ARM: dts: Move .dts files to vendor sub-directories

[linux-2.6-microblaze.git] / arch / arm / boot / dts / bcm2836-rpi-2-b.dts

diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
deleted file mode 100644 (file)
index 6068ec3..0000000
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2836.dtsi"
-#include "bcm2836-rpi.dtsi"
-#include "bcm283x-rpi-led-deprecated.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-       compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
-       model = "Raspberry Pi 2 Model B";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0 0x40000000>;
-       };
-};
-
-&gpio {
-       /*
-        * Taken from rpi_SCH_2b_1p2_reduced.pdf and
-        * the official GPU firmware DT blob.
-        *
-        * Legend:
-        * "FOO" = GPIO line named "FOO" on the schematic
-        * "FOO_N" = GPIO line named "FOO" on schematic, active low
-        */
-       gpio-line-names = "ID_SDA",
-                         "ID_SCL",
-                         "SDA1",
-                         "SCL1",
-                         "GPIO_GCLK",
-                         "GPIO5",
-                         "GPIO6",
-                         "SPI_CE1_N",
-                         "SPI_CE0_N",
-                         "SPI_MISO",
-                         "SPI_MOSI",
-                         "SPI_SCLK",
-                         "GPIO12",
-                         "GPIO13",
-                         /* Serial port */
-                         "TXD0",
-                         "RXD0",
-                         "GPIO16",
-                         "GPIO17",
-                         "GPIO18",
-                         "GPIO19",
-                         "GPIO20",
-                         "GPIO21",
-                         "GPIO22",
-                         "GPIO23",
-                         "GPIO24",
-                         "GPIO25",
-                         "GPIO26",
-                         "GPIO27",
-                         "SDA0",
-                         "SCL0",
-                         "", /* GPIO30 */
-                         "LAN_RUN",
-                         "CAM_GPIO1",
-                         "", /* GPIO33 */
-                         "", /* GPIO34 */
-                         "PWR_LOW_N",
-                         "", /* GPIO36 */
-                         "", /* GPIO37 */
-                         "USB_LIMIT",
-                         "", /* GPIO39 */
-                         "PWM0_OUT",
-                         "CAM_GPIO0",
-                         "SMPS_SCL",
-                         "SMPS_SDA",
-                         "ETH_CLK",
-                         "PWM1_OUT",
-                         "HDMI_HPD_N",
-                         "STATUS_LED",
-                         /* Used by SD Card */
-                         "SD_CLK_R",
-                         "SD_CMD_R",
-                         "SD_DATA0_R",
-                         "SD_DATA1_R",
-                         "SD_DATA2_R",
-                         "SD_DATA3_R";
-
-       pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-       /* I2S interface */
-       i2s_alt0: i2s_alt0 {
-               brcm,pins = <18 19 20 21>;
-               brcm,function = <BCM2835_FSEL_ALT0>;
-       };
-};
-
-&hdmi {
-       hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-       power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-       status = "okay";
-};
-
-&led_act {
-       gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-};
-
-&leds {
-       led-pwr {
-               label = "PWR";
-               gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-               default-state = "keep";
-               linux,default-trigger = "default-on";
-       };
-};
-
-&pwm {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-       status = "okay";
-};
-
-&sdhost {
-       pinctrl-names = "default";
-       pinctrl-0 = <&sdhost_gpio48>;
-       bus-width = <4>;
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_gpio14>;
-       status = "okay";
-};