ARM: dts: Move .dts files to vendor sub-directories

[linux-2.6-microblaze.git] / arch / arm / boot / dts / sun5i-a10s-auxtek-t004.dts

diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
deleted file mode 100644 (file)
index 667bc2d..0000000
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a10s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       model = "Auxtek t004 A10s hdmi tv-stick";
-       compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
-
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_t004>;
-
-               led {
-                       label = "t004-tv-dongle:red:usr";
-                       gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
-                       default-state = "on";
-               };
-       };
-
-       reg_vmmc1: vmmc1 {
-               compatible = "regulator-fixed";
-               regulator-name = "vmmc1";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               enable-active-high;
-               gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
-       };
-};
-
-&ehci0 {
-       status = "okay";
-};
-
-&i2c0 {
-       status = "okay";
-
-       axp152: pmic@30 {
-               compatible = "x-powers,axp152";
-               reg = <0x30>;
-               interrupts = <0>;
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-};
-
-&mmc0 {
-       vmmc-supply = <&reg_vcc3v3>;
-       bus-width = <4>;
-       cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
-       status = "okay";
-};
-
-&mmc1 {
-       vmmc-supply = <&reg_vmmc1>;
-       bus-width = <4>;
-       non-removable;
-       cap-sdio-irq;
-       status = "okay";
-};
-
-&ohci0 {
-       status = "okay";
-};
-
-&otg_sram {
-       status = "okay";
-};
-
-&pio {
-       led_pins_t004: led-pin {
-               pins = "PB2";
-               function = "gpio_out";
-               drive-strength = <20>;
-       };
-};
-
-&reg_usb1_vbus {
-       gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pb_pins>;
-       status = "okay";
-};
-
-&usb_otg {
-       dr_mode = "otg";
-       status = "okay";
-};
-
-&usbphy {
-       usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
-       usb1_vbus-supply = <&reg_usb1_vbus>;
-       status = "okay";
-};