-/*
- * Copyright 2017 Armadeus Systems <support@armadeus.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
#include "imx6ul.dtsi"
-
-/ {
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0>; /* will be filled by U-Boot */
- };
-
- reg_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- usdhc3_pwrseq: usdhc3-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
- };
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-reset-duration = <1>;
- phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
- phy-handle = <ðphy1>;
- phy-supply = <®_3v3>;
- status = "okay";
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- interrupt-parent = <&gpio4>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
- status = "okay";
- };
- };
-};
-
-/* Bluetooth */
-&uart8 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart8>;
- uart-has-rtscts;
- status = "okay";
-};
-
-/* eMMC */
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- bus-width = <8>;
- no-1-8-v;
- non-removable;
- status = "okay";
-};
-
-/* WiFi */
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- bus-width = <4>;
- no-1-8-v;
- non-removable;
- mmc-pwrseq = <&usdhc3_pwrseq>;
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio2>;
- interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "host-wake";
- };
-};
-
-&iomuxc {
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
- MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
- MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- /* INT# */
- MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
- /* RST# */
- MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- >;
- };
-
- pinctrl_uart8: uart8grp {
- fsl,pins = <
- MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
- /* BT_REG_ON */
- MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
- MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
- MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
- MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
- MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
- MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
- MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
- MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
- MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
- /* WL_REG_ON */
- MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
- /* WL_IRQ */
- MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
- >;
- };
-};
+#include "imx6ul-imx6ull-opos6ul.dtsi"
projects / linux-2.6-microblaze.git / blobdiff