Merge tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...

[linux-2.6-microblaze.git] / arch / arm / boot / dts / sun8i-v40-bananapi-m2-berry.dts

diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index f05cabd..15c22b0 100644 (file)
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -50,6 +50,7 @@
        compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
 
        aliases {
+               ethernet0 = &gmac;
                serial0 = &uart0;
        };
 
@@ -57,6 +58,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
@@ -84,14 +96,52 @@
        wifi_pwrseq: wifi_pwrseq {
                compatible = "mmc-pwrseq-simple";
                reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+               clocks = <&ccu CLK_OUTA>;
+               clock-names = "ext_clock";
        };
 };
 
+&ahci {
+       ahci-supply = <&reg_dldo4>;
+       phy-supply = <&reg_eldo3>;
+       status = "okay";
+};
+
+&de {
+       status = "okay";
+};
+
 &ehci1 {
        /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
        status = "okay";
 };
 
+&gmac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac_rgmii_pins>;
+       phy-handle = <&phy1>;
+       phy-mode = "rgmii";
+       phy-supply = <&reg_dc1sw>;
+       status = "okay";
+};
+
+&gmac_mdio {
+       phy1: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
        status = "okay";
 
@@ -123,6 +173,23 @@
        status = "okay";
 };
 
+&pio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&clk_out_a_pin>;
+       vcc-pa-supply = <&reg_aldo2>;
+       vcc-pc-supply = <&reg_dcdc1>;
+       vcc-pd-supply = <&reg_dcdc1>;
+       vcc-pe-supply = <&reg_eldo1>;
+       vcc-pf-supply = <&reg_dcdc1>;
+       vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+       regulator-min-microvolt = <2500000>;
+       regulator-max-microvolt = <2500000>;
+       regulator-name = "vcc-pa";
+};
+
 &reg_aldo3 {
        regulator-always-on;
        regulator-min-microvolt = <2700000>;
@@ -130,6 +197,12 @@
        regulator-name = "avcc";
 };
 
+&reg_dc1sw {
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-gmac-phy";
+};
+
 &reg_dcdc1 {
        regulator-always-on;
        regulator-min-microvolt = <3000000>;
@@ -164,18 +237,68 @@
        regulator-name = "vcc-wifi-io";
 };
 
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
 &reg_dldo2 {
+       regulator-always-on;
        regulator-min-microvolt = <3300000>;
        regulator-max-microvolt = <3300000>;
        regulator-name = "vcc-wifi";
 };
 
+&reg_dldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+       regulator-min-microvolt = <2500000>;
+       regulator-max-microvolt = <2500000>;
+       regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+       regulator-min-microvolt = <1200000>;
+       regulator-max-microvolt = <1200000>;
+       regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               clocks = <&ccu CLK_OUTA>;
+               clock-names = "lpo";
+               vbat-supply = <&reg_dldo2>;
+               vddio-supply = <&reg_dldo1>;
+               device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+               /* TODO host wake line connected to PMIC GPIO pins */
+               shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+               max-speed = <1500000>;
+       };
+};
+
 &usbphy {
        usb1_vbus-supply = <&reg_vcc5v0>;
        status = "okay";