dt-bindings: PCI: Convert generic host binding to DT schema

[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / pci / hisilicon-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 0dcb87d..d6796ef 100644 (file)
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -41,45 +41,3 @@ Hip05 Example (note that Hip06 is the same except compatible):
                                 0x0 0 0 3 &mbigen_pcie 3 12
                                 0x0 0 0 4 &mbigen_pcie 4 13>;
        };
-
-HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
-
-Some BIOSes place the host controller in a mode where it is ECAM
-compliant for all devices other than the root complex. In such cases,
-the host controller should be described as below.
-
-The properties and their meanings are identical to those described in
-host-generic-pci.txt except as listed below.
-
-Properties of the host controller node that differ from
-host-generic-pci.txt:
-
-- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
-                  "hisilicon,hip07-pcie-ecam"
-
-- reg            : Two entries: First the ECAM configuration space for any
-                  other bus underneath the root bus. Second, the base
-                  and size of the HiSilicon host bridge registers include
-                  the RC's own config space.
-
-Example:
-       pcie0: pcie@a0090000 {
-               compatible = "hisilicon,hip06-pcie-ecam";
-               reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
-                     <0 0xa0090000 0 0x10000>; /* host bridge registers */
-               bus-range = <0  31>;
-               msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
-               msi-map-mask = <0xffff>;
-               #address-cells = <3>;
-               #size-cells = <2>;
-               device_type = "pci";
-               dma-coherent;
-               ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
-                         0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
-               #interrupt-cells = <1>;
-               interrupt-map-mask = <0xf800 0 0 7>;
-               interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
-                                0x0 0 0 2 &mbigen_pcie0 650 4
-                                0x0 0 0 3 &mbigen_pcie0 650 4
-                                0x0 0 0 4 &mbigen_pcie0 650 4>;
-       };