Note that using this option lowers the security
provided by tboot because it makes the system
vulnerable to DMA attacks.
- nobounce [Default off]
- Disable bounce buffer for untrusted devices such as
- the Thunderbolt devices. This will treat the untrusted
- devices as the trusted ones, hence might expose security
- risks of DMA attacks.
intel_idle.max_cstate= [KNL,HW,ACPI,X86]
0 disables intel_idle and fall back on acpi_idle.
for all guests.
Default is 1 (enabled) if in 64-bit or 32-bit PAE mode.
+ kvm-arm.mode=
+ [KVM,ARM] Select one of KVM/arm64's modes of operation.
+
+ protected: nVHE-based mode with support for guests whose
+ state is kept private from the host.
+ Not valid if the kernel is running in EL2.
+
+ Defaults to VHE/nVHE based on hardware support and
+ the value of CONFIG_ARM64_VHE.
+
kvm-arm.vgic_v3_group0_trap=
[KVM,ARM] Trap guest accesses to GICv3 group-0
system registers
mtdset= [ARM]
ARM/S3C2412 JIVE boot control
- See arch/arm/mach-s3c2412/mach-jive.c
+ See arch/arm/mach-s3c/mach-jive.c
mtouchusb.raw_coordinates=
[HW] Make the MicroTouch USB driver use raw coordinates