kunit: Print test statistics on failure

[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / qcom / ipq8074.dtsi

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a32e5e7..95d6cb8 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -165,6 +165,7 @@
                        clock-names = "cfg_ahb", "ref";
 
                        resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+                       status = "disabled";
                };
 
                pcie_phy0: phy@86000 {
@@ -372,6 +373,21 @@
                        status = "disabled";
                };
 
+               blsp1_i2c6: i2c@78ba000 {
+                       compatible = "qcom,i2c-qup-v2.2.1";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x078ba000 0x600>;
+                       interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+                                <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+                       clock-names = "iface", "core";
+                       clock-frequency = <100000>;
+                       dmas = <&blsp_dma 23>, <&blsp_dma 22>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
                qpic_bam: dma-controller@7984000 {
                        compatible = "qcom,bam-v1.7.0";
                        reg = <0x07984000 0x1a000>;
@@ -427,7 +443,7 @@
                        resets = <&gcc GCC_USB0_BCR>;
                        status = "disabled";
 
-                       dwc_0: dwc3@8a00000 {
+                       dwc_0: usb@8a00000 {
                                compatible = "snps,dwc3";
                                reg = <0x8a00000 0xcd00>;
                                interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +484,7 @@
                        resets = <&gcc GCC_USB1_BCR>;
                        status = "disabled";
 
-                       dwc_1: dwc3@8c00000 {
+                       dwc_1: usb@8c00000 {
                                compatible = "snps,dwc3";
                                reg = <0x8c00000 0xcd00>;
                                interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;