+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
- model = "Freescale i.MX6 Quad Armadillo2 Board";
- compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x80000000>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- debug-led {
- label = "Heartbeat";
- gpios = <&gpio3 25 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- status = "disabled"; /* gpmi nand conflicts with SD */
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- imx6q-arm2 {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
- >;
- };
-
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
- >;
- };
-
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
- >;
- };
-
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc3_cdwp: usdhc3cdwp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
- MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
- >;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
- MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
- MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
- MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
- MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
- >;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
- /delete-property/ interrupts;
- interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
- fsl,err006687-workaround-present;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- status = "okay";
-};
-
-&usdhc3 {
- cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
- vmmc-supply = <®_3p3v>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3
- &pinctrl_usdhc3_cdwp>;
- status = "okay";
-};
-
-&usdhc4 {
- non-removable;
- vmmc-supply = <®_3p3v>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- fsl,dte-mode;
- uart-has-rtscts;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
-};
projects / linux-2.6-microblaze.git / blobdiff