ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

[linux-2.6-microblaze.git] / arch / arm / boot / dts / imx28-apx4devkit.dts

diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index cb19dc1..6f254ca 100644 (file)
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -48,9 +48,9 @@
                                                MX28_PAD_LCD_RESET__GPIO_3_30
                                                MX28_PAD_JTAG_RTCK__GPIO_4_20
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                lcdif_pins_apx4: lcdif-apx4@0 {
@@ -61,9 +61,9 @@
                                                MX28_PAD_LCD_RS__LCD_DOTCLK
                                                MX28_PAD_LCD_CS__LCD_ENABLE
                                        >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
 
                                mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
@@ -76,17 +76,17 @@
                                                MX28_PAD_SSP2_SS1__SSP2_D1
                                                MX28_PAD_SSP2_SS2__SSP2_D2
                                        >;
-                                       fsl,drive-strength = <1>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
 
                                mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
                                        fsl,pinmux-ids = <
                                                MX28_PAD_SSP0_DATA7__SSP2_SCK
                                        >;
-                                       fsl,drive-strength = <2>;
-                                       fsl,pull-up = <0>;
+                                       fsl,drive-strength = <MXS_DRIVE_12mA>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
                                };
                        };