brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
default-brightness-level = <8>;
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_panel_bl>;
status = "okay";
};
poll-interval = <20>;
/*
- * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
+ * The EXTi IRQ line 3 is shared with ethernet,
* so mark this as polled GPIO key.
*/
button-0 {
gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
};
+ /*
+ * The EXTi IRQ line 6 is shared with touchscreen,
+ * so mark this as polled GPIO key.
+ */
+ button-1 {
+ label = "TA2-GPIO-B";
+ linux,code = <KEY_B>;
+ gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+ };
+
/*
* The EXTi IRQ line 0 is shared with PMIC,
* so mark this as polled GPIO key.
gpio-keys {
compatible = "gpio-keys";
- button-1 {
- label = "TA2-GPIO-B";
- linux,code = <KEY_B>;
- gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
- wakeup-source;
- };
-
button-3 {
label = "TA4-GPIO-D";
linux,code = <KEY_D>;
label = "green:led5";
gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
+ status = "disabled";
};
led-1 {
panel {
compatible = "edt,etm0700g0edh6";
backlight = <&display_bl>;
+ power-supply = <®_panel_bl>;
port {
lcd_panel_in: endpoint {
};
};
+ reg_panel_bl: regulator-panel-bl {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_backlight";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_panel_supply>;
+ };
+
+ reg_panel_supply: regulator-panel-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_supply";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ };
+
sound {
compatible = "audio-graph-card";
routing =
sgtl5000_tx_endpoint: endpoint@0 {
reg = <0>;
remote-endpoint = <&sai2a_endpoint>;
- frame-master;
- bitclock-master;
+ frame-master = <&sgtl5000_tx_endpoint>;
+ bitclock-master = <&sgtl5000_tx_endpoint>;
};
sgtl5000_rx_endpoint: endpoint@1 {
reg = <1>;
remote-endpoint = <&sai2b_endpoint>;
- frame-master;
- bitclock-master;
+ frame-master = <&sgtl5000_rx_endpoint>;
+ bitclock-master = <&sgtl5000_rx_endpoint>;
};
};
touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
- interrupt-parent = <&gpiog>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+ interrupt-parent = <&gpioc>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
};
};