reg = <0x80000000 0x200000>;
no-map;
};
+
+ wcnss_mem: wcnss@8f000000 {
+ reg = <0x8f000000 0x700000>;
+ no-map;
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
cpu-idle-states = <&CPU_SPC>;
};
- cpu@1 {
+ CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
cpu-idle-states = <&CPU_SPC>;
};
- cpu@2 {
+ CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
cpu-idle-states = <&CPU_SPC>;
};
- cpu@3 {
+ CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v1";
device_type = "cpu";
};
clocks {
- cxo_board {
+ cxo_board: cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-names = "core";
};
+ ssbi@c00000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00c00000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+
+ pm8821: pmic@1 {
+ compatible = "qcom,pm8821";
+ interrupt-parent = <&tlmm_pinmux>;
+ interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+ interrupts = <24 IRQ_TYPE_NONE>,
+ <25 IRQ_TYPE_NONE>,
+ <26 IRQ_TYPE_NONE>,
+ <27 IRQ_TYPE_NONE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
hdmi: hdmi-tx@4a00000 {
compatible = "qcom,hdmi-tx-8960";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pinctrl>;
reg = <0x04a00000 0x2f0>;
reg-names = "core_physical";
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
+
+ riva: riva-pil@3204000 {
+ compatible = "qcom,riva-pil";
+
+ reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal";
+
+ memory-region = <&wcnss_mem>;
+
+ vddcx-supply = <&pm8921_s3>;
+ vddmx-supply = <&pm8921_l24>;
+ vddpx-supply = <&pm8921_s4>;
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3660";
+
+ clocks = <&cxo_board>;
+ clock-names = "xo";
+
+ vddxo-supply = <&pm8921_l4>;
+ vddrfa-supply = <&pm8921_s2>;
+ vddpa-supply = <&pm8921_l10>;
+ vdddig-supply = <&pm8921_lvs2>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&l2cc 8 25>;
+ qcom,smd-edge = <6>;
+
+ label = "riva";
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&riva>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
+ etb@1a01000 {
+ compatible = "coresight-etb10", "arm,primecell";
+ reg = <0x1a01000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ tpiu@1a03000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x1a03000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port@2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out>;
+ };
+ };
+ };
+ };
+
+ funnel@1a04000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x1a04000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 2 - connected to STM component
+ * 3 - not-connected
+ * 6 - not-connected
+ * 7 - not-connected
+ */
+ port@0 {
+ reg = <0>;
+ funnel_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@4 {
+ reg = <4>;
+ funnel_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@5 {
+ reg = <5>;
+ funnel_in5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ funnel_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etm@1a1c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
+ };
+ };
+
+ etm@1a1d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
+ };
+ };
+
+ etm@1a1e000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
+ };
+ };
+
+ etm@1a1f000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x1a1f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
+ };
+ };
};
};
#include "qcom-apq8064-pins.dtsi"
projects / linux-2.6-microblaze.git / blobdiff