kunit: Print test statistics on failure

[linux-2.6-microblaze.git] / arch / arm / boot / dts / stm32mp151.dtsi

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index fcd3230..bd289bf 100644 (file)
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1369,8 +1369,8 @@
                        reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
                        reg-names = "qspi", "qspi_mm";
                        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
-                              <&mdma1 22 0x2 0x100008 0x0 0x0>;
+                       dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+                              <&mdma1 22 0x2 0x10100008 0x0 0x0>;
                        dma-names = "tx", "rx";
                        clocks = <&rcc QSPI_K>;
                        resets = <&rcc QSPI_R>;
@@ -1416,12 +1416,6 @@
                        status = "disabled";
                };
 
-               stmmac_axi_config_0: stmmac-axi-config {
-                       snps,wr_osr_lmt = <0x7>;
-                       snps,rd_osr_lmt = <0x7>;
-                       snps,blen = <0 0 0 0 16 8 4>;
-               };
-
                ethernet0: ethernet@5800a000 {
                        compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
                        reg = <0x5800a000 0x2000>;
@@ -1447,6 +1441,12 @@
                        snps,axi-config = <&stmmac_axi_config_0>;
                        snps,tso;
                        status = "disabled";
+
+                       stmmac_axi_config_0: stmmac-axi-config {
+                               snps,wr_osr_lmt = <0x7>;
+                               snps,rd_osr_lmt = <0x7>;
+                               snps,blen = <0 0 0 0 16 8 4>;
+                       };
                };
 
                usbh_ohci: usb@5800c000 {