Merge tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

[linux-2.6-microblaze.git] / arch / mips / boot / dts / brcm / bcm6328.dtsi

diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
index 9dc5587..634618d 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -1,4 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6328-clock.h"
+#include "dt-bindings/reset/bcm6328-reset.h"
+#include "dt-bindings/soc/bcm6328-pm.h"
+
 / {
        #address-cells = <1>;
        #size-cells = <1>;
@@ -24,16 +29,26 @@
        };
 
        clocks {
-               periph_clk: periph-clk {
+               periph_osc: periph-osc {
                        compatible = "fixed-clock";
                        #clock-cells = <0>;
                        clock-frequency = <50000000>;
+                       clock-output-names = "periph";
+               };
+
+               hsspi_osc: hsspi-osc {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <133333333>;
+                       clock-output-names = "hsspi_osc";
                };
        };
 
        aliases {
+               nflash = &nflash;
                serial0 = &uart0;
                serial1 = &uart1;
+               spi1 = &hsspi;
        };
 
        cpu_intc: interrupt-controller {
@@ -51,7 +66,7 @@
                compatible = "simple-bus";
                ranges;
 
-               clkctl: clock-controller@10000004 {
+               periph_clk: clock-controller@10000004 {
                        compatible = "brcm,bcm6328-clocks";
                        reg = <0x10000004 0x4>;
                        #clock-cells = <1>;
@@ -75,37 +90,71 @@
                        interrupts = <2>, <3>;
                };
 
+               wdt: watchdog@1000005c {
+                       compatible = "brcm,bcm7038-wdt";
+                       reg = <0x1000005c 0xc>;
+
+                       clocks = <&periph_osc>;
+                       clock-names = "refclk";
+
+                       timeout-sec = <30>;
+               };
+
+               soft_reset: syscon@10000068 {
+                       compatible = "syscon";
+                       reg = <0x10000068 0x4>;
+                       native-endian;
+
+                       reboot {
+                               compatible = "syscon-reboot";
+                               offset = <0x0>;
+                               mask = <0x1>;
+                       };
+               };
+
                uart0: serial@10000100 {
                        compatible = "brcm,bcm6345-uart";
                        reg = <0x10000100 0x18>;
+
                        interrupt-parent = <&periph_intc>;
                        interrupts = <28>;
-                       clocks = <&periph_clk>;
+
+                       clocks = <&periph_osc>;
                        clock-names = "refclk";
+
                        status = "disabled";
                };
 
                uart1: serial@10000120 {
                        compatible = "brcm,bcm6345-uart";
                        reg = <0x10000120 0x18>;
+
                        interrupt-parent = <&periph_intc>;
                        interrupts = <39>;
-                       clocks = <&periph_clk>;
+
+                       clocks = <&periph_osc>;
                        clock-names = "refclk";
+
                        status = "disabled";
                };
 
-               timer: syscon@10000040 {
-                       compatible = "syscon";
-                       reg = <0x10000040 0x2c>;
-                       native-endian;
-               };
+               nflash: nand@10000200 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,nand-bcm6368",
+                                    "brcm,brcmnand-v2.2",
+                                    "brcm,brcmnand";
+                       reg = <0x10000200 0x180>,
+                             <0x10000400 0x200>,
+                             <0x10000070 0x10>;
+                       reg-names = "nand",
+                                   "nand-cache",
+                                   "nand-int-base";
 
-               reboot: syscon-reboot@10000068 {
-                       compatible = "syscon-reboot";
-                       regmap = <&timer>;
-                       offset = <0x28>;
-                       mask = <0x1>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <0>;
+
+                       status = "disabled";
                };
 
                leds0: led-controller@10000800 {
@@ -113,6 +162,27 @@
                        #size-cells = <0>;
                        compatible = "brcm,bcm6328-leds";
                        reg = <0x10000800 0x24>;
+
+                       status = "disabled";
+               };
+
+               hsspi: spi@10001000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-hsspi";
+                       reg = <0x10001000 0x600>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <29>;
+
+                       clocks = <&periph_clk BCM6328_CLK_HSSPI>,
+                                <&hsspi_osc>;
+                       clock-names = "hsspi",
+                                     "pll";
+
+                       resets = <&periph_rst BCM6328_RST_SPI>;
+                       reset-names = "hsspi";
+
                        status = "disabled";
                };
 
@@ -126,8 +196,13 @@
                        compatible = "brcm,bcm6328-ehci", "generic-ehci";
                        reg = <0x10002500 0x100>;
                        big-endian;
+
                        interrupt-parent = <&periph_intc>;
                        interrupts = <42>;
+
+                       phys = <&usbh 0>;
+                       phy-names = "usb";
+
                        status = "disabled";
                };
 
@@ -136,8 +211,29 @@
                        reg = <0x10002600 0x100>;
                        big-endian;
                        no-big-frame-no;
+
                        interrupt-parent = <&periph_intc>;
                        interrupts = <41>;
+
+                       phys = <&usbh 0>;
+                       phy-names = "usb";
+
+                       status = "disabled";
+               };
+
+               usbh: usb-phy@10002700 {
+                       compatible = "brcm,bcm6328-usbh-phy";
+                       reg = <0x10002700 0x38>;
+                       #phy-cells = <1>;
+
+                       clocks = <&periph_clk BCM6328_CLK_USBH>;
+                       clock-names = "usbh";
+
+                       power-domains = <&periph_pwr BCM6328_POWER_DOMAIN_USBH>;
+
+                       resets = <&periph_rst BCM6328_RST_USBH>;
+                       reset-names = "usbh";
+
                        status = "disabled";
                };
        };