dt-bindings: ti-lmu: Modify dt bindings for the LM3697

[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / mfd / ti-lmu.txt

diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index e3efefb..782d3c9 100644 (file)
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -8,7 +8,6 @@ TI LMU driver supports lighting devices below.
   LM3632       Backlight and regulator
   LM3633       Backlight, LED and fault monitor
   LM3695       Backlight
-  LM3697       Backlight and fault monitor
 
 Required properties:
   - compatible: Should be one of:
@@ -16,11 +15,10 @@ Required properties:
                 "ti,lm3632"
                 "ti,lm3633"
                 "ti,lm3695"
-                "ti,lm3697"
   - reg: I2C slave address.
          0x11 for LM3632
          0x29 for LM3631
-         0x36 for LM3633, LM3697
+         0x36 for LM3633
          0x63 for LM3695
 
 Optional properties:
@@ -51,7 +49,6 @@ Optional nodes:
     Required properties:
       - compatible: Should be one of:
                     "ti,lm3633-fault-monitor"
-                    "ti,lm3697-fault-monitor"
   - leds: LED properties for LM3633. Please refer to [2].
   - regulators: Regulator properties for LM3631 and LM3632.
                 Please refer to [3].
@@ -216,25 +213,3 @@ lm3695@63 {
                };
        };
 };
-
-lm3697@36 {
-       compatible = "ti,lm3697";
-       reg = <0x36>;
-
-       enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
-       backlight {
-               compatible = "ti,lm3697-backlight";
-
-               lcd {
-                       ti,brightness-resolution = <255>;
-                       led-sources = <0 1 2>;
-                       ramp-up-us = <200000>;
-                       ramp-down-us = <200000>;
-               };
-       };
-
-       fault-monitor {
-               compatible = "ti,lm3697-fault-monitor";
-       };
-};