Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / qcom / pm4125.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm4125.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi
new file mode 100644 (file)
index 0000000..cf8c822
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+       pmic@0 {
+               compatible = "qcom,pm2250", "qcom,spmi-pmic";
+               reg = <0x0 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pon@800 {
+                       compatible = "qcom,pm8916-pon";
+                       reg = <0x800>;
+
+                       pm4125_pwrkey: pwrkey {
+                               compatible = "qcom,pm8941-pwrkey";
+                               interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                               linux,code = <KEY_POWER>;
+                               debounce = <15625>;
+                               bias-pull-up;
+                       };
+
+                       pm4125_resin: resin {
+                               compatible = "qcom,pm8941-resin";
+                               interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+                               debounce = <15625>;
+                               bias-pull-up;
+                               status = "disabled";
+                       };
+               };
+
+               pm4125_vbus: usb-vbus-regulator@1100 {
+                       compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg";
+                       reg = <0x1100>;
+                       status = "disabled";
+               };
+
+               pm4125_typec: typec@1500 {
+                       compatible = "qcom,pm4125-typec", "qcom,pmi632-typec";
+                       reg = <0x1500>;
+                       interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+                                    <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+                                    <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+                                    <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+                                    <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+                                    <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+                                    <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+                                    <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "or-rid-detect-change",
+                                         "vpd-detect",
+                                         "cc-state-change",
+                                         "vconn-oc",
+                                         "vbus-change",
+                                         "attach-detach",
+                                         "legacy-cable-detect",
+                                         "try-snk-src-detect";
+                       vdd-vbus-supply = <&pm4125_vbus>;
+
+                       status = "disabled";
+               };
+
+               rtc@6000 {
+                       compatible = "qcom,pm8941-rtc";
+                       reg = <0x6000>, <0x6100>;
+                       reg-names = "rtc", "alarm";
+                       interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+               };
+
+               pm4125_gpios: gpio@c000 {
+                       compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
+                       reg = <0xc000>;
+                       gpio-controller;
+                       gpio-ranges = <&pm4125_gpios 0 0 10>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       pmic@1 {
+               compatible = "qcom,pm2250", "qcom,spmi-pmic";
+               reg = <0x1 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+       };
+};