#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
/ {
model = "TBS A711 Tablet";
};
};
+ reg_gps: reg-gps {
+ compatible = "regulator-fixed";
+ regulator-name = "gps";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
reg_vbat: reg-vbat {
compatible = "regulator-fixed";
regulator-name = "vbat";
status = "okay";
};
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ accelerometer@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
+ };
+};
+
&mmc0 {
vmmc-supply = <®_dcdc1>;
pinctrl-names = "default";
status = "okay";
};
+&r_lradc {
+ vref-supply = <®_aldo2>;
+ status = "okay";
+
+ button-210 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <210000>;
+ };
+
+ button-410 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <410000>;
+ };
+};
+
&r_rsb {
status = "okay";
};
&tcon0_out {
- tcon0_out_lcd: endpoint@0 {
- reg = <0>;
+ tcon0_out_lcd: endpoint {
remote-endpoint = <&panel_input>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm20702a1";
+ clocks = <&ac100_rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <®_vbat>;
+ vddio-supply = <®_dldo1>;
+ device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ max-speed = <1500000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pb_pins>;
status = "okay";
+
+ gnss {
+ compatible = "u-blox,neo-6m";
+
+ v-bckp-supply = <®_rtc_ldo>;
+ vcc-supply = <®_gps>;
+ current-speed = <9600>;
+ };
};
&usb_otg {
&usbphy {
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
usb0_vbus-supply = <®_drivevbus>;
- usb1_vbus_supply = <®_vmain>;
- usb2_vbus_supply = <®_vmain>;
+ usb1_vbus-supply = <®_vmain>;
+ usb2_vbus-supply = <®_vmain>;
status = "okay";
};