arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.

[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / rockchip / rk3328-roc-cc.dts

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 0e34354..bb40c16 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -81,18 +81,55 @@
                regulator-always-on;
                regulator-boot-on;
        };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "firefly:blue:power";
+                       linux,default-trigger = "heartbeat";
+                       gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+                       mode = <0x23>;
+               };
+
+               user {
+                       label = "firefly:yellow:user";
+                       linux,default-trigger = "mmc1";
+                       gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       mode = <0x05>;
+               };
+       };
 };
 
 &cpu0 {
        cpu-supply = <&vdd_arm>;
 };
 
+&cpu1 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+       cpu-supply = <&vdd_arm>;
+};
+
 &emmc {
        bus-width = <8>;
        cap-mmc-highspeed;
+       max-frequency = <150000000>;
+       mmc-ddr-1_8v;
+       mmc-hs200-1_8v;
        non-removable;
        pinctrl-names = "default";
        pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+       vmmc-supply = <&vcc_io>;
+       vqmmc-supply = <&vcc18_emmc>;
        status = "okay";
 };
 
@@ -104,15 +141,25 @@
        phy-mode = "rgmii";
        pinctrl-names = "default";
        pinctrl-0 = <&rgmiim1_pins>;
-       snps,force_thresh_dma_mode;
+       snps,aal;
        snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 50000>;
+       snps,rxpbl = <0x4>;
+       snps,txpbl = <0x4>;
        tx_delay = <0x24>;
        rx_delay = <0x18>;
        status = "okay";
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmiphy {
+       status = "okay";
+};
+
 &i2c1 {
        status = "okay";
 
@@ -296,3 +343,11 @@
 &usb_host0_ohci {
        status = "okay";
 };
+
+&vop {
+       status = "okay";
+};
+
+&vop_mmu {
+       status = "okay";
+};