THUMB(1: )
#endif
- setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
+#ifdef CONFIG_ARM_VIRT_EXT
+ bl __hyp_stub_install
+#endif
+ @ ensure svc mode and all interrupts masked
+ safe_svcmode_maskall r9
@ and irqs disabled
#if defined(CONFIG_CPU_CP15)
mrc p15, 0, r9, c0, c0 @ get processor id
beq __error_p @ yes, error 'p'
#ifdef CONFIG_ARM_MPU
- /* Calculate the size of a region covering just the kernel */
- ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET
- ldr r6, =(_end) @ Cover whole kernel
- sub r6, r6, r5 @ Minimum size of region to map
- clz r6, r6 @ Region size must be 2^N...
- rsb r6, r6, #31 @ ...so round up region size
- lsl r6, r6, #MPU_RSR_SZ @ Put size in right field
- orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit
bl __setup_mpu
#endif
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
ret r12
-1: bl __after_proc_init
- b __mmap_switched
+1: ldr lr, =__mmap_switched
+ b __after_proc_init
ENDPROC(stext)
#ifdef CONFIG_SMP
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
- setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+#ifdef CONFIG_ARM_VIRT_EXT
+ bl __hyp_stub_install_secondary
+#endif
+ safe_svcmode_maskall r9
+
#ifndef CONFIG_CPU_CP15
ldr r9, =CONFIG_PROCESSOR_ID
#else
ldr r7, __secondary_data
#ifdef CONFIG_ARM_MPU
- /* Use MPU region info supplied by __cpu_up */
- ldr r6, [r7] @ get secondary_data.mpu_rgn_info
bl __secondary_setup_mpu @ Initialize the MPU
#endif
/*
* Set the Control Register and Read the process ID.
*/
+ .text
__after_proc_init:
+#ifdef CONFIG_ARM_MPU
+M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
+M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)
+M_CLASS(ldr r3, [r12, 0x50])
+AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0
+ and r3, r3, #(MMFR0_PMSA) @ PMSA field
+ teq r3, #(MMFR0_PMSAv7) @ PMSA v7
+ beq 1f
+ teq r3, #(MMFR0_PMSAv8) @ PMSA v8
+ /*
+ * Memory region attributes for PMSAv8:
+ *
+ * n = AttrIndx[2:0]
+ * n MAIR
+ * DEVICE_nGnRnE 000 00000000
+ * NORMAL 001 11111111
+ */
+ ldreq r3, =PMSAv8_MAIR(0x00, PMSAv8_RGN_DEVICE_nGnRnE) | \
+ PMSAv8_MAIR(0xff, PMSAv8_RGN_NORMAL)
+AR_CLASS(mcreq p15, 0, r3, c10, c2, 0) @ MAIR 0
+M_CLASS(streq r3, [r12, #PMSAv8_MAIR0])
+ moveq r3, #0
+AR_CLASS(mcreq p15, 0, r3, c10, c2, 1) @ MAIR 1
+M_CLASS(streq r3, [r12, #PMSAv8_MAIR1])
+
+1:
+#endif
#ifdef CONFIG_CPU_CP15
/*
* CP15 system control register value returned in r0 from
* the CPU init function.
*/
+
+#ifdef CONFIG_ARM_MPU
+ biceq r0, r0, #CR_BR @ Disable the 'default mem-map'
+ orreq r0, r0, #CR_M @ Set SCTRL.M (MPU on)
+#endif
#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_I
#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
+ instr_sync
#elif defined (CONFIG_CPU_V7M)
+#ifdef CONFIG_ARM_MPU
+ ldreq r3, [r12, MPU_CTRL]
+ biceq r3, #MPU_CTRL_PRIVDEFENA
+ orreq r3, #MPU_CTRL_ENABLE
+ streq r3, [r12, MPU_CTRL]
+ isb
+#endif
/* For V7M systems we want to modify the CCR similarly to the SCTLR */
#ifdef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #V7M_SCB_CCR_DC
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #V7M_SCB_CCR_IC
#endif
- movw r3, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
- movt r3, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
- str r0, [r3]
+ str r0, [r12, V7M_SCB_CCR]
#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
ret lr
ENDPROC(__after_proc_init)
.endm
/* Setup a single MPU region, either D or I side (D-side for unified) */
-.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE, unused
+.macro setup_region bar, acr, sr, side = PMSAv7_DATA_SIDE, unused
mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR
mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR
mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR
#else
.macro set_region_nr tmp, rgnr, base
mov \tmp, \rgnr
- str \tmp, [\base, #MPU_RNR]
+ str \tmp, [\base, #PMSAv7_RNR]
.endm
.macro setup_region bar, acr, sr, unused, base
lsl \acr, \acr, #16
orr \acr, \acr, \sr
- str \bar, [\base, #MPU_RBAR]
- str \acr, [\base, #MPU_RASR]
+ str \bar, [\base, #PMSAv7_RBAR]
+ str \acr, [\base, #PMSAv7_RASR]
.endm
#endif
* Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
* Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
*
- * r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION
+ * r6: Value to be written to DRSR (and IRSR if required) for PMSAv7_RAM_REGION
*/
+ __HEAD
ENTRY(__setup_mpu)
M_CLASS(ldr r0, [r12, 0x50])
and r0, r0, #(MMFR0_PMSA) @ PMSA field
teq r0, #(MMFR0_PMSAv7) @ PMSA v7
- bxne lr
+ beq __setup_pmsa_v7
+ teq r0, #(MMFR0_PMSAv8) @ PMSA v8
+ beq __setup_pmsa_v8
+
+ ret lr
+ENDPROC(__setup_mpu)
+
+ENTRY(__setup_pmsa_v7)
+ /* Calculate the size of a region covering just the kernel */
+ ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET
+ ldr r6, =(_end) @ Cover whole kernel
+ sub r6, r6, r5 @ Minimum size of region to map
+ clz r6, r6 @ Region size must be 2^N...
+ rsb r6, r6, #31 @ ...so round up region size
+ lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field
+ orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit
/* Determine whether the D/I-side memory map is unified. We set the
* flags here and continue to use them for the rest of this function */
tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
/* Setup second region first to free up r6 */
- set_region_nr r0, #MPU_RAM_REGION, r12
+ set_region_nr r0, #PMSAv7_RAM_REGION, r12
isb
/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET
- ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
+ ldr r5,=(PMSAv7_AP_PL1RW_PL0RW | PMSAv7_RGN_NORMAL)
- setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled
+ setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled
beq 1f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled
+ setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled
1: isb
/* First/background region */
- set_region_nr r0, #MPU_BG_REGION, r12
+ set_region_nr r0, #PMSAv7_BG_REGION, r12
isb
/* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */
mov r0, #0 @ BG region starts at 0x0
- ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA)
- mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled
+ ldr r5,=(PMSAv7_ACR_XN | PMSAv7_RGN_STRONGLY_ORDERED | PMSAv7_AP_PL1RW_PL0NA)
+ mov r6, #PMSAv7_RSR_ALL_MEM @ 4GB region, enabled
- setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ 0x0, BG region, enabled
+ setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ 0x0, BG region, enabled
beq 2f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE r12 @ 0x0, BG region, enabled
+ setup_region r0, r5, r6, PMSAv7_INSTR_SIDE r12 @ 0x0, BG region, enabled
2: isb
#ifdef CONFIG_XIP_KERNEL
- set_region_nr r0, #MPU_ROM_REGION, r12
+ set_region_nr r0, #PMSAv7_ROM_REGION, r12
isb
- ldr r5,=(MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL)
+ ldr r5,=(PMSAv7_AP_PL1RO_PL0NA | PMSAv7_RGN_NORMAL)
ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start
ldr r6, =(_exiprom) @ ROM end
sub r6, r6, r0 @ Minimum size of region to map
clz r6, r6 @ Region size must be 2^N...
rsb r6, r6, #31 @ ...so round up region size
- lsl r6, r6, #MPU_RSR_SZ @ Put size in right field
- orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit
+ lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field
+ orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit
- setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
+ setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
beq 3f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
+ setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
3: isb
+#endif
+ ret lr
+ENDPROC(__setup_pmsa_v7)
+
+ENTRY(__setup_pmsa_v8)
+ mov r0, #0
+AR_CLASS(mcr p15, 0, r0, c6, c2, 1) @ PRSEL
+M_CLASS(str r0, [r12, #PMSAv8_RNR])
+ isb
+
+#ifdef CONFIG_XIP_KERNEL
+ ldr r5, =CONFIG_XIP_PHYS_ADDR @ ROM start
+ ldr r6, =(_exiprom) @ ROM end
+ sub r6, r6, #1
+ bic r6, r6, #(PMSAv8_MINALIGN - 1)
+
+ orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED)
+ orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN)
+
+AR_CLASS(mcr p15, 0, r5, c6, c8, 0) @ PRBAR0
+AR_CLASS(mcr p15, 0, r6, c6, c8, 1) @ PRLAR0
+M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(0)])
+M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(0)])
#endif
- /* Enable the MPU */
-AR_CLASS(mrc p15, 0, r0, c1, c0, 0) @ Read SCTLR
-AR_CLASS(bic r0, r0, #CR_BR) @ Disable the 'default mem-map'
-AR_CLASS(orr r0, r0, #CR_M) @ Set SCTRL.M (MPU on)
-AR_CLASS(mcr p15, 0, r0, c1, c0, 0) @ Enable MPU
+ ldr r5, =KERNEL_START
+ ldr r6, =KERNEL_END
+ sub r6, r6, #1
+ bic r6, r6, #(PMSAv8_MINALIGN - 1)
-M_CLASS(ldr r0, [r12, #MPU_CTRL])
-M_CLASS(bic r0, #MPU_CTRL_PRIVDEFENA)
-M_CLASS(orr r0, #MPU_CTRL_ENABLE)
-M_CLASS(str r0, [r12, #MPU_CTRL])
+ orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED)
+ orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN)
+
+AR_CLASS(mcr p15, 0, r5, c6, c8, 4) @ PRBAR1
+AR_CLASS(mcr p15, 0, r6, c6, c8, 5) @ PRLAR1
+M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(1)])
+M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(1)])
+
+ /* Setup Background: 0x0 - min(KERNEL_START, XIP_PHYS_ADDR) */
+#ifdef CONFIG_XIP_KERNEL
+ ldr r6, =KERNEL_START
+ ldr r5, =CONFIG_XIP_PHYS_ADDR
+ cmp r6, r5
+ movcs r6, r5
+#else
+ ldr r6, =KERNEL_START
+#endif
+ cmp r6, #0
+ beq 1f
+
+ mov r5, #0
+ sub r6, r6, #1
+ bic r6, r6, #(PMSAv8_MINALIGN - 1)
+
+ orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN)
+ orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN)
+
+AR_CLASS(mcr p15, 0, r5, c6, c9, 0) @ PRBAR2
+AR_CLASS(mcr p15, 0, r6, c6, c9, 1) @ PRLAR2
+M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(2)])
+M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(2)])
+
+1:
+ /* Setup Background: max(KERNEL_END, _exiprom) - 0xffffffff */
+#ifdef CONFIG_XIP_KERNEL
+ ldr r5, =KERNEL_END
+ ldr r6, =(_exiprom)
+ cmp r5, r6
+ movcc r5, r6
+#else
+ ldr r5, =KERNEL_END
+#endif
+ mov r6, #0xffffffff
+ bic r6, r6, #(PMSAv8_MINALIGN - 1)
+
+ orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN)
+ orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN)
+
+AR_CLASS(mcr p15, 0, r5, c6, c9, 4) @ PRBAR3
+AR_CLASS(mcr p15, 0, r6, c6, c9, 5) @ PRLAR3
+M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(3)])
+M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(3)])
+
+#ifdef CONFIG_XIP_KERNEL
+ /* Setup Background: min(_exiprom, KERNEL_END) - max(KERNEL_START, XIP_PHYS_ADDR) */
+ ldr r5, =(_exiprom)
+ ldr r6, =KERNEL_END
+ cmp r5, r6
+ movcs r5, r6
+
+ ldr r6, =KERNEL_START
+ ldr r0, =CONFIG_XIP_PHYS_ADDR
+ cmp r6, r0
+ movcc r6, r0
+
+ sub r6, r6, #1
+ bic r6, r6, #(PMSAv8_MINALIGN - 1)
+
+ orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN)
+ orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN)
+
+#ifdef CONFIG_CPU_V7M
+ /* There is no alias for n == 4 */
+ mov r0, #4
+ str r0, [r12, #PMSAv8_RNR] @ PRSEL
isb
+ str r5, [r12, #PMSAv8_RBAR_A(0)]
+ str r6, [r12, #PMSAv8_RLAR_A(0)]
+#else
+ mcr p15, 0, r5, c6, c10, 1 @ PRBAR4
+ mcr p15, 0, r6, c6, c10, 2 @ PRLAR4
+#endif
+#endif
ret lr
-ENDPROC(__setup_mpu)
+ENDPROC(__setup_pmsa_v8)
#ifdef CONFIG_SMP
/*
* r6: pointer at mpu_rgn_info
*/
+ .text
ENTRY(__secondary_setup_mpu)
+ /* Use MPU region info supplied by __cpu_up */
+ ldr r6, [r7] @ get secondary_data.mpu_rgn_info
+
/* Probe for v7 PMSA compliance */
mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
and r0, r0, #(MMFR0_PMSA) @ PMSA field
teq r0, #(MMFR0_PMSAv7) @ PMSA v7
- bne __error_p
+ beq __secondary_setup_pmsa_v7
+ teq r0, #(MMFR0_PMSAv8) @ PMSA v8
+ beq __secondary_setup_pmsa_v8
+ b __error_p
+ENDPROC(__secondary_setup_mpu)
+/*
+ * r6: pointer at mpu_rgn_info
+ */
+ENTRY(__secondary_setup_pmsa_v7)
/* Determine whether the D/I-side memory map is unified. We set the
* flags here and continue to use them for the rest of this function */
mrc p15, 0, r0, c0, c0, 4 @ MPUIR
ldr r6, [r3, #MPU_RGN_DRSR]
ldr r5, [r3, #MPU_RGN_DRACR]
- setup_region r0, r5, r6, MPU_DATA_SIDE
+ setup_region r0, r5, r6, PMSAv7_DATA_SIDE
beq 2f
- setup_region r0, r5, r6, MPU_INSTR_SIDE
+ setup_region r0, r5, r6, PMSAv7_INSTR_SIDE
2: isb
mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR
cmp r4, #0
bgt 1b
- /* Enable the MPU */
- mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
- bic r0, r0, #CR_BR @ Disable the 'default mem-map'
- orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
- mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
+ ret lr
+ENDPROC(__secondary_setup_pmsa_v7)
+
+ENTRY(__secondary_setup_pmsa_v8)
+ ldr r4, [r6, #MPU_RNG_INFO_USED]
+#ifndef CONFIG_XIP_KERNEL
+ add r4, r4, #1
+#endif
+ mov r5, #MPU_RNG_SIZE
+ add r3, r6, #MPU_RNG_INFO_RNGS
+ mla r3, r4, r5, r3
+
+1:
+ sub r3, r3, #MPU_RNG_SIZE
+ sub r4, r4, #1
+
+ mcr p15, 0, r4, c6, c2, 1 @ PRSEL
isb
- ret lr
-ENDPROC(__secondary_setup_mpu)
+ ldr r5, [r3, #MPU_RGN_PRBAR]
+ ldr r6, [r3, #MPU_RGN_PRLAR]
+
+ mcr p15, 0, r5, c6, c3, 0 @ PRBAR
+ mcr p15, 0, r6, c6, c3, 1 @ PRLAR
+
+ cmp r4, #0
+ bgt 1b
+ ret lr
+ENDPROC(__secondary_setup_pmsa_v8)
#endif /* CONFIG_SMP */
#endif /* CONFIG_ARM_MPU */
#include "head-common.S"
projects / linux-2.6-microblaze.git / blobdiff