};
chosen {
- bootargs = "console=ttySAC3,115200";
+ stdout-path = "serial3:115200n8";
};
firmware@2073000 {
};
};
+&adc {
+ vdd-supply = <&ldo4_reg>;
+ status = "okay";
+};
+
+&cci {
+ status = "disabled";
+};
+
&cpu0 {
cpu-supply = <&buck2_reg>;
};
cpu-supply = <&buck6_reg>;
};
-&usbdrd_dwc3_1 {
- dr_mode = "host";
+&cpu0_thermal {
+ trips {
+ cpu0_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu0_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu0_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu0_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * Reduce the CPU speed by 2 steps, down to: 1600 MHz
+ * and 1100 MHz.
+ */
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ /*
+ * Reduce the CPU speed down to 1200 MHz big (6 steps)
+ * and 800 MHz LITTLE (5 steps).
+ */
+ map1 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ /*
+ * Reduce the CPU speed as much as possible, down to 700 MHz
+ * big (11 steps) and 600 MHz LITTLE (7 steps).
+ */
+ map2 {
+ trip = <&cpu0_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 5 7>,
+ <&cpu5 5 7>,
+ <&cpu6 5 7>,
+ <&cpu7 5 7>;
+ };
+ };
};
-&cci {
- status = "disabled";
+&cpu1_thermal {
+ trips {
+ cpu1_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu1_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu1_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu1_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ map2 {
+ trip = <&cpu1_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 5 7>,
+ <&cpu5 5 7>,
+ <&cpu6 5 7>,
+ <&cpu7 5 7>;
+ };
+ };
+};
+
+&cpu2_thermal {
+ trips {
+ cpu2_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu2_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu2_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu2_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ map2 {
+ trip = <&cpu2_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 6 7>,
+ <&cpu5 6 7>,
+ <&cpu6 6 7>,
+ <&cpu7 6 7>;
+ };
+ };
+};
+
+&cpu3_thermal {
+ trips {
+ cpu3_alert0: cpu-alert-0 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu3_alert1: cpu-alert-1 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu3_alert2: cpu-alert-2 {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu3_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&cpu0 0 2>,
+ <&cpu1 0 2>,
+ <&cpu2 0 2>,
+ <&cpu3 0 2>,
+ <&cpu4 0 2>,
+ <&cpu5 0 2>,
+ <&cpu6 0 2>,
+ <&cpu7 0 2>;
+ };
+
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&cpu0 3 6>,
+ <&cpu1 3 6>,
+ <&cpu2 3 6>,
+ <&cpu3 3 6>,
+ <&cpu4 3 5>,
+ <&cpu5 3 5>,
+ <&cpu6 3 5>,
+ <&cpu7 3 5>;
+ };
+
+ map2 {
+ trip = <&cpu3_alert2>;
+ cooling-device = <&cpu0 6 11>,
+ <&cpu1 6 11>,
+ <&cpu2 6 11>,
+ <&cpu3 6 11>,
+ <&cpu4 5 7>,
+ <&cpu5 5 7>,
+ <&cpu6 5 7>,
+ <&cpu7 5 7>;
+ };
+ };
};
&hdmi {
regulator-name = "PVDD_APIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "PVDD_APIO_MMCON_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ /*
+ * Must be always on, even though there is
+ * a consumer (mmc_0). Otherwise the board
+ * does not reboot with vendor U-Boot
+ * (Linaro for Arndale Octa, v2012.07).
+ */
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo4_reg: LDO4 {
regulator-name = "PVDD_ANAIP_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo8_reg: LDO8 {
regulator-name = "PVDD_ABB_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo9_reg: LDO9 {
ldo13_reg: LDO13 {
regulator-name = "PVDD_APIO_MMCOFF_2V8";
- regulator-min-microvolt = <2800000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ /* Unused */
+ regulator-name = "PVDD_LDO14";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
};
ldo15_reg: LDO15 {
regulator-name = "PVDD_PERI_2V8";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo16_reg: LDO16 {
regulator-name = "PVDD_PERI_3V3";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ /* Unused */
+ regulator-name = "PVDD_LDO17";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
};
ldo18_reg: LDO18 {
regulator-name = "PVDD_EMMC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ /*
+ * Must stay in "off" mode during shutdown for
+ * proper eMMC reset. The "off" mode is in
+ * fact controlled by LDO18EN. The eMMC does
+ * not have reset pin connected so the reset
+ * will be triggered by falling edge of
+ * LDO18EN.
+ */
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo19_reg: LDO19 {
regulator-name = "PVDD_TFLASH_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo20_reg: LDO20 {
regulator-max-microvolt = <1800000>;
};
+ ldo22_reg: LDO22 {
+ /* Unused */
+ regulator-name = "PVDD_LDO22";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
ldo23_reg: LDO23 {
regulator-name = "PVDD_MIFS_1V1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo24_reg: LDO24 {
regulator-name = "PVDD_CAM1_AVDD_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo25_reg: LDO25 {
+ /* Unused */
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
};
ldo26_reg: LDO26 {
ldo27_reg: LDO27 {
regulator-name = "PVDD_G3DS_1V0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo28_reg: LDO28 {
regulator-max-microvolt = <1800000>;
};
+ ldo30_reg: LDO30 {
+ /* Unused */
+ regulator-name = "PVDD_LDO30";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo31_reg: LDO31 {
regulator-name = "PVDD_PERI_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+ ldo34_reg: LDO34 {
+ /* Unused */
+ regulator-name = "PVDD_LDO34";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo35_reg: LDO35 {
regulator-name = "PVDD_CAM0_DVDD_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "PVDD_LDO36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "PVDD_LDO37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo38_reg: LDO38 {
regulator-name = "PVDD_CAM0_AVDD_2V8";
regulator-min-microvolt = <2800000>;
buck1_reg: BUCK1 {
regulator-name = "PVDD_MIF_1V1";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
regulator-name = "PVDD_INT_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
regulator-name = "PVDD_G3D_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
regulator-name = "PVDD_LPDDR3_1V2";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
regulator-always-on;
};
buck6_reg: BUCK6 {
regulator-name = "PVDD_KFC_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
regulator-name = "VIN_LLDO_1V4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "VIN_MLDO_2V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2000000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
regulator-always-on;
};
regulator-name = "PVDD_EMMCF_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ /*
+ * Must stay in "off" mode during shutdown for
+ * proper eMMC reset. The "off" mode is in
+ * fact controlled by BUCK10EN. The eMMC does
+ * not have reset pin connected so the reset
+ * will be triggered by falling edge of
+ * BUCK10EN.
+ */
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
};
};
&mmc_0 {
status = "okay";
- broken-cd;
+ non-removable;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
- vmmc-supply = <&ldo10_reg>;
+ vmmc-supply = <&ldo18_reg>;
+ vqmmc-supply = <&ldo3_reg>;
bus-width = <8>;
cap-mmc-highspeed;
+ mmc-hs200-1_8v;
};
&mmc_2 {
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
bus-width = <4>;
cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
};
&pinctrl_0 {
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
projects / linux-2.6-microblaze.git / blobdiff