arm64: dts: qcom: c630: Define eDP bridge and panel

[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / qcom / sdm850-lenovo-yoga-c630.dts

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 44fc5aa..13fdd02 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -44,6 +44,26 @@
                        linux,code = <SW_TABLET_MODE>;
                };
        };
+
+       panel {
+               compatible = "boe,nv133fhm-n61";
+               no-hpd;
+
+               ports {
+                       port {
+                               panel_in_edp: endpoint {
+                                       remote-endpoint = <&sn65dsi86_out>;
+                               };
+                       };
+               };
+       };
+
+       sn65dsi86_refclk: sn65dsi86-refclk {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+
+               clock-frequency = <19200000>;
+       };
 };
 
 &adsp_pas {
@@ -260,6 +280,25 @@
        status = "okay";
 };
 
+&dsi0 {
+       status = "okay";
+       vdda-supply = <&vreg_l26a_1p2>;
+
+       ports {
+               port@1 {
+                       endpoint {
+                               remote-endpoint = <&sn65dsi86_in_a>;
+                               data-lanes = <0 1 2 3>;
+                       };
+               };
+       };
+};
+
+&dsi0_phy {
+       status = "okay";
+       vdds-supply = <&vreg_l1a_0p875>;
+};
+
 &gcc {
        protected-clocks = <GCC_QSPI_CORE_CLK>,
                           <GCC_QSPI_CORE_CLK_SRC>,
@@ -323,6 +362,45 @@
        };
 };
 
+&i2c10 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       sn65dsi86: bridge@2c {
+               compatible = "ti,sn65dsi86";
+               reg = <0x2c>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sn65dsi86_pin_active>;
+
+               enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+               vpll-supply = <&vreg_l14a_1p88>;
+               vccio-supply = <&vreg_l14a_1p88>;
+
+               clocks = <&sn65dsi86_refclk>;
+               clock-names = "refclk";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               sn65dsi86_in_a: endpoint {
+                                       remote-endpoint = <&dsi0_out>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               sn65dsi86_out: endpoint {
+                                       remote-endpoint = <&panel_in_edp>;
+                               };
+                       };
+               };
+       };
+};
+
 &i2c11 {
        status = "okay";
        clock-frequency = <400000>;
@@ -339,10 +417,26 @@
        };
 };
 
+&mdss {
+       status = "okay";
+};
+
+&mdss_mdp {
+       status = "okay";
+};
+
 &mss_pil {
        firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
 };
 
+&qup_i2c10_default {
+       pinconf {
+               pins = "gpio55", "gpio56";
+               drive-strength = <2>;
+               bias-disable;
+       };
+};
+
 &qup_i2c12_default {
        drive-strength = <2>;
        bias-disable;
@@ -449,6 +543,12 @@
 &tlmm {
        gpio-reserved-ranges = <0 4>, <81 4>;
 
+       sn65dsi86_pin_active: sn65dsi86-enable {
+               pins = "gpio96";
+               drive-strength = <2>;
+               bias-disable;
+       };
+
        i2c3_hid_active: i2c2-hid-active {
                pins = "gpio37";
                function = "gpio";