13, $0 /* P4-P0 = MPL5-MPL1, $13 = MPL0 */
+ sd $11, PT_MTP+(4*8)(sp) /* store P4 */
+ v3mulu $10, $0, $0 /* read MPL1 */
+ sd $12, PT_MTP+(5*8)(sp) /* store P5 */
+ v3mulu $11, $0, $0 /* read MPL2 */
+ sd $13, PT_MPL+(0*8)(sp) /* store MPL0 */
+ v3mulu $12, $0, $0 /* read MPL3 */
+ sd $10, PT_MPL+(1*8)(sp) /* store MPL1 */
+ v3mulu $10, $0, $0 /* read MPL4 */
+ sd $11, PT_MPL+(2*8)(sp) /* store MPL2 */
+ v3mulu $11, $0, $0 /* read MPL5 */
+ sd $12, PT_MPL+(3*8)(sp) /* store MPL3 */
+ sd $10, PT_MPL+(4*8)(sp) /* store MPL4 */
jr ra
- END(octeon_mult_save)
+ sd $11, PT_MPL+(5*8)(sp) /* store MPL5 */
+octeon_mult_save3_end:
+ EXPORT(octeon_mult_save3_end)
+ END(octeon_mult_save3)
.set pop
/*
* void octeon_mult_restore()
* sp is assumed to point to a struct pt_regs
*
- * NOTE: This is called in RESTORE_SOME in stackframe.h.
+ * NOTE: This is called in RESTORE_TEMP in stackframe.h.
*/
- .align 7
+ .p2align 7
.set push
.set noreorder
LEAF(octeon_mult_restore)
- dmfc0 k1, $9,7 /* CvmCtl register. */
- ld v0, PT_MPL(sp) /* MPL0 */
- ld v1, PT_MPL+8(sp) /* MPL1 */
- ld k0, PT_MPL+16(sp) /* MPL2 */
- bbit1 k1, 27, 1f /* Skip CvmCtl[NOMUL] */
- /* Normally falls through, so no time wasted here */
- nop
+ jr ra
+ nop
+ .space 30 * 4, 0
+octeon_mult_restore_end:
+ EXPORT(octeon_mult_restore_end)
+ END(octeon_mult_restore)
+ LEAF(octeon_mult_restore2)
+ ld v0, PT_MPL(sp) /* MPL0 */
+ ld v1, PT_MPL+8(sp) /* MPL1 */
+ ld k0, PT_MPL+16(sp) /* MPL2 */
/* Restore the multiplier state */
- ld k1, PT_MTP+16(sp) /* P2 */
- MTM0 v0 /* MPL0 */
+ ld k1, PT_MTP+16(sp) /* P2 */
+ mtm0 v0 /* MPL0 */
ld v0, PT_MTP+8(sp) /* P1 */
- MTM1 v1 /* MPL1 */
- ld v1, PT_MTP(sp) /* P0 */
- MTM2 k0 /* MPL2 */
- MTP2 k1 /* P2 */
- MTP1 v0 /* P1 */
+ mtm1 v1 /* MPL1 */
+ ld v1, PT_MTP(sp) /* P0 */
+ mtm2 k0 /* MPL2 */
+ mtp2 k1 /* P2 */
+ mtp1 v0 /* P1 */
jr ra
- MTP0 v1 /* P0 */
-
-1: /* Resume here if CvmCtl[NOMUL] */
+ mtp0 v1 /* P0 */
+octeon_mult_restore2_end:
+ EXPORT(octeon_mult_restore2_end)
+ END(octeon_mult_restore2)
+
+ LEAF(octeon_mult_restore3)
+ ld $12, PT_MPL+(0*8)(sp) /* read MPL0 */
+ ld $13, PT_MPL+(3*8)(sp) /* read MPL3 */
+ ld $10, PT_MPL+(1*8)(sp) /* read MPL1 */
+ ld $11, PT_MPL+(4*8)(sp) /* read MPL4 */
+ .word 0x718d0008
+ /* mtm0 $12, $13 restore MPL0 and MPL3 */
+ ld $12, PT_MPL+(2*8)(sp) /* read MPL2 */
+ .word 0x714b000c
+ /* mtm1 $10, $11 restore MPL1 and MPL4 */
+ ld $13, PT_MPL+(5*8)(sp) /* read MPL5 */
+ ld $10, PT_MTP+(0*8)(sp) /* read P0 */
+ ld $11, PT_MTP+(3*8)(sp) /* read P3 */
+ .word 0x718d000d
+ /* mtm2 $12, $13 restore MPL2 and MPL5 */
+ ld $12, PT_MTP+(1*8)(sp) /* read P1 */
+ .word 0x714b0009
+ /* mtp0 $10, $11 restore P0 and P3 */
+ ld $13, PT_MTP+(4*8)(sp) /* read P4 */
+ ld $10, PT_MTP+(2*8)(sp) /* read P2 */
+ ld $11, PT_MTP+(5*8)(sp) /* read P5 */
+ .word 0x718d000a
+ /* mtp1 $12, $13 restore P1 and P4 */
jr ra
- nop
- END(octeon_mult_restore)
+ .word 0x714b000b
+ /* mtp2 $10, $11 restore P2 and P5 */
+
+octeon_mult_restore3_end:
+ EXPORT(octeon_mult_restore3_end)
+ END(octeon_mult_restore3)
.set pop
projects / linux-2.6-microblaze.git / blobdiff