Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh

[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / serial / rs485.yaml

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index d4beaf1..8141e4a 100644 (file)
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -6,40 +6,39 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RS485 serial communications Bindings
 
-description: The RTS signal is capable of automatically controlling
-             line direction for the built-in half-duplex mode.
-             The properties described hereafter shall be given to a
-             half-duplex capable UART node.
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
 
 maintainers:
-  -  Rob Herring <robh@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   rs485-rts-delay:
     description: prop-encoded-array <a b>
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          items:
-            - description:
-                Delay between rts signal and beginning of data sent in milliseconds.
-                It corresponds to the delay before sending data.
-              default: 0
-              maximum: 1000
-            - description:
-                Delay between end of data sent and rts signal in milliseconds.
-                It corresponds to the delay after sending data and actual release of the line.
-              default: 0
-              maximum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      items:
+        - description: Delay between rts signal and beginning of data sent in
+            milliseconds. It corresponds to the delay before sending data.
+          default: 0
+          maximum: 1000
+        - description: Delay between end of data sent and rts signal in milliseconds.
+            It corresponds to the delay after sending data and actual release
+            of the line.
+          default: 0
+          maximum: 1000
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
     $ref: /schemas/types.yaml#/definitions/flag
 
   linux,rs485-enabled-at-boot-time:
-    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
     $ref: /schemas/types.yaml#/definitions/flag
 
   rs485-rx-during-tx:
-   description: enables the receiving of data even while sending data.
-   $ref: /schemas/types.yaml#/definitions/flag
+    description: enables the receiving of data even while sending data.
+    $ref: /schemas/types.yaml#/definitions/flag
+...