ARM: sa1100: remove unused board files

[linux-2.6-microblaze.git] / arch / arm / mach-sa1100 / h3100.c

diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
deleted file mode 100644 (file)
index 51eaeea..0000000
--- a/arch/arm/mach-sa1100/h3100.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for Compaq iPAQ H3100 handheld computer
- *
- * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
- * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <video/sa1100fb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/platform_data/irda-sa11x0.h>
-
-#include <mach/h3xxx.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/*
- * helper for sa1100fb
- */
-static struct gpio h3100_lcd_gpio[] = {
-       { H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" },
-       { H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" },
-};
-
-static bool h3100_lcd_request(void)
-{
-       static bool h3100_lcd_ok;
-       int rc;
-
-       if (h3100_lcd_ok)
-               return true;
-
-       rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio));
-       if (rc)
-               pr_err("%s: can't request GPIOs\n", __func__);
-       else
-               h3100_lcd_ok = true;
-
-       return h3100_lcd_ok;
-}
-
-static void h3100_lcd_power(int enable)
-{
-       if (!h3100_lcd_request())
-               return;
-
-       gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
-       gpio_set_value(H3XXX_EGPIO_LCD_ON, enable);
-}
-
-static struct sa1100fb_mach_info h3100_lcd_info = {
-       .pixclock       = 406977,       .bpp            = 4,
-       .xres           = 320,          .yres           = 240,
-
-       .hsync_len      = 26,           .vsync_len      = 41,
-       .left_margin    = 4,            .upper_margin   = 0,
-       .right_margin   = 4,            .lower_margin   = 0,
-
-       .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-       .cmap_greyscale = 1,
-       .cmap_inverse   = 1,
-
-       .lccr0          = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-       .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-       .lcd_power = h3100_lcd_power,
-};
-
-static void __init h3100_map_io(void)
-{
-       h3xxx_map_io();
-
-       /* Older bootldrs put GPIO2-9 in alternate mode on the
-          assumption that they are used for video */
-       GAFR &= ~0x000001fb;
-}
-
-/*
- * This turns the IRDA power on or off on the Compaq H3100
- */
-static struct gpio h3100_irda_gpio[] = {
-       { H3100_GPIO_IR_ON,     GPIOF_OUT_INIT_LOW, "IrDA power" },
-       { H3100_GPIO_IR_FSEL,   GPIOF_OUT_INIT_LOW, "IrDA fsel" },
-};
-
-static int h3100_irda_set_power(struct device *dev, unsigned int state)
-{
-       gpio_set_value(H3100_GPIO_IR_ON, state);
-       return 0;
-}
-
-static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
-{
-       gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static int h3100_irda_startup(struct device *dev)
-{
-       return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static void h3100_irda_shutdown(struct device *dev)
-{
-       return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static struct irda_platform_data h3100_irda_data = {
-       .set_power      = h3100_irda_set_power,
-       .set_speed      = h3100_irda_set_speed,
-       .startup        = h3100_irda_startup,
-       .shutdown       = h3100_irda_shutdown,
-};
-
-static void __init h3100_mach_init(void)
-{
-       h3xxx_mach_init();
-
-       sa11x0_register_pcmcia(-1, NULL);
-       sa11x0_register_lcd(&h3100_lcd_info);
-       sa11x0_register_irda(&h3100_irda_data);
-}
-
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-       .atag_offset    = 0x100,
-       .map_io         = h3100_map_io,
-       .nr_irqs        = SA1100_NR_IRQS,
-       .init_irq       = sa1100_init_irq,
-       .init_time      = sa1100_timer_init,
-       .init_machine   = h3100_mach_init,
-       .init_late      = sa11x0_init_late,
-       .restart        = sa11x0_restart,
-MACHINE_END
-