do not want to use tracing_snapshot_alloc() as it needs
to be done where GFP_KERNEL allocations are allowed.
+ allow_mismatched_32bit_el0 [ARM64]
+ Allow execve() of 32-bit applications and setting of the
+ PER_LINUX32 personality on systems where only a strict
+ subset of the CPUs support 32-bit EL0. When this
+ parameter is present, the set of CPUs supporting 32-bit
+ EL0 is indicated by /sys/devices/system/cpu/aarch32_el0
+ and hot-unplug operations may be restricted.
+
+ See Documentation/arm64/asymmetric-32bit.rst for more
+ information.
+
amd_iommu= [HW,X86-64]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
arm64.nopauth [ARM64] Unconditionally disable Pointer Authentication
support
+ arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension
+ support
+
ataflop= [HW,M68k]
atarimouse= [HW,MOUSE] Atari Mouse
feature (tagged TLBs) on capable Intel chips.
Default is 1 (enabled)
+ l1d_flush= [X86,INTEL]
+ Control mitigation for L1D based snooping vulnerability.
+
+ Certain CPUs are vulnerable to an exploit against CPU
+ internal buffers which can forward information to a
+ disclosure gadget under certain conditions.
+
+ In vulnerable processors, the speculatively
+ forwarded data can be used in a cache side channel
+ attack, to access data to which the attacker does
+ not have direct access.
+
+ This parameter controls the mitigation. The
+ options are:
+
+ on - enable the interface for the mitigation
+
l1tf= [X86] Control mitigation of the L1TF vulnerability on
affected CPUs
Format: <bool> (1/Y/y=enable, 0/N/n=disable)
default: disabled
+ printk.console_no_auto_verbose=
+ Disable console loglevel raise on oops, panic
+ or lockdep-detected issues (only if lock debug is on).
+ With an exception to setups with low baudrate on
+ serial console, keeping this 0 is a good choice
+ in order to provide more debug information.
+ Format: <bool>
+ default: 0 (auto_verbose is enabled)
+
printk.devkmsg={on,off,ratelimit}
Control writing to /dev/kmsg.
on - unlimited logging to /dev/kmsg from userspace
reboot= [KNL]
Format (x86 or x86_64):
- [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \
+ [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] | d[efault] \
[[,]s[mp]#### \
[[,]b[ios] | a[cpi] | k[bd] | t[riple] | e[fi] | p[ci]] \
[[,]f[orce]
sa1100ir [NET]
See drivers/net/irda/sa1100_ir.c.
- sbni= [NET] Granch SBNI12 leased line adapter
-
sched_verbose [KNL] Enables verbose scheduler debug messages.
schedstats= [KNL,X86] Enable or disable scheduled statistics.