ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes

[linux-2.6-microblaze.git] / arch / arm / boot / dts / at91sam9rl.dtsi

diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 12c6348..364a2ff 100644 (file)
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
        #address-cells = <1>;
@@ -175,6 +176,7 @@
                        usart0: serial@fffb0000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb0000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -188,6 +190,7 @@
                        usart1: serial@fffb4000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb4000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -201,6 +204,7 @@
                        usart2: serial@fffb8000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffb8000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -214,6 +218,7 @@
                        usart3: serial@fffbc000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfffbc000 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
                                atmel,use-dma-rx;
                                atmel,use-dma-tx;
@@ -322,6 +327,7 @@
                        dbgu: serial@fffff200 {
                                compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
                                reg = <0xfffff200 0x200>;
+                               atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;