Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux...

[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / rockchip / rk3399-firefly.dts

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index e6e9116..c4dd2a6 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
 
@@ -220,6 +221,17 @@
                vin-supply = <&vcc_sys>;
        };
 
+       vcc5v0_typec: vcc5v0-typec-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc5v0_typec_en>;
+               regulator-name = "vcc5v0_typec";
+               regulator-always-on;
+               vin-supply = <&vcc_sys>;
+       };
+
        vcc_sys: vcc-sys {
                compatible = "regulator-fixed";
                regulator-name = "vcc_sys";
@@ -545,6 +557,53 @@
        i2c-scl-falling-time-ns = <20>;
        status = "okay";
 
+       fusb0: typec-portc@22 {
+               compatible = "fcs,fusb302";
+               reg = <0x22>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&fusb0_int>;
+               vbus-supply = <&vcc5v0_typec>;
+               status = "okay";
+
+               connector {
+                       compatible = "usb-c-connector";
+                       data-role = "host";
+                       label = "USB-C";
+                       op-sink-microwatt = <1000000>;
+                       power-role = "dual";
+                       sink-pdos =
+                               <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+                       source-pdos =
+                               <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+                       try-power-role = "sink";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+
+                                       usbc_hs: endpoint {
+                                               remote-endpoint =
+                                                       <&u2phy0_typec_hs>;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+
+                                       usbc_ss: endpoint {
+                                               remote-endpoint =
+                                                       <&tcphy0_typec_ss>;
+                                       };
+                               };
+                       };
+               };
+       };
+
        accelerometer@68 {
                compatible = "invensense,mpu6500";
                reg = <0x68>;
@@ -602,6 +661,12 @@
                };
        };
 
+       fusb302x {
+               fusb0_int: fusb0-int {
+                       rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
        ir {
                ir_int: ir-int {
                        rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -660,6 +725,12 @@
                };
        };
 
+       usb-typec {
+               vcc5v0_typec_en: vcc5v0_typec_en {
+                       rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
        usb2 {
                vcc5v0_host_en: vcc5v0-host-en {
                        rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -753,6 +824,14 @@
        status = "okay";
 };
 
+&tcphy0_usb3 {
+       port {
+               tcphy0_typec_ss: endpoint {
+                       remote-endpoint = <&usbc_ss>;
+               };
+       };
+};
+
 &tcphy1 {
        status = "okay";
 };
@@ -776,6 +855,12 @@
                phy-supply = <&vcc5v0_host>;
                status = "okay";
        };
+
+       port {
+               u2phy0_typec_hs: endpoint {
+                       remote-endpoint = <&usbc_hs>;
+               };
+       };
 };
 
 &u2phy1 {