+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Gose board
- *
- * Copyright (C) 2014-2015 Renesas Electronics Corporation
- */
-
-/*
- * SSI-AK4643
- *
- * SW1: 1: AK4643
- * 2: CN22
- * 3: ADV7511
- *
- * This command is required when Playback/Capture
- *
- * amixer set "LINEOUT Mixer DACL" on
- * amixer set "DVC Out" 100%
- * amixer set "DVC In" 100%
- *
- * You can use Mute
- *
- * amixer set "DVC Out Mute" on
- * amixer set "DVC In Mute" on
- *
- * You can use Volume Ramp
- *
- * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
- * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
- * amixer set "DVC Out Ramp" on
- * aplay xxx.wav &
- * amixer set "DVC Out" 80% // Volume Down
- * amixer set "DVC Out" 100% // Volume Up
- */
-
-/dts-v1/;
-#include "r8a7793.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Gose";
- compatible = "renesas,gose", "renesas,r8a7793";
-
- aliases {
- serial0 = &scif0;
- serial1 = &scif1;
- i2c9 = &gpioi2c2;
- i2c10 = &gpioi2c4;
- i2c11 = &i2chdmi;
- i2c12 = &i2cexio4;
- mmc0 = &sdhi0;
- mmc1 = &sdhi1;
- mmc2 = &sdhi2;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:115200n8";
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- keyboard {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&keyboard_pins>;
- pinctrl-names = "default";
-
- key-1 {
- gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_1>;
- label = "SW2-1";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-2 {
- gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_2>;
- label = "SW2-2";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-3 {
- gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_3>;
- label = "SW2-3";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-4 {
- gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_4>;
- label = "SW2-4";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-a {
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_A>;
- label = "SW30";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-b {
- gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_B>;
- label = "SW31";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-c {
- gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_C>;
- label = "SW32";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-d {
- gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_D>;
- label = "SW33";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-e {
- gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_E>;
- label = "SW34";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-f {
- gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_F>;
- label = "SW35";
- wakeup-source;
- debounce-interval = <20>;
- };
- key-g {
- gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_G>;
- label = "SW36";
- wakeup-source;
- debounce-interval = <20>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led6 {
- gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- label = "LED6";
- };
- led7 {
- gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
- label = "LED7";
- };
- led8 {
- gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
- label = "LED8";
- };
- };
-
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vcc_sdhi1: regulator-vcc-sdhi1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI1 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi1: regulator-vccq-sdhi1 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI1 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- vcc_sdhi2: regulator-vcc-sdhi2 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi2: regulator-vccq-sdhi2 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI2 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- audio_clock: audio_clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <11289600>;
- };
-
- rsnd_ak4643: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4643>;
- clocks = <&audio_clock>;
- };
- };
-
- hdmi-in {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&adv7612_in>;
- };
- };
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_out: endpoint {
- remote-endpoint = <&adv7511_out>;
- };
- };
- };
-
- composite-in {
- compatible = "composite-video-connector";
-
- port {
- composite_con_in: endpoint {
- remote-endpoint = <&adv7180_in>;
- };
- };
- };
-
- x2_clk: x2-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <74250000>;
- };
-
- x13_clk: x13-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <148500000>;
- };
-
- gpioi2c2: i2c-9 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- status = "disabled";
- scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <5>;
- };
-
- gpioi2c4: i2c-10 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- status = "disabled";
- scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <5>;
- };
-
- /*
- * A fallback to GPIO is provided for I2C2.
- */
- i2chdmi: i2c-11 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&i2c2>, <&gpioi2c2>;
- i2c-bus-name = "i2c-hdmi";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
- };
-
- composite-in@20 {
- compatible = "adi,adv7180cp";
- reg = <0x20>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7180_in: endpoint {
- remote-endpoint = <&composite_con_in>;
- };
- };
-
- port@3 {
- reg = <3>;
- adv7180_out: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep>;
- };
- };
- };
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio3>;
- interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-
- hdmi-in@4c {
- compatible = "adi,adv7612";
- reg = <0x4c>;
- interrupt-parent = <&gpio4>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- default-input = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7612_in: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
- };
-
- port@2 {
- reg = <2>;
- adv7612_out: endpoint {
- remote-endpoint = <&vin0ep2>;
- };
- };
- };
- };
-
- eeprom@50 {
- compatible = "renesas,r1ex24002", "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
- };
-
- /*
- * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
- * A fallback to GPIO is provided.
- */
- i2cexio4: i2c-12 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&i2c4>, <&gpioi2c4>;
- i2c-bus-name = "i2c-exio4";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
-
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
- <&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
-
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7511_in>;
- };
- };
- };
-};
-
-&lvds0 {
- ports {
- port@1 {
- lvds_connector: endpoint {
- };
- };
- };
-};
-
-&extal_clk {
- clock-frequency = <20000000>;
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- i2c2_pins: i2c2 {
- groups = "i2c2";
- function = "i2c2";
- };
-
- i2c4_pins: i2c4 {
- groups = "i2c4_c";
- function = "i2c4";
- };
-
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
- function = "du";
- };
-
- scif0_pins: scif0 {
- groups = "scif0_data_d";
- function = "scif0";
- };
-
- scif1_pins: scif1 {
- groups = "scif1_data_d";
- function = "scif1";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk";
- function = "scif_clk";
- };
-
- ether_pins: ether {
- groups = "eth_link", "eth_mdio", "eth_rmii";
- function = "eth";
- };
-
- phy1_pins: phy1 {
- groups = "intc_irq0";
- function = "intc";
- };
-
- pmic_irq_pins: pmicirq {
- groups = "intc_irq2";
- function = "intc";
- };
-
- sdhi0_pins: sd0 {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <3300>;
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
- power-source = <1800>;
- };
-
- sdhi1_pins: sd1 {
- groups = "sdhi1_data4", "sdhi1_ctrl";
- function = "sdhi1";
- power-source = <3300>;
- };
-
- sdhi1_pins_uhs: sd1_uhs {
- groups = "sdhi1_data4", "sdhi1_ctrl";
- function = "sdhi1";
- power-source = <1800>;
- };
-
- sdhi2_pins: sd2 {
- groups = "sdhi2_data4", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <3300>;
- };
-
- sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data4", "sdhi2_ctrl";
- function = "sdhi2";
- power-source = <1800>;
- };
-
- qspi_pins: qspi {
- groups = "qspi_ctrl", "qspi_data4";
- function = "qspi";
- };
-
- sound_pins: sound {
- groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
- function = "ssi";
- };
-
- sound_clk_pins: sound_clk {
- groups = "audio_clk_a";
- function = "audio_clk";
- };
-
- keyboard_pins: keyboard {
- pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
- bias-pull-up;
- };
-
- vin0_pins: vin0 {
- groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
- function = "vin0";
- };
-
- vin1_pins: vin1 {
- groups = "vin1_data8", "vin1_clk";
- function = "vin1";
- };
-};
-
-ðer {
- pinctrl-0 = <ðer_pins>, <&phy1_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy1>;
- renesas,ether-link-active-low;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- compatible = "ethernet-phy-id0022.1537",
- "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- interrupt-parent = <&irqc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- micrel,led-mode = <1>;
- reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
- };
-};
-
-&cmt0 {
- status = "okay";
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_dvfs>;
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <14745600>;
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdhi1 {
- pinctrl-0 = <&sdhi1_pins>;
- pinctrl-1 = <&sdhi1_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi1>;
- vqmmc-supply = <&vccq_sdhi1>;
- cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-1 = <&sdhi2_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi2>;
- vqmmc-supply = <&vccq_sdhi2>;
- cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&qspi {
- pinctrl-0 = <&qspi_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash@0 {
- compatible = "spansion,s25fl512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- spi-cpol;
- spi-cpha;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash";
- reg = <0x00440000 0x03bc0000>;
- };
- };
- };
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "i2c-hdmi";
-
- status = "okay";
- clock-frequency = <100000>;
-
-};
-
-&i2c6 {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_irq_pins>;
- status = "okay";
- clock-frequency = <100000>;
-
- pmic@58 {
- compatible = "dlg,da9063";
- reg = <0x58>;
- interrupt-parent = <&irqc0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- watchdog {
- compatible = "dlg,da9063-watchdog";
- };
- };
-
- vdd_dvfs: regulator@68 {
- compatible = "dlg,da9210";
- reg = <0x68>;
- interrupt-parent = <&irqc0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&i2c4 {
- pinctrl-0 = <&i2c4_pins>;
- pinctrl-names = "i2c-exio4";
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- status = "okay";
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0>, <&src2>, <&dvc0>;
- capture = <&ssi1>, <&src3>, <&dvc1>;
- };
- };
-};
-
-&ssi1 {
- shared-pin;
-};
-
-/* HDMI video input */
-&vin0 {
- status = "okay";
- pinctrl-0 = <&vin0_pins>;
- pinctrl-names = "default";
-
- port {
- vin0ep2: endpoint {
- remote-endpoint = <&adv7612_out>;
- bus-width = <24>;
- hsync-active = <0>;
- vsync-active = <0>;
- pclk-sample = <1>;
- data-active = <1>;
- };
- };
-};
-
-/* composite video input */
-&vin1 {
- pinctrl-0 = <&vin1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- port {
- vin1ep: endpoint {
- remote-endpoint = <&adv7180_out>;
- bus-width = <8>;
- };
- };
-};
projects / linux-2.6-microblaze.git / blobdiff